• Journal of the Korean Society of Safety
• /
• v.30 no.3
• /
• pp.52-58
• /
• 2015

As sudden rainfall has happened, the debris flow has occurred in the mountain area. Recently sudden rainfall occurred so frequently caused by abnormal climate. Thus debris flow hazard had consecutively increased damage because of debris flow. Recently, Enormous damage due to debris flow have occurred in Korea. Various studies have been conducted to prevent search debris flow hazard. This study was carried out for debris flow behavior according to the land slope on propagation. It is the important one among factors that are related to the propagation over the city with respect to debris flow discharge and depth. For the numerical simulations in this study, the land slope was varied of 5, 0, $-5^{\circ}$ to investigate the debris flow behavior with the FLO-2D, often recommended by FEMA to simulate debris flow. To verify the performance of FLO-2D, comparison with the USGS experiments (Iverson et al, 2010) was conducted. From numerical results the propagation length of the debris flow was found the most sensitive one. Maximum of debris flow thickness and velocity and structural vulnerabilities were investigated to the effect of land slope. They was became smaller according to land slope of 5, -5, $0^{\circ}$ in the order. As a result, debris flow behavior analysis about the effect of the land slope could contribute to understand the vulnerability of city for debris flow hazards.

• Journal of the Korean Society of Safety
• /
• v.31 no.2
• /
• pp.49-56
• /
• 2016

In Korea, there exist many mountains, and sudden storms occur during the summer season. When severe rainstorm events occur in steep slope topography, risk of debris flow is increased. Once debris flow occurs in urban area, it may cause casualties and physical damages due to rapid debris flow velocity along a steep slope. Accordingly, preventing method of sediment-related disaster for demage mitigation are essential. Recently, various studies on debris flow have been conducted. However, the prediction of the physical propagation of debris flow along the steep slope was not thoroughly investigated. Debris flow is characterized by various factors such as topography, properties of debris flow, amount of debris flow. In the study the numerical simulation was focused on the topographic factor. Fundamental analysis of the risk area was implemented with emphasis on the propagation length, thickness, and the development of maximum velocity. The proposed results and the methodology of estimating the structural vulnerability would be helpful in predicting the behavior and the risk assessment of debris flow in urban area. These results will be able to estimate the vulnerability of urban areas affected the most damage by debris flow.

• Journal of the Korean Geographical Society
• /
• v.28 no.2
• /
• pp.77-98
• /
• 1993

