• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.9
• /
• pp.2280-2289
• /
• 2009

The death rate of pedestrians in car accidents in Korea is about 2.5 times higher than the average of OECD countries'. If a system that can detect pedestrians and send alarm to driver is built and reduces the rate, it is worth developing such a pedestrian detection system (PDS). Since the accident rate in which pedestrians are involved is higher at nighttime than in daytime, the adoption of nighttime PDS is being standardized by big auto companies. However, they are usually using expensive night visions or multiple sensors for their PDS. In this paper we propose a method for nighttime PDS using a monochrome visible spectrum camera. We could verify its superiority in both performance and real?time operation to existing algorithm through tests against video data taken in several different environments.

• Journal of the Institute of Convergence Signal Processing
• /
• v.13 no.2
• /
• pp.106-112
• /
• 2012

Smart Highway is the intelligent highway that improves a traffic safety, reduces incidence of traffic accidents, and supports intelligent and convenient driving environment so that drivers can drive at high speeds in safety[1]. In order to implement the highway, it is required to gather a dangerous data such as obstacle, wild animal, disabled car, etc. To provide the situation information of the highway, it has been gathered traffic information using various sensors. However, this technique has problems such as the problems of various information gathering, lack of accuracy depending on weather conditions and limitation of maintenance. Therefore, in order to provide safe driving information to driver by gathering dangerous condition, radar system is needed. In this paper, we used a developing 34.5GHz RWR(Road Watch Radar) radar for gathering dangerous information and we verified performance of obstacle detecting and resolution through field test.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.4
• /
• pp.25-35
• /
• 2008

Variable Message Sign(VMS) is one of the subsystem of Intelligent Transportation Systems (ITS), which is useful for providing real-time information on weather, traffic and highway conditions. However, there are various situations such as incidents/accidents, constructions, special events, etc., which would be occurred on segments, it is unable to control traffic with only the VMS. Thus, it is essential to use of PVMS(Portable Variable Message Signs), which can move to the location needed traffic control and provide more active traffic information than VMS. This study developed a legibility distance model for PVMS messages using in-vehicle Differential Global Positioning Data(DGPS). Traffic conditions, drivers' characteristics, weather conditions and characteristics of PVMS message were investigated for establishing the legibility model based on multiple linear regression analysis. The factors such as height of PVMS characters, spot speed, age, gender and day and night were identified as dominants affecting the variation of legibility distances. It is expected that the proposed model would play a significant role in designing PVMS messages for providing more effective real-time traffic information.

• Journal of Korean Society of Transportation
• /
• v.17 no.1
• /
• pp.91-102
• /
• 1999

The objective of this study is to evaluate traffic management strategies using Variable Message Signs(MCS) on urban freeways. It is well known that real-time information on traffic conditions increases driver's comfort, and reduces the risks of accidents if drivers are aware of the traffic situation in advance, they decide whether to divert from the freeway or continue on the planned route. The experimental data collected on the Olympic highway we have shown the following results : 1. when the information on both the congested freeway and uncontested diversion route is displayed on the variable message sign. an additional 1.7 percent of traffic diverted, which results in a 3.7 percent reduction in total travel time. 2 Compared with one Proposed VMS message of 'reduce the speed', the other Proposed VMS message of 'keep speed 70km/h' is found to be much more effective in reducing mean speed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.10
• /
• pp.1858-1865
• /
• 2007

In this paper, we introduce the design and implementation of satellite IP modem. The designed satellite IP modem shows the performance of 0.2% overhead, BER=10-5 when Eb/No=6dB, frequency offset of 8KHz, data rate up to 1536Kbps, $F_{if}=140MHz$. The designed system is verified through software simulation and then implemented with MPC86x communication processor, TMS320C6416 DSP, and Altera FPGA. Since each hardware unit is implemented in daughter board for modularity, we can reduce the development time and easily improve the performance with using better processor. Linux is used for embedded OS because it shows better performance in IP manipulation multitask processing, and hardware control through device driver. The implemented system is tested and verified with channel simulator. Since the proposed IP modem shows small size and light weight, that can be used anywhere with easy if you need IP environment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.12
• /
• pp.1639-1644
• /
• 2018

Unlike internal combustion engines, electric cars have little engine sound and very quiet, causing the following problems to occur. First of all, pedestrians are a threat to safety because they can't feel the car approaching. The driver is also unable to recognize how fast his car is driving at a certain speed. To solve these problems, electric cars should be artificially created and reused. This paper examines the problems of the Sampling engine sound currently being used and uses the engine sound to produce a sound engine sound for the solution. The sampling engine sound has some limitations in making natural engine sounds. To overcome this problem, we studied two methods of using software synthesizers. They found subtractive synthsizing and wavetable synthsizing, which compared wavetabe synthsizing with actual engine, sampling and subtractive methods to find the most similar to real engine sound. We found that data usage and production cost are more advantageous than sampling method and subtractive syndication method.

