• 한국유기농업학회지
• /
• 제28권4호
• /
• pp.535-553
• /
• 2020

In this study, the characteristics of the waste sector CDM project were analyzed through cluster analysis of the waste sector CDM project and the analysis of the CDM investment cost in waste sector using CDM project data registered with UNFCCC since 2008 when EU ETS phase 2 began. As of September 2020, 772 cases of CDM projects in waste disposal and disposal are registered. Biogas technology is the largest, followed by livestock manure processing and biomass production technology. The results of the cluster analysis are summarized as follows: First, on average, projects utilizing AWMS technology are small in size and relatively low in investment costs. This is judged to be relatively low investment costs due to previously attracted foreign investment capital. Second, the average investment cost of CDM projects considered along with waste (No.13), the energy industry (No.1) and agriculture (No.15) was higher than those involving only waste. The analysis of the factors determining the investment cost of the waste sector CDM project showed that, as with cluster analysis, the AWMS technology, which is a livestock manure treatment technology, was lower in the investment cost than those that use other technologies. As a result of multiple regression analysis, the investment cost of the CDM project was analyzed lower in the order of biomass, AWMS, LFG and biogas. Also, the higher the investment cost for CDM projects linked to waste, energy and agriculture, and the better the investment environment, the higher the investment cost. Although no statistical feasibility was obtained, the larger the annual emission reduction, the lower the CDM investment cost.

• Advances in environmental research
• /
• 제8권1호
• /
• pp.23-38
• /
• 2019

In this study, Malachite Green (MG) dye removal from synthetic wastewaters by adsorption process using raw boron enrichment waste (BEW) and it's modifications (with acid and ultrasound) were aimed. 81% MG removal was obtained by BEW at optimum equilibrium conditions (time: 40 min., dosage: 500 mg/dm³, pH: 5-6, speed: 200 rpm, 298 K). MG removal from wastewaters using acid modified boron enrichment waste (HBEW) was determined as 82% at optimum conditions (time: 20 min., dosage: 200 mg/dm³, pH: 10, speed: 200 rpm, 298 K). For ultrasound modified BEW (UBEW), the highest MG removal percent was achieved as 84% at optimum conditions (time: 30 min, dosage: 375 mg/ dm³, pH: 8, speed: 200 rpm, 298 K). The equilibrium data of Malachite Green was evaluated for BEW, HBEW and UBEW adsorbents by using sorption isotherms such as Langmuir, Freundlich and Temkin models, out of which Langmuir model (R² = 0.971, 0.987 and 0.984) gave better correlation and maximum adsorption capacity was found to be 147.05, 434.78 and 192.30 mg/g, respectively. The adsorption kinetics followed the pseudo-second-order kinetic equation for sorption of MG onto wastes. A look at thermodynamic data reveals that natural sorption is spontaneous and endothermic because of free negative energy exchange and positive change in enthalpy, respectively. The results indicated that boron enrichment waste, and HCl and ultrasound-modified boron enrichment waste served as good alternative adsorbents in dye removal from wastewater.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2003년도 가을 학술논문집
• /
• pp.665-670
• /
• 2003

우라늄 변환시설 내의 lagoon 슬러지의 처리 공정에서 발생하는 고농도 질산염 폐액의 처리를 위해 질산염 폐액의 열역학 및 열분해 특성을 조사하였다. 열역학적 특성은 고농도 질산염 폐액의 조성을 바탕으로 COACH와 GEMINKI II를 사용하여 조사하였으며, 열분해 특성은 TG/DTA, XRD 분석을 통하여 실제 질산염 폐액에 대하여 조사하였다. 폐액 내 함유 성분 중 $NH_4NO_3$는 $^250{\circ}C$에서 모두 분해되었으며, 잔류물의 대부분을 차지하는 $NaNO_3$는 $730^{\circ}C$에서 분해되는 것으로 나타났다. $NaNO_3$의 분해생성물인 불안정한 $Na_2O$를 안정한 화합물로 변화시켜 주기 위하여 $Al_2O_3$를 첨가할 경우 $NaNO_3$는 $450^{\circ}C$의 낮은 온도에서 분해 가능하였다. 이 같은 열역학 및 열분해 특성을 바탕으로 고농도 질산염 폐액의 처리 공정도를 제시하였으며, 특성 자료는 공정 모사의 기초 자료로 활용될 것이다.