The intent of this study is to analyze the characteristics of distribution, patter, and deposits of the exposed debris slope landform by aerial photography interpretation, measure-ment on the topographical maps and field surveys in the southern part Taebaek mountains. It also aims to research the arrangement types of mountain slope and the landform development of debris slopes in this area. In conclusion, main observations can be summed up as follows. 1. The distribution characteristics 1)From the viewpoint of bedrocks, the distribution density of talus is high in case of the bedrock with high density of joints, sheeting structures and hard rocks, but that of the block stream is high in case of intrusive rocks with the talus line. 2)From the viewpoint of bedrocks, the distribution density of talus is high in case of the bedrock with high density of joints, sheeting structures and hard rocks, but that of the block stream is high in case of inrtusive rocks with the talus line. 2) From the viewpoint of distribution altitude, talus is mainly distributed in the 301~500 meters part above the sea level, while the block stream is distributed in the 101~300 meters part. 3) From the viewpoint of slope oriention, the distribution density of talus on the slope facing the south(S, SE, SW) is a little higher than that of talus on the slope facing the north(N, NE, NW). 2. The Pattern Characteristics 1) The tongue-shaped type among the four types is the most in number. 2) The average length of talus slope is 99 meters, especially that of talus composed of hornfels or granodiorite is longer. Foth the former is easy to make free face; the latter is easdy to produce round stones. The average length of block stream slope is 145 meters, the longest of all is one km(granodiorite). 3) The gradient of talus slope is 20~45${^\circ}$, most of them 26-30${^\croc}$; but talus composed of intrusive rocks is gentle. 4) The slope pattern of talus shows concave slope, which means readjustment of constituent debris. Some of the block stream slope patterns show concave slope at the upper slope and the lower slope, but convex slope at the middle slope; others have uneven slope. 3. The deposit characteristics 1) The average length of constituent debris is 48~172 centimeters in diameter, the sorting of debris is not bad without matrix. That of block stream is longer than that of talus; this difference of debris average diameter is funda-mentally caused by joint space of bedrocks. 2) The shape of constituent debris in talus is mainly angular, but that of the debris composed of intrusive rocks is sub-angular. The shape of constituent debris in block stream is mainly sub-roundl. 3) IN case dof talus, debris diameter is generally increasing with downward slope, but some of them are disordered and the debris diameter of the sides are larger than that of the middle part on a landform surface. In block stream, debris diameter variation is perpendicularly disordered, and the debris diameter of the middle part is generally larger than that of the sides on a landform surface. 4)The long axis orientation of debris is a not bad at the lower part of the slope in talus (only 2 of 6 talus). In block stream(2 of 3), one is good in sorting; another is not bad. The researcher thinks that the latter was caused by the collapse of constituent debris. 5) Most debris were weathered and some are secondly weathered in situ, but talus composed of fresh debris is developing. 4. The landform development of debris slopes and the arrangement types of the mountain slope 1) The formation and development period of talus is divided into two periods. The first period is formation period of talus9the last glacial period), the second period is adjustment period(postglacial age). And that of block stream is divided into three periods: the first period is production period of blocks(tertiary, interglacial period), the second formation period of block stream(the last glacial period), and the third adjustment period of block stream(postglacialage). 2) The arrangement types of mountain slope are divided into six types in this research area, which are as follows. Type I; high level convex slope-free face-talus-block stream-alluvial surface Type II: high level convex slope-free face-talus-alluvial surface Type III: free face-talus-block stream-all-uvial surface Type IV: free face-talus-alluval surface Type V: talus-alluval surface Type VI: block stream-alluvial surface Particularly, type IV id\s basic type of all; others are modified ones.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.13 no.4
• /
• pp.52-64
• /
• 2010

This study was carried out to analyze the occurrence characteristics and the influence of forest environment factors on the debris flow of 3 national parks in korea. The results obtained from this study were summarized as follows; The total number of debris flow occurrence was 125 areas. The average length of the debris flow scar was 144m, average width was 20m. And the average area and sediment were $2,854m^2$ and $3,959m^3$ respectively. The factors influencing the debris flow were highly occurred in Metamorphic rock, mixed forest type. And also, slope gradient was $30{\sim}35^{\circ}$, aspect was NE, altitude was over 1,000m, vertical and cross slope was concave (凹), soil depth was below 15cm, stream order was 0 order. The variables of cross slope (complex), deciduous tree, soil depth (over 46cm), cross slope (concave), mixed forest type and altitude (801~1200m) in correlation analysis were significant at 1 % level. The landslide of high mountain area highly tend to change the debris flow in stream bed of torrent. The debris flow in national parks mainly occurred in high mountain area with long ridge and steep slope.

• Journal of the Korean Society of Safety
• /
• v.26 no.2
• /
• pp.83-88
• /
• 2011

Annually, many parts of the Korea have been damaged from the localized heavy rain and/or typhoons which peak between June and September, which result in extensive financial and human loss. Especially, because the most area of Gangwon province is composed of the steep slope mountains, the damages by the debris flow or land-sliding are more frequent and the frequency has been increased. To analyze the characteristics and causes of these debris flow disasters, lots of study are recently being conducted through database of weather, hydrologic, soil etc using a GIS or remote sensing. In this study, we applied GIS method to analyze the risk of the debris flow area. With the statistical analysis and infinite slope stability model(SINMAP), the debris flow risk level of the mountain slope was generated. As a result, the GIS statistical analysis showed high correlation that former model of SINMAP in determining the debris flow risk area.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.1294-1301
• /
• 2010

This study is an experimental research for the dispersion behavior and impact characteristics of debris flow according to change of slope. Large scale experimental setup for the debris flow was established to simulate the artificial rainfall and control the ground slope. Parameters such as materials of debris flow, slope, and length of slope were used for the experiments. After the experiments, it was found that the speed of ground material components was increased about 28~47%. It was found that speed can be increased by increasing the particle size. Furthermore, maximum/final loads for ground material components were increased 89% for the coarse aggregate and 68% for the fine aggregate comparing with sand.

