• Journal of the Korean Society of Safety
• /
• v.23 no.5
• /
• pp.54-60
• /
• 2008

The objective of this study is to obtain the optimal process condition and the maximum decomposition efficiency by measuring the decomposition efficiency, electricity consumption, and voltage in accordance with the change of the process variables such as the frequency, maintaining time period, concentration, electrode material, thickness of the electrode, the number of windings of the electrode, and added materials etc. of the harmful atmospheric contamination gases such as NO, $NO_2$, and $SO_2$ etc. with the plasma which is generated by the discharging of the specially designed and manufactured $TiO_2$ catalysis reactor and SPCP reactor. The decomposition efficiency of the NO, the standard samples, is obtained with the plasma which is being generated by the discharge of the combination effect of the $TiO_2$ catalysis reactor and SPCP reactor with the variation of those process variables such as the frequency of the high voltage generator($5{\sim}50kHz$), maintaining time of the harmful gases($1{\sim}10.5sec$), initial concentration($100{\sim}1,000ppm$), the material of the electrode(W, Cu, Al), the thickness of the electrode(1, 2, 3mm), the number of the windings of the electrode(7, 9, 11turns), basic gases($N_2$, $O_2$, air), and the simulated gas($CO_2$) and the resulting substances are analyzed by utilizing FT-IR & GC.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.2
• /
• pp.279-286
• /
• 2015

EMD is a fully data-driven signal processing method without using any predetermined basis function and requiring any user parameters setting. However EMD experiences a problem of mode mixing which interferes with decomposing the signal into similar oscillations within a mode. To overcome the problem, EEMD method was introduced. The algorithm performs the EMD method over an ensemble of the signal added independent identically distributed white noise of the same standard deviation. Even so EEMD created problems when the decomposition is complete. The ensemble of different signal with added noise may produce different number of modes and the reconstructed signal includes residual noise. This paper propose an modified EEMD method to overcome mode mixing of EMD, to provide an exact reconstruction of the original signal, and to separate modes with lower cost than EEMD's. The experimental results show that the proposed method provides a better separation of the modes with less number of sifting iterations, costs 20.87% for a complete decomposition of the signal and demonstrates superior performance in the signal reconstruction, compared with EEMD.

• Smart Structures and Systems
• /
• v.30 no.1
• /
• pp.75-88
• /
• 2022

Engineering structures in operation essentially belong to time-varying or nonlinear structures and the resultant response signals are usually non-stationary. For such time-varying structures, it is of great importance to extract time-dependent dynamic parameters from non-stationary response signals, which benefits structural health monitoring, safety assessment and vibration control. However, various traditional signal processing methods are unable to extract the embedded meaningful information. As a newly developed technique, variational mode decomposition (VMD) shows its superiority on signal decomposition, however, it still suffers two main problems. The foremost problem is that the number of modal components is required to be defined in advance. Another problem needs to be addressed is that VMD cannot effectively separate non-stationary signals composed of closely spaced or overlapped modes. As such, a new method named generalized adaptive variational modal decomposition (GAVMD) is proposed. In this new method, the number of component signals is adaptively estimated by an index of mean frequency, while the generalized demodulation algorithm is introduced to yield a generalized VMD that can decompose mode overlapped signals successfully. After that, synchrosqueezing wavelet transform (SWT) is applied to extract instantaneous frequencies (IFs) of the decomposed mono-component signals. To verify the validity and accuracy of the proposed method, three numerical examples and a steel cable with time-varying tension force are investigated. The results demonstrate that the proposed GAVMD method can decompose the multi-component signal with overlapped modes well and its combination with SWT enables a successful IF extraction of each individual component.

• The KIPS Transactions:PartA
• /
• v.9A no.3
• /
• pp.363-370
• /
• 2002

OPKFDD (Ordered Pseudo-Kronecker Functional Decision Diagram) is one of ordered-DDs (Decision Diagrams) in which each node can take one of three decomposition types : Shannon, positive Davio and negative Davio decompositions. Whereas OBDD (Ordered Binary Decision Diagram) uses only the Shannon decomposition in each node, OPKFDD uses the three decompositions and generates representations of functions with smaller number of nodes than other DDs. However, this leads to the extreme difficulty of getting an optimal solution for the minimization of OPKFDD. Since an appropriate decomposition type has to be chosen for each node, the size of the representation is decided by the selection of the decomposition type. We propose a heuristic method to generate OPKFDD efficiently from the OBDD of the given function and the algorithm of the decision of decomposition type for a given variable ordering. Experimental results demonstrate the performance of the algorithm.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.18 no.4
• /
• pp.1020-1041
• /
• 2024

With the development of covert communication technologies, the number of covert communication technologies using blockchain as a carrier is increasing. However, using the transaction amount of digital currency as a carrier for covert communication has problems such as low embedding rate, large consumption of transaction amount, and easy detection. In this paper, firstly, by experimentally analyzing the distribution of bitcoin transaction amounts, we determine the most suitable range of amounts for matrix decomposition. Secondly, we design a novel matrix decomposition method that can successfully decompose a large amount matrix into two small amount matrices and utilize the elements in the small amount matrices for covert communication. Finally, we analyze the feasibility of the novel matrix decomposition method in this scheme in detail from four aspects, and verify it by experimental comparison, which proves that our scheme not only improves the embedding rate and reduces the consumption of transaction amount, but also has a certain degree of resistance to detection.