• World Technopolis Review
• /
• 제3권2호
• /
• pp.89-96
• /
• 2014

Center for Research of Science and Technology ("PUSPIPTEK") has 460 hectares land area, still maintained as a green area with more than 30% green space. There are 47 centers for research and testing technology, technology-based industries, and as well as public supporting facilities in PUSPIPTEK area. Based on the concepts developed to make this area as an ecological region, PUSPIPTEK can be seen as a model of eco-innovation. The purpose of this research is to develop a model of water, energy and waste management with eco-innovation concept. As a new approach in addressing environmental degradation and maintaining the sustainability of ecosystem, studies related to eco-innovation policy that combines the management of water, energy and waste in the region has not been done. In order to achieve the objectives of the research, a series of techniques for collecting data on PUSPIPTEK existing conditions will be carried out, which includes utilities data (water, electricity, sewage) and master plan of this area. The savings over the implementation of the concept of eco-innovation in water, energy, and waste management were calculated and analyzed using quatitative methods. The amount of cost savings and feasibility were then calculated. Eco innovation in water management among other innovations include the provision of alternative sources of water, overflow of rain water and water environments utilization, and use of gravity to replace the pumping function. Eco-innovation in energy management innovations include the use of LED and solar cell for air conditioning. Eco-innovation in waste management includes methods of composting for organic waste management. The research results: (1) The savings that can be achieved with the implementation of eco innovation in the water management is Rp. 3,032,640 daily, or Rp.1,106,913,600 annually; (2) The savings derived from the implementation of eco innovation through replacement of central AC to AC LiBr Solar Powered will be saved Rp.1,933,992,990 annually and the use of LED lights in the Public street lighting PUSPIPTEK saved Rp.163,454,433 annually; (3) Application of eco innovation in waste management will be able to raise awareness of the environment by sorting organic, inorganic and plastic waste. Composting and plastic waste obtained from the sale revenue of Rp. 44,016,000 per year; (4) Overall, implementation of the eco-innovation system in PUSPIPTEK area can saves Rp. 3,248,377,023 per year, compared to the existing system; and (5)The savings are obtained with implementation of eco-innovation is considered as income. Analysis of the feasibility of the implementation of eco-innovation in water, energy, and waste management in PUSPIPTEK give NPV at a 15% discount factor in Rp. 3,895,228,761; 23.20% of IRR and 4.48 years of PBP. Thus the model of eco-innovation in the area PUSPIPTEK is feasible to implement.

• International journal of advanced smart convergence
• /
• 제4권1호
• /
• pp.127-136
• /
• 2015

This paper is a study of a simple distillation process. Its objective is to compare fuel production from plastic waste, its data collecting is from the factory and simple data calculated a suitable evaluation on the simple distillation plant built before calculation. The experiment with a simple distillation process is separated into three sections. The first section is a simple distillation process of distillation producing diesel using heat source by biomass. The second section is distillation process which produces fuel using heat source by burner. The third section uses heat source by burner incorporate with biomass. The experiment reveals that the result of the second section is the most efficient. In comparison with the experiments and the simple calculation, the result on the efficiency of work has error less than 5% and it is sufficient for the next experimental process. Thus, the study and design on a simple distillation process produces fuel from plastic waste has to concern mainly on design heat exchangers, flow rate and optimized temperature. Further study on this plant can be developed throughout the county due to its low cost and efficiency.

• 환경위생공학
• /
• 제13권3호
• /
• pp.9-18
• /
• 1998

An experimental research was conducted to establish primary data for the stabilization assessment of industrial wastes landfill with analysis of waste components and investigation of leachate and gas generation, using three sets of lysimeter as experimental apparatus. Comparing results of lysimeter from data of landfill, it is suggested that lysimeter of this study can be used to accomplish the stabilization assessment of the real landfill site. Moisture content was lower as landfill period was older and combustible component was the highest in lysimeter C. The C/N ratio of waste was 7.4~14.4 and, with the elemental analysis, the theoretical gas generation rate based on the modified Buswell equation was 0.47~0.49 $m^3/kg-dry$ waste in lysimeter C. Considering the C/N ratio of leachate, it is concluded that the addition of carbon source is needed to biodegrade leachate hereafter. Gas generation rate($m^3/kg-dry$ waste) from lysimeter A, B and C was 0.0009, 0.014 and 0.0067, respectively, and different from each other according to the landfill period of wastes. The results in this study show that the biodegradation of microorganism for stabilization of landfill was inhibited and more activated in acidogenic step than in methanogenic of anaerobic degradation.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2022년도 춘계학술대회
• /
• pp.346-348
• /
• 2022