• Journal of Industrial Technology
• /
• v.30 no.A
• /
• pp.95-101
• /
• 2010

This paper is results of case study on characteristics of debris flow occurred at Jecheon during a heavy rainfall in 2009. The site studied is the mountain area located at Palsong-ri Bongyang-op in Jecheon-si where serious damages due to debris flow were occurred by heavy rainfall during July 7 to July 16 in 2009. Intensity and duration of rainfall causing debris flow were analyzed on the basis of AWS data. Characteristics of debris flow such as initiation, transportation and deposition were investigated through field reconnaissance. The geological and topographical characteristics of slope where debris flow was triggered were figured out and characteristics of erosion on the bottom and sides of valley during transportation of debris flow were also investigated. The slope and boundary of valley where the debris flow started to be deposited were studied.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.2
• /
• pp.15-24
• /
• 2016

This study conducted an evaluation of the extent of debris flow damage using SINMAP, which is slope stability analysis software based on the infinite slope stability method, and FLO-2D, a hydraulic debris flow analysis program. Mt. Majeok located in Chuncheon city in the Gangwon province was selected as the study area to compare the study results with an actual 2011 case. The stability of the slope was evaluated using a DEM of $1{\times}1m$ resolution based on the LiDAR survey method, and the initiation points of the debris flow were estimated by analyzing the overlaps with the drainage network, based on watershed analysis. In addition, the study used measured data from the actual case in the simulation instead of existing empirical equations to obtain simulation results with high reliability. The simulation results for the impact of the debris flow showed a 2.2-29.6% difference from the measured data. The results suggest that the extent of damage can be effectively estimated if the parameter setting for the models and the debris flow initiation point estimation are based on measured data. It is expected that the evaluation method of this study can be used in the future as a useful hazard mapping technique among GIS-based risk mapping techniques.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.6
• /
• pp.59-66
• /
• 2012

The purpose of this study is to estimate the behavior and the mechanism of debris flow on the slope, which has specially various gradient plane. The numerical simulation was performed by using the Finite Differential Element method (FDM) based on the equation for the mass conservation and momentum conservation. The mechanism of flow type for debris flow is divided into three flow types which are stony debris flow, immature debris flow, and turbulent water flow, respectively. First, flow discharge, water flow depth, sediment volume concentration was investigated by variable input of flow discharge at the straight slope angle and two step inclined plane. As the input of flow discharge was decrease, flow discharge and water flow depth was increased, after the first coming debris flow only reached at the downstream. As the input of flow discharge was increased, the curve of flow discharge and flow depth was highly fluctuated. As the results of RMS ratio, the flow discharge and flow depth was lower two step slope angle than the straight slope angle. Second, the behavior of debris flow was investigated by the four cases of gradient degree at the downstream of slope angle. The band width of flow discharge and flow depth for $14^{\circ}$ between $16^{\circ}$ was higher than other gradient degree, and fluctuation curve was continuously high after 10 seconds.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.302-311
• /
• 2008

There have been repetitive landslides and debris flows on natural terrain induced by intensive rainfalls which have never been experienced during the last a few decades in Korea. Frequencies and magnitudes of landslides and debris flows are steeply increased after 2000 resulting in huge damages of human beings and facilities. According to a statistical data from NEMA, the human deaths induced by landslides and slope hazards occupies 22.3% of the total human deaths by all the natural hazards in Korea during the last 30 years. Among the human deaths by landslides and slope hazards, 85% of the damages were caused by landslides and debris flows on natural hazards. Therefore, this paper summarizes important events of landslides and debris flows, their characteristics, and suggests some methods of damage mitigation.