• Journal of Wetlands Research
• /
• v.7 no.4
• /
• pp.33-42
• /
• 2005

Wetlands often function as a nutrient sink. It is well known that increased input of nutrient increases the primary productivity but it is not well understood what is the fate of produced biomass in wetland ecosystem. Water and sediment quality, decomposition rate of cellulose, and sediment accumulation rate in 11 montane marshes in northern Sierra Nevada, California were analyzed to trace the effect of nitrogen and phosphorus content in water on nutrient dynamics. Concentrations of ammonium, nitrate, soluble reactive phosphorus (SRP) in water were in the range of 27 to 607, 8 to 73, and 6 to 109 ppb, respectively. Concentrations of ammonium, calcium, magnesium, sodium, and potassium in water were the highest in Markleeville, which has been impacted by animal farming. Nitrate and SRP concentrations in water were the highest in Snow Creek, which has been impacted by human residence and a golf course. Cellulose decomposition rates ranged from 4 to 75 % per 90 days and the highest values were measured in Snow Creek. Concentrations of total carbon, nitrogen, and phosphorus in sediment ranged from 8.0 to 42.8, 0.5 to 3.0, and 0.076 to 0.162 %, respectively. Accumulation rates of carbon, nitrogen, and phosphorus fluctuated between 32.7 to 97.1, 2.4 to 9.0, and 0.08 to $1.14gm^{-2}yr{-1}$, respectively. Accumulation rates of carbon and nitrogen were highest in Markleeville and that of phosphorus was highest in Lake Van Norden. Correlation analysis showed that decay rate is correlated with ammonium, nitrate, and SRP in water. There was no correlation between element content in sediment and water quality. Nitrogen accumulation rate was correlated with ammonium in water. These results showed that element accumulation rates in montane wetland ecosystems are determined by decomposition rate rather than nutrient input. This study stresses a need for eco-physiological researches on the response of microbial community to increased nutrient input and environmental change because the microbial community is responsible for the decomposition process.

• Explosives and Blasting
• /
• v.29 no.1
• /
• pp.34-40
• /
• 2011

In this study, effects that thermal stress and water pressure have on the deformation behaviour of granite specimens recovered in Gagok Mine are estimated. To analyze effects of the thermal stress and water pressure on the deformation behaviour, granite specimens were preheated with cycles of predetermined temperatures ranging $200^{\circ}C$ to $700^{\circ}C$ and 500, 600, $700^{\circ}C$ specimens were pressurized to 7.5 MPa. The deformation behaviour of the specimens had been studied by performing uniaxial compressive tests. Axial and lateral strains of specimens were found to increase with increasing temperature, and above $600^{\circ}C$, the increase of strains were more pronounced. The reduction trends of uniaxial compressive strength and Young's modulus with temperature appeared to follow an exponential decay function. Specimens under water pressure showed the more inelastic deformation characteristics, which means that water pressure has an effect on the widening and extending of micro-cracks existed in preheated specimens.

• Journal of Photoscience
• /
• v.4 no.2
• /
• pp.41-48
• /
• 1997

The plasma membrane and microsomes, isolated from the cells treated with hematoporphyrm derivative (HpD) for 1 and 24 h, accumulated the aggregated porphyrin. The quantity of aggregated porphyrin was same in the plasma membrane and microsomes after isolating them from cells treated with HpD for 1 h whereas the microsomes accumulated higher quantity of aggregated porphyrin when cells were treated with HpD for 24 h. Photodynamic action of aggregated porphyrin on plasma membrane and microsomes was investigated using lipid specific fluorescent probes: 1,6-diphenyl-1,3,5-hexatrine (DPH) and 1-(4-trimethylammonium), 6-diphenyl-1,3,5-hexatrine(TMA-DPH). The time dependent anisotropy of these probes in the membranes was measured and the decay of anisotropy was analyzed using wobbling in cone model. Upon irradiation both the plasma membrane and the microsomes showed an increase in the limiting anis~)tropy and order parameter and a decrease in the cone angle of the lipid probes. The increase in the limiting anisotropy was pronounced in membranes isolated from the cells treated with HpD for 24 h. Photoinduced change in the limiting anisotropy was dependent on the duration of incubation of cells with HpD before isolating the membranes. In both the membranes. the membrane core was affected more as compared to the outer leaflet. In addition to the structural changes, a decrease in Na$^+$-K$^+$-ATPase and NADPH cyt c reductase activity was also observed upon irradiation of HpD treated cells. Inhibition in NADPH cyt c reductase was more when cells were treated with HpD for 24 h, however, Na$^+$-K$^+$-ATPase activity did not depend on the duration of the treatment of cells with HpD before irradiation. Our results suggest that the extent of photoinduced perturbations in the membranes varies as a function of duration of the treatment of cells with HpD and the membrane core is more susceptible to the photodynamic action of aggregated porphyrin.