• Journal of Trauma and Injury
• /
• v.31 no.3
• /
• pp.151-158
• /
• 2018

Purpose: The regional emergency medical centers manage the patients with major blunt trauma according to the process appropriate to each hospital rather than standardized protocol of the major trauma centers. The primary purpose of this study is to evaluate the effectiveness and influence on prognosis of additional cervical-thoracic-lumbar-spine computed tomography (CTL-spine CT) scan in diagnosis of spinal injury from the victim of major blunt trauma with impaired consciousness. Methods: The study included patients visited the urban emergency medical center with major blunt trauma who were over 18 years of age from January 2013 to December 2016. Data were collected from retrospective review of medical records. Sensitivity, specificity, positive predictive value, and negative predictive value were measured for evaluation of the performance of diagnostic methods. Results: One hundred patients with Glasgow coma scale ${\leq}13$ underwent additional CTL-spine CT scan. Mechanism of injury was in the following order: driver, pedestrian traffic accident, fall and passenger accident. Thirty-one patients were diagnosed of spinal injury, six of them underwent surgical management. The sensitivity of chest, abdomen and pelvis CT (CAP CT) was 72%, specificity 97%, false positive rate 3%, false negative rate 28% and diagnostic accuracy 87%. Eleven patients were not diagnosed of spinal injury with CAP CT and C-spine lateral view, but all of them were diagnosed of stable fractures. Conclusions: C-spine CT scan be actively considered in the initial examination process. When CAP CT scan is performed in major blunt trauma patients with impaired consciousness, CTL-spine CT scan or simple spinal radiography has no significant effect on the prognosis of the patient and can be performed if necessary.

• Convergence Security Journal
• /
• v.19 no.1
• /
• pp.97-101
• /
• 2019

If the operating system's core file contains an Intel PT, the debugger can not only check the program state at the time of the crash, but can also reconfigure the control flow that caused the crash. We can also extend the execution trace scope to the entire system to debug kernel panics and other system hangs. The second-generation PT, the WinIPT library, includes an Intel PT driver with additional code to run process and core-specific traces through the IOCTL and registry mechanisms provided by Windows 10 (RS5). In other words, the PT trace information, which was limited access only by the first generation PT, can be executed by process and core by the IOCTL and registry mechanism provided by the operating system in the second generation PT. In this paper, we compare and describe methods for collecting, storing, decoding and detecting malicious codes of data packets in a window environment using 1/2 generation PT.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.1
• /
• pp.63-70
• /
• 2019

The number of vehicle-to-barrier collisions has increased due to improved driving environments. In addition, it is reported that the number of accidents led to impact severity larger than current capacity of a median barrier has increased. It is required to develop a high performance median barrier in order to secure expressway safety. This paper aims at proposing impact loading model and locations for a high performance median barrier based on analysis of median-barrier-related accident history. The SB6 test level (Impact severity: 420 kJ, Mass: 25 ton, Impact speed: 80 km/h, Impact angle: $15^{\circ}$) was suggested for target impact severity based on statistical data analysis. The suitable locations also were proposed from investigation of driver behaviors for installation and rehabilitation of high performance median barrier.

• The Korean Journal of Emergency Medical Services
• /
• v.23 no.1
• /
• pp.61-69
• /
• 2019

Purpose: The study aims to provide basic data to enhance the health of paramedics responsible for patient transport and treatment by analyzing the exposure level of paramedics to electromagnetic waves generated by electric devices used in ambulances. Methods: The study measured electromagnetic waves in ambulances in N region from July to December 2018. ME3030B produced by German Gigahertz Solutions was used to measure these waves and the maximum value was selected by moving it slowly in various directions. Each measurement part was selected and the mean value was calculated by repeatedly measuring at 10-minute intervals three times in total: $1^{st}$, $2^{nd}$, and $3^{rd}$ phase. Results: Among the electrical devices installed in the patient room of the ambulance measured at distances of 1 cm or 30 cm, results showed a high level of electric waves at the inverter ($26.25{\pm}39V/m$) and high level of electromagnetic waves ($564.00{\pm}31.75nT$) at the ozone sterilizer. According to measurements toward the front near the driver's seat, results indicated high levels of electric waves ($3.67{\pm}1.15V/m$) and electromagnetic waves ($450.00{\pm}19.52nT$) at the black box hard drive. Conclusion: Electromagnetic waves within the ambulance were stable and not beyond the range that might impact human health. However, in the case of the black box hard drive ($3.67{\pm}1.15V/m$, $450.00{\pm}19.52nT$) located under the passenger seat, it may have a direct effect on the human body and, thus it is necessary to move it to a storage area further away from the paramedics to minimized the impact.