적재폐기물에서 발생하는 발효열의 발화요인 분석 자료를 기반으로 발생 원인을 규명하는 모니터링 시스템을 구성하였다. 화재 조기경보 유형별 시나리오의 구성과 신속성을 위해 실시간 런타임 환경을 제공하기 위한 유니버설미들웨어를 활용하였다. 적재폐기물의 적재 높이와 압력, 대표적인 구성폐기물인 목재, 건전지, 플라스틱 폐기물의 건조, 표면의 탄화변화를 동적으로 인지해야 한다. 따라서, 저온발화 화재 가능성 데이터 분석을 위한 IoT 상황인지 플랫폼을 동적으로 구성하여 제시하였다.

• 대한영양사협회학술지
• /
• 제14권1호
• /
• pp.1-12
• /
• 2008

The Purposes of this study were to assess high school students' nutrient consumption at the ordinary time and to analyze nutrient contents and nutrition consumption of lunch. The questionnaires for self-reported food consumption were distributed to 210 students enrolled in a boy's high school and a girl's high school located in Seoul area. A final response rate was 87.1%, excluding responses that had significant missing data. Data of self-reported food consumption and BMI(Body Mass Index) were analyzed with descriptive analysis and t-test using SPSS Win(ver. 12.0). To measure the serving size and the waste amount, data were collected for three meals in a three day period at each school. A weighed plate method was employed to measure plate wastes and consumption of the menus served. Nutrient analyses for the served and consumed menus were performed using CAN-PRO. The result of nutrient intake determined by self-reported food consumption demonstrated 74.2% of boys and 70.0% of the girls did not meet EAR(Estimated Average Requirement) for calcium. In addition, the data collection showed that 60.2% boys and 26.7% girls did not consume EAR for Vitamin B$_1$. Nutrient analyses of the served and consumed menus at school lunch were compared with 1/3 of the Dietary Reference Intakes(DRIs) for this age group. The served menus did not meet 1/3 of the Recommended Intake(RI) for calcium, iron, and vitamin B$_2$. In contrast, the menu provided to students exceeded almost five times(490%) more than the sodium needed for 1/3 of the Adequate Intake(AI). Considering the amount of the students' plate waste, intake of vitamin A and vitamin C were below 1/3 of the RI, and calcium, iron, and vitamin B$_2$ intake were also reduced. Students' sodium consumption still exceeded 1/3 of the AI at 340.0%.

• 한국지리정보학회지
• /
• 제3권4호
• /
• pp.33-49
• /
• 2000

본 논문은 도시지역의 폐기물 매립지의 적지선정에 GIS기법을 적용한 사례연구를 제시한 것이다. 폐기물 매립지의 적지분석을 위한 여러 가지 평가인자들을 결정하고 데이터의 수집, 입력, 변환을 통하여 데이터베이스가 구축되었다. 또한 위성영상의 처리에 의해 대상지역의 최근 토지피복 분류와 식생활력도(NDVI) 데이터가 평가인자로서 GIS데이터에 통합되었다. 사회경제적 인자와 자연환경적 인자로 구분되는 1차 분류 평가인자들의 가중치를 이원비교법에 의해 결정된 2차분류 평가인자들의 가중치와 조합하여 분석하였다. 사례연구의 결과, 여러 가지 평가기준에 따른 적합성 분석이 가능하였으며, 사회경제적 인자를 중요하게 간주하는 관점에서 2차 분류 평가인자들의 가중치를 중요도에 따라 다르게 부여한 경우에서 가장 높은 적합도가 얻어졌다.

• 한국도로학회논문집
• /
• 제16권5호
• /
• pp.39-47
• /
• 2014

PURPOSES : This study aimed to analyze economic effect of recycled aggregate production on job-site airport pavement. METHODS : The validation of site recycling for waste concrete as economic efficiency is analyzed through the case study of site recycling at an O airport pavement construction. The break-even point for the cost of site recycling was estimated according to two different waste concrete processing methods such as job-site recycling and processing on commission (or plant). RESULTS : Job-site recycling cost decreases as the use rate of job-site recycled concrete aggregate increases, or the amount of concrete waste increases, but transporting distance decreases. It was shown in an O airport case that as the use rate of job-site recycled concrete aggregate exceeds 61.4 %, the job-site recycling cost is cheaper than the processing cost on commission. CONCLUSIONS : The results of this study can utilize basic data of feasibility for site recycling of waste concrete on airport pavement construction.