• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.4
• /
• pp.431-441
• /
• 1998

Polyester microfiber fabrics were decomposed at 100, 110, 120 and 140 t of temperature and 0.5, 1.0 and 1.5% of sodium propyleneglycolate/propyleneglycol solution(SPG-PG). Characteristic decomposition feature and physical and chemical properties of the decom- posed PET microfiber fabrics were discussed. The activation energy was 18.77 kcal/mol and the dyeability of the decomposed PET microfiber fabrics was found to be improved as it was supported by the examined K/S values. Up to the 20% of the weight loss of the PET microfiber fabrics, K/S values incresed with increasing the weight loss. The melting temperature of PET microfiber fabrics decomposed by SPG-PG showed no fundamental change. Tensile strength of the decomposed PET microfiber fabrics decreased linearly in accordance with the increased the weight loss of the PET microfiber fabrics. The moisture regain and the tactilities increased in accordance with the increased the weight loss of the PET microfiber fabrics.

• Carbon letters
• /
• v.3 no.4
• /
• pp.205-209
• /
• 2002

In the reaction of gas-solid phases, the microwave energy plays a role as a catalyst, because it causes friction between adjacent molecules and enables an unique characteristics of interior heating of the materials. When the dipole gases are adsorbed inside of the pore of carbon materials, the gases are decomposed by the microwave energy and reacted with the carbon atoms. Using this principle, we could make the activated carbon from coconut shell within 20 minute, and this residence time for activation is about 1/16 of rotary kiln. The BET surface area of activated carbon made by microwave is about $1,100m^2/g$ similar to conventional method of rotary kiln. In this study, the power of microwave generator was 400~1000W, and the gas for activation was steam mainly.

• Journal of Environmental Science International
• /
• v.22 no.3
• /
• pp.331-339
• /
• 2013

Efforts were made to determine the activation energy and the reaction order by adopting Kissinger and Flynn-Wall-Ozawa analysis methods. All the data were acquired from TGA thermograms for the mixed fuels with different temperature heating rates. It could be known that both the coal and the mixed fuels decomposed thermally at temperature ranges of $300{\sim}700^{\circ}C$. The temperature at the maximum reaction rate, Tp, could be determined by DTG method, which could be obtained by differentiation of TGA thermogram. Kissinger analysis showed the linear relationship with experimental data, showing the activation energy of $319.64{\pm}4$ kJ/mol. From Flynn-Wall-Ozawa analysis, it was shown that the activation energies and the reaction orders did not undergo any significant changes with both the conversions and the heating rates. It was considered from this facts that the combustion mechanism of the mixed fuels could not be affected by the extent of conversion and heating rate. In the present study, the activation energies showed different values according to the different analysis methods. The difference might be originated from the inconsistency of the mathematical data treatment method. In other words, while the activation energies obtained from the Kissinger method indicated the average values for overall reaction, that from Flynn-Wall-Ozawa method showed the average values for the each conversion around Tp.

• Textile Coloration and Finishing
• /
• v.2 no.3
• /
• pp.26-35
• /
• 1990

This study was carried out with the view of fundamental investigating to improve the tactile and the hygroscopicity of Poly(ethylene Terephthalate) (PET)fibers. Mono-sodium ethylene glycolate in ethylene glycol (MSEG-EG) solution was prepared and PET films were treated with it. The following conclusions were obtained. When PET films were decomposed in MSEG-EG solution, decomposition rate constant showed an exponential relationship with treating temperature; activition energy was 23.30 Kcal/mol, activation enthalpy was 22.52~22.60 Kcal/mol and activation entropy was -29.20~ -29.41 e.u. On the basis of the results obtained above and structure identification of decomposition products, it was found that the decomposition reaction proceeded through ester interchange reaction.

• Proceedings of the KAIS Fall Conference
• /
• 2004.11a
• /
• pp.255-258
• /
• 2004

Hydrazine is a weak base and strong reducing agent in the aqueous solution and is primarily utilized as a high-energy rocket propellant and an oxygen scavenger in boiler or feedwater. The objective of this study was to investigate the physicochemical properties and reactions of hydrazine and the catalytic and thermal decomposition by the temperature change. Hydrazine was fast decomposed with the catalyst of lower activation energy and at the higher temperature.

