• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.7C
• /
• pp.635-643
• /
• 2007

In this paper, a decision-directed expectation maximization (DEM) algorithm is proposed to improve the performance of channel estimation in OFDM-based cellular systems. The DEM algorithm enables a mobile station (MS) with multiple antennas, located at the cell boundary, to increase the performance of channel estimation using transmit data, without decreasing spectral efficiency. Also, DEM algorithm can apply fast fading without loss of channel estimation performance because that includes channel variation factor in a group. It is verified by computer simulation that the DEM algorithm can reduce computational complexity significantly while improving the performance of channel estimation in fast fading channels, compared with the expectation maximization (EM) algorithm.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.1
• /
• pp.27-32
• /
• 2016

In this paper, we proposed a soft decision-directed channel estimation based on MMSE estimation for MIMO-OFDM system. While the conventional method employs only pilot signals for channel estimation, the proposed algorithm performs channel estimation using pilot and reliable data signals. We also proposed selection criterion among reliable data signal for channel estimation. From numerical simulations, we show that the proposed channel estimator achieves 1 dB performance gain over conventional channel estimators.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.4
• /
• pp.83-89
• /
• 2013

An adaptive blind equalization is a technique using to minimize the Inter-symbol Interference occurred on a communication channel in the transmission of the high speed digital data. In this paper, we propose a blind equalization more improving performance of the conventional MSAGF-MMA adaptive blind equalization algorithm by applying a multiple step size. This algorithm apply a LMS algorithm with a several step size according to each region divided by absolute values of decision-directed error to MSAGF-MMA. By computer simulation, it is confirmed that the proposed algorithm has a performance highly enhanced in terms of a convergence speed, a residual ISI and a residual error and an ensemble averaged MSE in a steady status compared with MMA and MSAGF-MMA.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.402-404
• /
• 2013

The wireless communication channel different speed by depth of water or salt and it is influenced by multi-path according underwater. In the paper, MIMO(Multi-input-Multi-Output) system used turbo Equalizer combining Equalizer with Turbo codes for data rates by multi-path channel. we proposed and simulated that the Decision-Directed method used for phase offset. The simulation of proposed method show that the bit-error rate performance can be severely affected by phase errors.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.12
• /
• pp.77-84
• /
• 2005

The orthogonal frequency division multiplexing (OFDM) technique and the single carrier with cyclic prefix (SC-CP) scheme are very attractive solutions for wireless applications, being computationally efficient since equalization is performed in the frequency domain. The equalizer could not entirely handle significant mean. Doppler shift. This motivates the use of a phase error tracking loop that operates jointly with the frequency equalizer. This paper describes the effect of the mean phase error and the performance of the proportional equalizer coupled with a phase error tracking loop based on decision-directed method. Furthermore, simulation results show that we can reduce the computational toad of the tracking loop with minimal performance degradation.

• Journal of Navigation and Port Research
• /
• v.36 no.8
• /
• pp.631-635
• /
• 2012

Underwater acoustic communication has multipath error because of reflection by sea-level and sea-bottom. The multipath of underwater channel causes signal distortion and error floor. In this paper, in order to design an efficient packet structure, we employ channel coding scheme and phase recovery algorithm. For channel coding scheme, half rate LDPC channel coding scheme with N=1944 and K=972 was used. Also, decision directed phase recovery was used for correcting phase offset induced by multipath. Based on these algorithms, we propose length of data for optimal packet structure in the environment of oceanic experimentation.