• Nuclear Engineering and Technology
• /
• v.52 no.11
• /
• pp.2667-2677
• /
• 2020

A domain decomposition (DD) scheme for GPU-based Monte Carlo (MC) calculation which is essential for whole-core depletion is introduced within the framework of the modified history-based tracking algorithm. Since GPU-offloaded MC calculations suffer from limited memory capacity, employing DDMC is inevitable for the simulation of depleted cores which require large storage to save hundreds of newly generated isotopes. First, an automated domain decomposition algorithm named wheel clustering is devised such that each subdomain contains nearly the same number of fuel assemblies. Second, an innerouter iteration algorithm allowing overlapped computation and communication is introduced which enables boundary neutron transactions during the tracking of interior neutrons. Third, a bank update scheme which is to include the boundary sources in a way to be adequate to the peculiar data structures of the GPU-based neutron tracking algorithm is presented. The verification and demonstration of the DDMC method are done for 3D full-core problems: APR1400 fresh core and a mock-up depleted core. It is confirmed that the DDMC method performs comparably with the standard MC method, and that the domain decomposition scheme is essential to carry out full 3D MC depletion calculations with limited GPU memory capacities.

• Journal of Korean Society for Atmospheric Environment
• /
• v.21 no.4
• /
• pp.431-438
• /
• 2005

In order to apply the photocatalytic decomposition of aromatic VOCs, adsorbent prepared from MSWI fly ash was coated by $TiO_2$ solution to endow with photo-catalytic function. The effects of coating number, existence of light source and the type of $TiO_2$ solution used for coating were examined. Adsorbent coated with amorphous $TiO_2$ solution showed higher adsorptivity than adsorbent coated with crystal $TiO_2$ solution. Without light source, breakthrough curve of photo -catalyst absorbent for VOCs removal was similar to that of absorbent made from MSWI fly ash. On the other hand, breakthrough time was enlarged with light source and total removal efficiency of benzene and toluene was also increased. It can be explained as photo-decomposition effect of $TiO_2$ photo-catalyst. Total removal efficiency of benzene and toluene was increased according to the increase of coating number with light source. It was due to the effect of adsorption and photo reaction of photo-catalytic adsorbent. But total removal efficiency of benzene was lower than that of toluene. Because benzene was removed more effectively than toluene by adsorption, but photo - decomposition effect oi toluene was more high than benzene.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.7
• /
• pp.78-91
• /
• 1998

This paper presents modular design techniques of multiple-valued logic functions about the function decomposition method and input variable management method. The function decomposition method takes avantage of the property of the column multiplicity in a single-column variable partitioning. Due to the increased number of identical modules, we can achieve a simpler circuit design by using a single T-gate, which can eliminate some of the control functions in the module libraty types. The input variable management method is to reduce the complexity of the input variables by proposing the look up table which assign input variables to a code. In this case as the number of sub-functions increase the code-length and the size of the code-assignment table grow. We identify some situations where shard input variables among sub-functions can be further reduced by a simplicication technique. According to the result of adapting this method to a function, we have demonstrated the superiority of the proposed methods which is bing decreased to about 12% of interconnection and about 16% of T-gate numbers compare with th eexisting for th enon-symmetric and irregular function realization.

• Journal of the Institute of Convergence Signal Processing
• /
• v.2 no.2
• /
• pp.95-102
• /
• 2001

Fuzzy system is capable of uniformly approximating any nonlinear function over compact input space. The applications of fuzzy system, however, have been primarily limited by the need for large number of fuzzy rules, in particular, for the high-order nonlinear system. In this paper, we propose the reconstruction methods of fuzzy systems, parallel type and cascade, based on the decomposition of some classes of high-order nonlinear functions. Using the both types appropriately, we can reduce the number of fuzzy rules geometrically. It can be applied to the fuzzy system that has an online adaptive structure. Two examples of adaptive fuzzy sliding mode control are shown in the computer simulations to verify the validity of the proposed algorithm.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.423-425
• /
• 2001

The Proper Orthogonal Decomposition (POD) technique was applied to investigate the effects of Reynolds number and the characteristics of the organized motions or coherent structures as a function of downstream position from x/D=2 to 6 in a turbulent axisymmetric shear layer at Reynolds numbers of 78,400, 117,600, and 156,800. Data were collected simultaneously using the 138 hot-wire probe used by Citriniti and George (2000). The POD was then applied to a double Fourier transform in time and azimuthal direction of the double velocity correlation tensor. The lowest azimuthal mode for all POD modes, which dominated the dynamics at x=D = 3 in the previous experiments, dies off rapidly downstream. This is consistent with a trend toward homogeneity in the downstream evolution, and suggests that some residual value may control the growth rate of the far jet. On the other hand, for the higher azimuthal modes, the peak shifts to lower mode numbers and actually increases with downstream distance. These mixing layer data, normalized by similarity variables for the mixing layer, collapse at all downstream positions and are nearly independent of Reynolds numbers.