• 한국의류학회지
• /
• 제34권1호
• /
• pp.112-125
• /
• 2010

A Holter monitor is used for ECG monitoring of ambulatory daily life in hospital. However, the use of this apparatus causes skin allergies and discomfort in patients because of the attachment gel and tapes used to attach disposable electrodes to the skin. In this study, the development of tight-fitting clothing connected to a portable Holter monitor was proposed. In addition, the use of conductive fabrics as electrodes was proposed; this will enable the use of garments in u-health care for measuring ECG signals. The male subjects were university students in the ages of 20 to 24. Subjective wear sensations of the experimental garments were rated using seven Likert scales. A Likert type scale was used for the evaluation and a 7 point score indicates that it provided the best fit as a tight-fitting upper clothing. Clothing pressure was measured using an air-pack-type pressure sensor (model AMI 3037-2) at 4 locations (the conductive fabric electrode) As results, a male basic sloper for upper clothing was developed and that pattern was manipulated to the tight fit pattern by considering the reduction rate of the percentage stretch in the fabric. The developed tight-fitting garment was superior in terms of subjective sensation and 6t. The mean pressure of the garment with reduction rates of 40% in width and of 50% in length was 8.45gf/$cm^2$. A conductive fabric electrode was developed by considering the sewing method and the developed electrode was detected well. The ECG data were recorded for 13 hr 19 min 44 sec and the artifacts in the ECG signals were recorded for 9 hr 3 min 46 sec (total time: 22 hr 23 min 23 sec). The artifacts data were obtained during heavy activities.

• Communications for Statistical Applications and Methods
• /
• 제6권2호
• /
• pp.367-374
• /
• 1999

Biological specimens contain several components and multilinear models are very useful in analyzing these data. After fitting the model the number of components are determined by the change of mean squared error however this method is quite rule of thumb. in this paper we suggest a measure to decide the number of components based on the relative change of to mean squared error. Simulations are done and applications to real data set are given as illustrations.

• Communications for Statistical Applications and Methods
• /
• 제2권1호
• /
• pp.48-54
• /
• 1995

A direct method for fitting analysis-of-variance models to unbalanced data is presented. This method exploits sparsity and rank deficiency of the matrix and is based on Gram-Schmidt orthogonalization of a set of sparse columns of the model matrix. The computational algorithm of the sum of squares for testing estmable hyphotheses is given.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.96-98
• /
• 2005

In this paper, an algorithm to compensate the distorted signals due to Current Transformer(CT) saturation is suggested, First, DWT which can be easily realized by filter banks in real-time applications is used to detect a start point and an end point of the saturation. Secondly, For enough Datas those need to use the least-square curve fitting method, the distorted current signal is compensated by the AR(autoregressive) model using the data during the previous healthy section until pick point of Saturation. Thirdly, the least-square curve fitting method is used to restore the distorted section of the secondary current. Finaly, this algorithm had a Hadware test using DSP board(TMS320C32) with Doble test device. DWT has superior detection accuracy and the proposed compensation algorithm which shows very stable features under various levels of remanent flux in the CT core is also satisfactory. And this algorithm is more correct than a previous algorithm which is only using the LSQ fitting method. Also it can be used as a MU involving the compensation function that acquires the second data from CT and PT.

• Journal of Computational Design and Engineering
• /
• 제3권1호
• /
• pp.14-23
• /
• 2016

The problem of fitting B-spline curves to planar point clouds is studied in this paper. A novel method is proposed to deal with the most challenging case where multiple intersecting curves or curves with self-intersection are necessary for shape representation. A method based on Delauney Triangulation of data points is developed to identify connected components which is also capable of removing outliers. A skeleton representation is utilized to represent the topological structure which is further used to create a weighted graph for deciding the merging of curve segments. Different to existing approaches which utilize local shape information near intersections, our method considers shape characteristics of curve segments in a larger scope and is thus capable of giving more satisfactory results. By fitting each group of data points with a B-spline curve, we solve the problems of curve structure reconstruction from point clouds, as well as the vectorization of simple line drawing images by drawing lines reconstruction.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.141-143
• /
• 2004

This paper represents 3D line segment extraction method, which can be used in generating 3D rooftop model. The core of our method is that 3D line segment is extracted by using line fitting of elevation data on 2D line coordinates of ortho-image. In order to use elevations in line fitting, the elevations should be reliable. To measure the reliability of elevation, in this paper, we employed the concept of self-consistency. We carry out the experiment of 3D line extraction using synthetic images generated from Avenches data set of Ascona aerial images.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제11권1호
• /
• pp.37-49
• /
• 2004

We are interested in the problem of fitting a sphere to a set of data points in the three dimensional Euclidean space. In Spath [6] a descent algorithm already have been given to find the sphere of best fit in least squares sense of minimizing the orthogonal distances to the given data points. In this paper we present another new algorithm which computes a parametric represented sphere in order to minimize the sum of the squares of the distances to the given points. For any choice of initial approximations our algorithm has the advantage of ensuring convergence to a local minimum. Numerical examples are given.

• Smart Structures and Systems
• /
• 제4권3호
• /
• pp.279-290
• /
• 2008

The modeling and parameter estimation of a damped one-degree-of-freedom mass-spring system is examined. This paper presents a method for estimating the system parameters (damping coefficients and natural frequency) from measured free-vibration motion of a system that is modeled to include both subcritical viscous damping and kinetic Coulomb friction. The method applies a commercially available least-squares curve-fitting software function to fit the known solution of the equations of motion to the measured response. The method was tested through numerical simulation, and it was applied to experimental data collected from a laboratory mass-spring apparatus. The mass of this apparatus translates on linear bearings, which are the primary source of light inherent damping. Results indicate that the curve-fitting method is effective and accurate for both perfect and noisy measurements from a lightly damped mass-spring system.

• 천문학회보
• /
• 제43권1호
• /
• pp.61.1-61.1
• /
• 2018

Outflows are common among local AGNs. Woo et al. (2017) suggested that AGN feedback through outflows is delayed by a dynamical time scale before the suppression of SFR is observationally detected. However, these SFR have large uncertainties because they were estimated by Artificial Neural Network (ANN) method (Ellison et al. 2016). We measured the SFR of 21 far-IR matched sources (z < 0.1) with total IR luminosity from multi-wavelength SED fitting from UV to radio. 15 out of 21 sources were observed with JCMT SCUBA-2 450 and 850um and 4 and 2 sources were matched with archival data of JCMT SCUBA-2 and Herschel SPIRE, respectively. We compared the true SFR by SED fitting with ANN-based one. In addition, we confirmed that sub-mm data are important to determine the SFR with total IR luminosity from SED fitting. Finally, we discuss the significance of true SFR and further the AGN-SF link.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.570-575
• /
• 2002

This paper presents a new circular curve fitting approach of articulated manipulators, based on pseudoinverses. The paper aims at gaining the interpolation of circle from n data points, under the condition that the fitted circle should pass both a start point and an end point. In this paper, two algorithms of circular interpolation are presented. Prior to circular interpolation, are a spherical fitting should be performed, using least squares. In the first algorithm, the relationship between point data and normal vector on the sphere is used. In the second algorithm. the equation of plane which can be obtained from 3 points, i.e., a start point, an end point, and center of a sphere. The proposed algorithms are show to be efficient by using MATLAB-based simulation.