• Journal of Mechanical Science and Technology
• /
• v.15 no.12
• /
• pp.1711-1727
• /
• 2001

Heat transfer coefficient were measured and new correlations were developed for two-phase heat transfer in a horizontal pipe for different patterns. Flow patterns were observed in a transparent circular pipe (2.54 cm I. D. and L/D=96) using an air/water mixture. Visual identification of the flow patterns was supplemented with photographic data and the results were plotted on the flow regime map proposed by Taitel and Dukler and agreed quite well with each other. A two-phase heat transfer experimental setup was built for this study and a total of 150 two-phase heat transfer data with different flow patterns were obtained under a uniform wall heat flux boundary condition. For these data, the superficial Reynolds number ranged from 640 to 35,500 for the liquid and from 540 to 21,200 for the gas. Our previously developed robust two-phase heat transfer correlation for a vertical pipe with modified constants predicted the horizontal pipe air-water heat transfer experimental data with good accuracy. Overall the proposed correlations predicted the data with a mean deviation of 1.0% and an rms deviation of 12%.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.2B
• /
• pp.1-10
• /
• 2005

TCP/IP protocols have been implemented in software program running on CPU in end systems. As the increased demand of fast protocol processing, it is required to implement the protocols in hardware, and Host Interface is responsible for communication between external CPU and the hardware blocks of TCP/IP implementation. The Host Interface follows AMBA AHB specification for the communication with external world. For control flow, the Host Interface behaves as a slave of AMBA AHB. Using internal Command/status Registers, the Host Interface receives commands from CPU and transfers hardware status and header information to CPU. On the other hand, the Host Interface behaves as a master for data flow. Data flow has two directions, Receive Flow and Transmit Flow. In Receive Flow, using internal RxFIFO, the Host Interface reads data from UDP FIFO or TCP buffer and transfers data to external RAM for CPU to read. For Transmit Flow, the Host Interface reads data from external RAM and transfers data to UDP buffer or TCP buffer through internal TxFIFO. TCP/IP hardware blocks generate packets using the data and transmit. Buffer Descriptor is one of the Command/Status Registers, and the information stored in Buffer Descriptor is used for external RAM access. Several testcases are designed to verify TCP/IP functions. The Host Interface is synthesized using the 0.18 micron technology, and it results in 173 K gates including the Command/status Registers and internal FIFOs.

• Spatial Information Research
• /
• v.18 no.3
• /
• pp.41-52
• /
• 2010

This paper analyzed the interregional flow changes of software (SW) industries using a GIS Flow Map. Employment data for SW enterprise headquarters from 1999 until 2008 were constructed according to the Origin-Destination Matrix, and were mapped and analyzed using the Flow Mapper and ArcGIS Flow Data Model. From the result we can identify the decentralization of interregional flow in SW industries and recognize the possibilities of the larger SW enterprises' employment, the higher locational footlooseness. The GIS Flow Map was identified as useful tool for researching growth, decline and spatial movement of industrial clusters that experience business relocation. This method can be applied to understand and visualize urban spatial changes.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.921-927
• /
• 2001

Steady flow bench test is a practical, powerful and widely used test in most engine manufacturers to give a design concept of a new engine. In order to use steady data as a performance index, it is necessary to build some database, which can correlate the port characteristics with engine data. However, it is very hard to investigate all port and valve shapes with experimental tools. The steady flow scheme is relatively simple and its results are bulk ones such as flow rate and momentum of flow. Therefore a CFD code can be easily applied to the port evaluation. In this study, the steady flow test was simulated through two and three-dimensional analysis on intake port design for comparing with experimental data and confirming the feasibility of applying analytic method. For this purpose, the effect of valve curvature on flow rate was estimated by a CFD code. There results were compared with those of real steady flow tests. As a result, the 2-D analysis described the phenomena qualitatively well, and also the results of 3-D analysis were almost consistent with experimental data.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.42
• /
• pp.24-30
• /
• 2000

A system for evaluating streamflow data (KORSAS) was developed, and is operated using PC based Windows to help the hydrological observation practitioner's working in Korea Water Resources Corporation (KOWACO). This system has modules including; DB access and data management, flow measurement arranging, H-Q relation deriving, area rainfall calculating, flow calculating, and flow evaluating modules. Evaluation of observed streamflow is accomplished through the following processes. First, hourly streamflow data is calculated from water level data stored in a DB server by applying the rating relationship between water level and flow rates derived from the past flow measurements. Second, hourly areal rainfal data is calculated from point data stored in the DB server by applying Thiessen networks. Third, hydrographs are displayed on a daily, weekly, monthly, or seasonal duration basis, and are compared to hydrographs of reservoir inflow, hydrographs at water level observation stations and hydrographs derived from simulated results using models.