• The Journal of the Acoustical Society of Korea
• /
• v.26 no.6
• /
• pp.227-234
• /
• 2007

This paper describes a transmission method based on a single carrier with frequency domain equalization (SC-FDE) scheme with cyclic prefix(CP). The SC-FDE has similar features with orthogonal frequency division multiplexing(OFDM). Similar to OFDM, a SC-FDE system is computationally efficient since equalization is reformed on a block of data in the frequency domain. Especially, it has the advantage of low sensitivity to nonlinear distortion compared to OFDM. In this paper, we design a SC-FDE receiver using decision-directed method, and present simulation results.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.4
• /
• pp.11-17
• /
• 2001

In this paper, we propose a polarity decision carrier recovery algorithm for high order QAM(Quadrature Amplitude Modulation), which has robust and large frequency acquisition performance in the high order QAM modem. The proposed polarity decision PD(Phase Detector) output and its variance characteristic are mathematically derived and the simulation results are compared with conventional DD(Decision-Directed) method. While the conventional DD algorithm has linear range of $3.5^{\circ}{\sim}3.5^{\circ}$, the proposed polarity decision PD algorithm has linear range as large as $-36^{\circ}{\sim}36^{\circ}$ at ${\gamma}-17.9$. The conventional DD algorithm can only acquire offsets less than ${\pm}10\;KHz$ in the case of the 256 QAM while an analog front-end circuit generally can reduce the carrier-frequency offset down to only ${\pm}100\;KHz$. Thus, in this case additional AFC or phase detection circuit for carrier recovery is required. But by adopting the proposed polarity decision algorithm, we can find the system can acquire up to ${\pm}300\;KHz$at SNR = 30dB without aided circuit.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.3
• /
• pp.77-82
• /
• 2018

This paper is concerned with the performance analysis of a modified stop-and-go generalized multi-modulus algorithm (MSAG-GMMA) adaptive blind equalization algorithm with variable step size. The proposed algorithm multiplies the fixed step size by the error signal of the decision-oriented algorithm in the equalization coefficient update equation, and changes the step size according to the error size. Also, the MSAG-GMMA having a fixed step size is operated so as to maintain a fast convergence speed from a certain threshold to a steady state by determining the error signal size of the decision-directed algorithm, and when the MSAG-GMMA to work To evaluate the performance of the proposed algorithm, we use the ensemble ISI, ensemble-averaged MSE, and equalized constellation obtained from the output of the equalizer as the performance index. Simulation results show that the proposed algorithm has faster convergence speeds than MMA, GMMA, and MSAG-GMMA and has a small residual error in steady state.

• Archives of design research
• /
• v.9
• /
• pp.801-810
• /
• 1994

Design Problems are often both multidimensional and highly interactive. Very rarely does any part of a designed thing serve only one purpose. The activity of designing is thus a goal-directed activity and normally a goal-directed problem-solving activity. This means, problem solving is finding a way to get from some initial situation to a desired goal. Designers are transforming agents within a society whose goals are to improve the human condition through physical metamorphosis. Many theorist have agreed that designing involves problem solving or decision making. Accordingly evaluation plays an essential role in design activity. The evaluation factors include all attributes that have levels specified by quantitative and qualitative objectives Alternatives in multi-objective decision prOblems generally possess numerous attributes by which they can be described and compared. The evaluation factors include all attributes that have levels specified by quantitative and qualitative objectives. However since qualitative factors are difficult to quantify as numeral estimates, these factors have tended to be ignored without regard for their importance to human content. We adapted the Accumulative Evaluation Model as an evaluation algorithm for IDES. Industrial Design Evaluation System (IDES) consists of 3 major modules ( 1 Design Element, 2.Matrix, 3.Evaluation). It is intended to be an aid for design evaluation. The luther thinks IDES is a new design evaluation approach which could provide effective rating of design values to make value judgements. It is an attempt to provide industrial designers with access to design evaluation. The author's aim is to produce an Object-Oriented Evaluation System which can guide the designers and decision makers under complex design projects. It uses\ulcorner an Object-Oriented Programming for this prototype, Because of managing complexity (Flexibility and Reusability) and improving productivity(Extensibility & Maintainability and Programming by User) in software development process. The author has chose the C++ because it is a hybrid, rather than pure Object-Oriented Language.