• Polymer(Korea)
• /
• v.26 no.4
• /
• pp.501-507
• /
• 2002

In this work, diglycidylether of bisphenol-S (DGEBS) epoxy resin was prepared by alkaline condensation of bisphenol-S (BPS) with epichlorohydrin (ECH) in the presence of NaOH catalyst. The structure of the synthesized DGEBS epoxy resin was confirmed by IR, NMR spectra, and elemental analysis. The curing reaction and glass transition temperature ($T_g$) of DGEBS epoxy resin cured with phthalic anhydride (PA) and tetrahydrophthalic anhydride (THPA) at curing agents were studied by dynamic differential scanning calorimetry (DSC). The thermal stability of the cured specimen was investigated by thermogravimetric analysis (TGA). As a result, the activation energy ($E_a$) of DGEBS/PA system was higher than that of DGEBS/THPA system, whereas $T_g$, initial decomposed temperature (IDT), and decomposition activation energy ($E_t$) of DGEBS/PA were lower than those of DGEBS/THPA. This was probably due to the fact that the crosslinking density of DGEBS/THPA was increased by ring strain of curing agent.

• Journal of the Korean Institute of Gas
• /
• v.26 no.5
• /
• pp.41-48
• /
• 2022

2-Chloro-N-(Cyano-2-thienyl methyl) acetamide (CCTA) is an intermediate used for synthesizing pesticides. It is stable at room temperature and pressure but can be decomposed when heat is accumulated. In this study, the decomposition characteristics were evaluated by measuring the weight change according to temperature using a Thermogravimetry analyzer(TGA), and the thermal decomposition characteristics were evaluated using Differential Scanning Calorimeter(DSC). The exothermic decomposition reaction occurred rapidly at about 91 ℃, and the activation energy determined by using Kissinger method, Kissinger-Akahira-Sunose(KAS) method, and Flynn-Wall-Ozawa(FWO) method were 162 kJ/mol, 149 kJ/mol and 139 kJ/mol, respectively. T_D24, the temperature at which the maximum heating rate is reached within 24 hours, was evaluated as 52~55 ℃ using the estimated activation energy.

• Journal of the Korean Applied Science and Technology
• /
• v.15 no.4
• /
• pp.79-85
• /
• 1998

$Cu_xFe_{3-x}O_4$ catalyst and $Zn_xFe_{3-x}O_4$ catalyst were synthesized by the air oxidation method with various C(II) and Zn(II) weights. Activated catalysts decomposed carbon dioxide to carbon at $350^{\circ}C$, $380^{\circ}C$, $410^{\circ}C$ and $440^{\circ}C$. The value of carbon dioxide decomposition rate for $Cu_{0.003}Fe_{2.997}O_4$ and $Zn_{0.003}Fe_{2.997}O_4$ catslysts than was better catalysts. The decomposed rate of the catalysts is about 85%${\sim}$90%. The reaction rate constant(4.00 $psi^{1-{\alpha}}/min$) and activation energy(2.62 kcal/mole) of $Cu_{0.003}Fe_{2.997}O_4$ catalyst are better than $Zn_{0.003}Fe_{2.997}O_4$

• Journal of the Korean Society of Safety
• /
• v.21 no.6 s.78
• /
• pp.38-45
• /
• 2006

Polymeric floorings mainly consisted of PVC are easily decomposed by many kinds of hot environmental factors, then generate hazardous asphyxiate gases and/or toxic gases etc. Therefore the mechanism of decomposition and quantitative toxic indices of products are very important for preventing safety and health disasters, especially in case of confined area. So we have investigated decomposition kinetics, numbers of process involved, toxicity indices of product and so on, using DSC, TGA, FT-IR and Pyrolyzer-GC/MS. The thermal decomposition process of polymeric floorings can be mainly divided by dehydrochlorinated reaction and polyene decomposition step, and activation energies of those are approximately $53.93{\sim}62.42kcal/mol$. Especially lethal concentration($LC_{50}$), fractional effective dose (FED) are calculated by measuring the amount of decomposition product. The values on $LC_{50}$ of sample G are ranged $2,003{\sim}2,019(mg/m^{3})$ in case of sample K and H are $1,877,\;1,998(g/m^{3})$ respectively. Even if the results are estimated by calculation method without animal test and/or clinical demonstration, these values could be very useful data for occupational health, hygiene and safety control.

• Elastomers and Composites
• /
• v.23 no.4
• /
• pp.289-298
• /
• 1988

The thermal degradation of poly(methyl methacrylate)(PMMA) and poly($\alpha$-methylstyrene-co-acrylonitrile)(SAN) mixtures were carried out using the thermogravimetry(TG) and differential scanning calorimetry(DSC) in the stream of nitrogen and air with 50 ml/min at the various heating rate from 4 to $20^{\circ}C/min$ and temperature from 20 to $500^{\circ}C$. The value of activation energies of thermal degradation determined by TG and DSC in the various PMMA/SAN mixtures were 34-54 kcal/mol in the stream of nitrogen. The value of activation energy of SAN 60% mixture were appeared high in comparison with addition rule. PMMA/SAN mixtures by the analysis of infrared spectrophotometer were decomposed by main chain scission in the stream of nitrogen.