• Proceedings of the KIEE Conference
• /
• 1998.11b
• /
• pp.666-668
• /
• 1998

In this paper we illustrate the design of a node label data flow machine based on self-timed paradigm. Data flow machines differ from most other parallel architectures, they are based on the concept of the data-driven computation model instead of the program store computation model. Since the data-driven computation model provides the excution of instructions asynchronously, it is natural to implement a data flow machine using self timed circuits.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.8
• /
• pp.1033-1041
• /
• 2003

Two-phase flow pattern data during horizontal in-tube flow boiling are presented for pure and mixed refrigerants of R134a and Rl23, The flow pattern is observed through tubular sight glasses located at inlet and outlet of the test section, which is made of a stainless steel tube, 2m long with 10mm I.D., 1.5mm wall thickness. The obtained results are compared with the available various correlations for flow pattern. The flow pattern map of Hashizume was in good agreement with the present data except the region of low mass velocity. Weisman flow pattern map was also known to satisfactorily predict data for refrigerants in the region of annular flow. In this study, the flow pattern are simply classified into two groups; stratified(including intermittent, stratified and stratified-wavy) flow and annular flow. The transition quality from stratified to annular flow was obtained by modifying the liquid Froude number.

• Journal of Advanced Marine Engineering and Technology
• /
• v.27 no.4
• /
• pp.487-493
• /
• 2003

More reliable design of thermal transport. Power acquisition and thermal management systems requires the through understanding of the flow hydrodynamic. the differences and similarities between the two-phase flow characteristics of two-Phase flow influenced by the gravity levels. The data of flow Patterns, void fraction, frictional pressure drop associated with their characteristics were obtained at $\mu\textrm{g}$. 1g and 2g. Flow patterns and void fraction data obtained at three gravity levels were compared with each other and previous models and correlations.

• Journal of Korean Society on Water Environment
• /
• v.34 no.5
• /
• pp.462-469
• /
• 2018

There are differences in method and cycle of flow rate survey depending on purpose of the operating department. To verify and use results of flow data according to the purpose, flow data of the directly measured and tele monitoring system were compared to verify validity. Flow measurement in the Ministry of Environment is aimed at setting up a standard flow of target water quality for water quality management and securing flow data of low and normal water level seasons for water quality evaluation. In this study, correlation analysis result ($R^2$) of same time zone data by direct measurement and tele monitoring system (TMS) at Seombon D point, a unit watershed of Seomjin river, for six years ('10 ~ '15) according to implementation of Total Daily Maximum Load (TDML) was wading 0.716, boating 0.962 and on bridge 0.943, and effectiveness of measurement method was verified by characteristics of flow duration as a season of dry and low-water; normal and high water are appropriate for wading, boating, and on bridge respectively. Results revealed it is reasonable to use directly measured results using the wading and boating method for low water level and dry seasons, and TMS data for rainy seasons. It can be used important data for future policy decisions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.12
• /
• pp.1902-1918
• /
• 1993

Parallel architecture based on the von Neumann computation model has a limitation as a massively parallel architecture due to its inherent drawback of architectural features. The data-flow model of computation has a high programmability in software perspective and high scalability in hardware perspective. However, the practical programming and experimentaion of date-flow architectures are hardly available due to the absence of practical data-flow, we present a programming environment for performing the data-flow computation on conventional parallel machines in general, loosely compled multiprocessor system in particular. We build an emulator for tagged token data-flow architecture on the iPSC/2 hypercube, a loosely coupled multiprocessor system. The emulator is a shallow layer of software executing on an iPSC/2 system, and thus makes the iPSC/2 system work as a data-flow architecture from the programmer`s viewpoint. We implement various numerical and non-numerical algorithm in a data-flow assembler language, and then compare the performance of the program with those of the versions of conventional C language, Consequently, We verify the effectiveness of this programming environment based on the emulator in experimenting the data-flow computation on a conventional parallel machine.