• Analytical Science and Technology
• /
• v.15 no.3
• /
• pp.229-235
• /
• 2002

Plasma source ion implantation (PSII) technique was utilized to improve the wettability of polystyrene surfaces. It is well known that treated surfaces undergo aging, leading to hydrophobic recovery with time. We investigated the aging effect of polystyrene thin film on the various molecular weights. Polystyrenes with several molecular weights ($M_w$ = 760, 2430, 31600, 115700, 280000, 903600) were treated in different experimental conditions including gas species and pulse energy, and their hydrophilicity was measured by contact angle goniometer. To study wettability decay as a function of the molecular weight, PSII-treated samples were aged at different temperatures. Hydrophobic recovery of high molecular weight polystyrene was much slower than that of low molecular weight, even at high temperatures. The methods used to characterize treated surfaces were water contact angle measurement, TOF-SIMS, XPS, SEM and AFM.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.469-470
• /
• 2008

We have studied electro-optic characteristics as a function of splay elastic constants ($K_{11}$) in the fringe-field switching (FFS) mode using the LC with positive dielectric anisotropy. When $K_{11}$ is increased from 7.7pN to 11.7pN, a maximum transmittance is slightly increased and rising time become a little bit fast. However, operating voltage and threshold voltage is independent. In opposition to rising time, decay time is not affected by $K_{11}$. We already know that $K_{11}$ affects tilt angle of liquid crystals. Therefore, on the occasion of high $K_{11}$, liquid crystals are mainly affected by twist deformation because the higher $K_{11}$, the less tilt angle. In the FFS device, high $K_{11}$ is favorable to reduce tilt angle in on state and thus improve rising response time.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.5
• /
• pp.27-36
• /
• 2013

Linear stability analysis for combustion instability within a cylindrical port of solid rocket motor has been conducted. The analysis of acoustic energy has been performed by a commercial COMSOL code to obtain the mode function associated to each acoustic mode prior to the calculation of stability alpha. An instability diagnosis based on the linear stability analysis of Culick is performed where special interests have been focused on 5 stability factors(alpha) such as pressure coupling, nozzle damping, particle damping and additionally, flow turning effect and viscous damping to take into account the flow and viscosity effect near the fuel surface. The instability decay characteristics depending on the particle size is also analyzed.

• Nuclear Engineering and Technology
• /
• v.21 no.1
• /
• pp.1-11
• /
• 1989

Numerous losses of decay heat removal capability have occurred at U during stutodwn while its significance to safety is needless to say. A study is carried out as an attempt to assess what could be done to lower the frequency of these events and to mitigate their consequences in the unlikely event that one occurs. The shutdown risk model is developed and analyzed using Event/Fault Tree for the typical pressurized water reactor. The human cognitive reliability (HCR) model, two-stage bayesian approach and staircase function model are used to estimate human reliability, initiating event frequency and offsite power non-recovery probability given loss of offsite power, respectively. The results of this study indicate that the risk of a Pm at shutdown is not much lower than the risk when the plant is operating. By examining the dominant accident sequences obtained, several design deficiencies are identified and it is found that some proposed changes lead to significant reduction in core damage frequency due to loss of cooling events.

• Ocean Systems Engineering
• /
• v.5 no.3
• /
• pp.139-160
• /
• 2015

The global performance of the 5MW OC4 semisubmersible floating wind turbine in random waves was numerically simulated by using the turbine-floater-mooring fully coupled and time-domain dynamic analysis program FAST-CHARM3D. There have been many papers regarding floating offshore wind turbines but the effects of second-order wave-body interactions on their global performance have rarely been studied. The second-order wave forces are actually small compared to the first-order wave forces, but its effect cannot be ignored when the natural frequencies of a floating system are outside the wave-frequency range. In the case of semi-submersible platform, second-order difference-frequency wave-diffraction forces and moments become important since surge/sway and pitch/roll natural frequencies are lower than those of typical incident waves. The computational effort related to the full second-order diffraction calculation is typically very heavy, so in many cases, the simplified approach called Newman's approximation or first-order-wave-force-only are used. However, it needs to be justified against more complete solutions with full QTF (quadratic transfer function), which is a main subject of the present study. The numerically simulated results for the 5MW OC4 semisubmersible floating wind turbine by FAST-CHARM3D are also extensively compared with the DeepCWind model test results by Technip/NREL/UMaine. The predicted motions and mooring tensions for two white-noise input-wave spectra agree well against the measure values. In this paper, the numerical static-offset and free-decay tests are also conducted to verify the system stiffness, damping, and natural frequencies against the experimental results. They also agree well to verify that the dynamic system modeling is correct to the details. The performance of the simplified approaches instead of using the full QTF are also tested.

• Nuclear Engineering and Technology
• /
• v.54 no.1
• /
• pp.269-274
• /
• 2022

An artificial neural network (ANN) that identifies radionuclides from low-count gamma spectra of a NaI scintillator is proposed. The ANN was trained and tested using simulated spectra. 14 target nuclides were considered corresponding to the requisite radionuclide library of a radionuclide identification device mentioned in IEC 62327-2017. The network shows an average identification accuracy of 98.63% on the validation dataset, with the gross counts in each spectrum N_c = 100~10000 and the signal to noise ratio SNR = 0.05-1. Most of the false predictions come from nuclides with low branching ratio and/or similar decay energies. If the N_c>1000 and SNR>0.3, which is defined as the minimum identifiable condition, the averaged identification accuracy is 99.87%. Even when the source and the detector are covered with lead bricks and the response function of the detector thus varies, the ANN which was trained using non-shielding spectra still shows high accuracy as long as the minimum identifiable condition is satisfied. Among all the considered nuclides, only the identification accuracy of ²³⁵U is seriously affected by the shielding. Identification of other nuclides shows high accuracy even the shielding condition is changed, which indicates that the ANN has good generalization performance.

• The Korea Journal of Herbology
• /
• v.24 no.3
• /
• pp.139-146
• /
• 2009

Objectives : This study was conducted to investigate the effect of HTE001, a multi-herbal mixture consisting of 10 herbs, Cornus Frutus, Schizandrae Fructus, Rubi Fructus, Cnidi Fructus, Acanthopanacis senticosi Radix, Cinnamomi Cortex, Eucommiae Cortex, Allii Bulbus, Rehmanniae Radix and Ginseng Radix, on electrostimulation-induced penile erection in rats. Methods : Intracavernous pressure (ICP) and mean arterial blood pressure (MAP) were simultaneously monitored through electric stimulation of the cavernous nerve after the oral administration of HTE001 (30, 100, 300 mg/kg) in normal rats. Statistical analysis was performed on maximal intracavernous pressure (ICP), maximal intracavernous pressure/mean arterial blood pressure (ICP/MAP) ratio, and the area under the curve (AUC) of ICP/MAP ratio. Results : Oral administration of HTE001 300 mg/kg caused the ICP to increase in a frequency-dependent manner. And HTE001 300 mg/kg treatment group showed the highest value in the ICP/MAP ratio and the AUC value of the ICP/MAP ratio compared to the control group at 2 Hz, 6 Hz and 10 Hz, respectively without an effect on the mean arterial blood pressure under the same stimulation of the cavernous nerve. Conclusions : These results show that HTE001 improve penile erection and prolong the decay period in normal rats without affecting mean arterial blood pressure, and suggest that HTE001 could be a good therapeutic candidate to treat erectile dysfunction.