• 한국재난정보학회 논문집
• /
• 제4권1호
• /
• pp.86-100
• /
• 2008

It is needed to classify the kinds of construction and demolition(c&d) debris to 6 catagories of waste concrete, waste asphalt concrete, waste wood, scraps, combustible waste and incombustible waste in order to properly do a separate discharge and to estimate unit generation rate in construction site. Also, in this case, the unit treating cost for mixed wastes should be applied with the unit treating cost for combustible waste. The construction standard materials estimation data is used for basic data for estimating unit generation rate. The mixed wastes in this data should be classified to waste wood, combustible waste and incombustible waste, and their ratio is obtained by using the unit generation rate of Asia Pacific Environment and Management Institute and Seoul Metropolitan Development Institute. The waste amounts generated from newly-built construction can be obtained from multiplying the loss rate by the amount of materials used from construction standard estimation data. Also, those from dismantling construction can be obtained by subtracting waste amount generated during newly-built construction from total input amount of materials in newly-built construction. Those in two cases can be used in construction site. It can be used for estimating the amount generated and establishing the treating plan in the case of setting up the policy of waste management and doing the environment impact assessment.

• 환경영향평가
• /
• 제8권1호
• /
• pp.17-27
• /
• 1999

Applicability of LCA in establishing the integrated solid waste management were examined. Data were collected from current waste management system. LCA method was then applied to find environmentally sustainable waste management. The process comprises five steps : (1) collecting data, comparing the data with comprehensive urban planning as well, (2) analyzing the current waste treatment procedure leading to the database establishment, (3) LCA for the waste management system, (4) finding alternative scenarios based on the former steps, (5) establishing the optimum method in Ecopolis, best fitted to the local situation. The results and suggestions in this study are expected to yield comprehensive analysis as to current practices in waste management. More importantly it will be a valuable data in minimizing environmental burdens in connecting with living environments of Ecopolis. Information regarding the urban system and total environmental quality are expected from this study.

• 지질공학
• /
• 제33권2호
• /
• pp.323-334
• /
• 2023

고준위방사성폐기물 처분을 위한 다양한 조사와 연구를 진행하는 과정에서 막대한 양의 자료가 생산되며 이를 관리하기 위한 자료 관리가 필요하다. 스웨덴의 SKB는 SICADA를 구축하여 부지선정, 평가, 해석, 분석 및 모델링에 활용할 수 있게 하였고, 독일의 BGE는 부지선정법에 따라 자료를 관리하기 위해 데이터베이스 및 문서 관리시스템 ArbeitsDB와 자료시스템 ELO를 구축하였다. 영국의 NWS는 DMS를 구축하여 연구, 조사 자료를 관리할 수 있도록 하였다. 미국의 DOE와 OCRWM은 부지특성화 조사를 진행하면서 자료 관리 및 이후의 인허가 절차를 위하여 TDMS를 구축하였다. 해외사례 조사, 분석을 통해 자료의 품질관리와 자료 활용의 확장성이 자료 관리에 있어 중요한 부분임을 확인할 수 있다. 향후 우리나라도 장기적인 관점에서 자료의 품질관리와 확장성을 고려한 자료 관리 개념을 확립하고 그에 맞춘 자료 관리 시스템 및 체계를 구축해야 할 것이다.

• Nuclear Engineering and Technology
• /
• 제54권1호
• /
• pp.414-422
• /
• 2022

Presented in this paper is a methodology for combining a Bayesian statistical approach with Data Quality Objectives (a structured decision-making method) to provide increased levels of confidence in analytical data when approaching a waste boundary. Development of sampling and analysis plans for the characterisation of radioactive waste often use a simple, one pass statistical approach as underpinning for the sampling schedule. Using a Bayesian statistical approach introduces the concept of Prior information giving an adaptive sample strategy based on previous knowledge. This aligns more closely with the iterative approach demanded of the most commonly used structured decision-making tool in this area (Data Quality Objectives) and the potential to provide a more fully underpinned justification than the more traditional statistical approach. The approach described has been developed in a UK regulatory context but is translated to a waste stream from the Fukushima Daiichi Nuclear Power Station to demonstrate how the methodology can be applied in this context to support decision making regarding the ultimate disposal option for radioactive waste in a more global context.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1452-1455
• /
• 2008

In order to establish active and effective recycling plans on construction wastes, the study seeks to built unit generation data per construction waste types on each sector, prepare units data on urban construction waste generation and serve as meaningful data on the establishment of policies on construction waste recycling targeting urban regions. The significance of the study is on the establishment of construction waste recycling plan prior to generation, not as complementary measures on construction waste generated.

• 방사성폐기물학회지
• /
• 제12권4호
• /
• pp.345-361
• /
• 2014

처분시설의 개발과정에서 안전성평가 문서관리는 체계적인 품질활동이 수반되어야 하며, 본 논문에서는 중 저준위 방사성폐기물 처분시설의 건설단계에 보완된 부지특성, 지하수특성, 최종설계내용 및 모니터링 입력데이터를 포함하여 Safety Case를 위한 안전성평가 입력데이터 품질보증체계를 설명하였다. 현장/실험결과데이터, 실제 설계데이터 및 적치계획, 콘크리트 물성데이터, 지하수, 기상, 지진에 대한 현장 모니터링데이터, 생태계데이터 및 핵종재고량데이터를 입력데이터 결정원칙에 따라 선별하고 안전성평가에 적용할 수 있는 데이터 관리체계를 확보하였다. 이는 향후 처분시설 안전성평가의 데이터 불확실성 저감 및 안전성 증진에 기여할 것으로 판단된다.

• Journal of Nuclear Fuel Cycle and Waste Technology
• /
• 제1권1호
• /
• pp.37-47
• /
• 2013

This paper describes basic plans for the development of a radioactive waste disposal facility with the introduction of Nuclear Power Plants (NPPs) for Kenya. The specific objective of this study was to estimate the total projected waste volumes of low- and intermediate-level radioactive waste (LILW) expected to be generated from the Kenyan nuclear power programme. The facility is expected to accommodate LILW to be generated from operation and decommissioning of nuclear power plants for a period of 50 years. An on-site storage capacity of 700 $m^3$ at nuclear power plant sites and a final disposal repository facility of more than 7,000 $m^3$ capacity were derived by considering Korean nuclear power programme radioactive waste generation data, including Kori, Hanbit, and APR 1400 nuclear reactor data. The repository program is best suited to be introduced roughly 10 years after reactor operation. This study is important as an initial implementation of a national LILW disposal program for Kenya and other newcomer countries interested in nuclear power technology.

• 시스템엔지니어링학술지
• /
• 제17권1호
• /
• pp.76-84
• /
• 2021

Radioactive waste generated from nuclear power plant decommissioning shall be strictly managed so that radioactive materials above the allowable limit are not leaked into the environment. Radioactive wastes shall be classified and treated for management based on characteristics such as the type of waste, physicochemical properties, nuclide concentration and radioactivity. Waste characterization report shall be prepared and submitted to the disposal facility operator to ensure that the treated waste is suitable for disposal. The disposal facility operator shall review the waste Characterization report and visit the nuclear power plant decommissioning site to ensure that the wastes are processed step by step according to the plan. The waste Characterization report may be used as input data to evaluate disposal facility safety. Domestic and foreign data are collected and reviewed to confirm the entire processes from waste generation to delivery. This paper proposes the method to prepare the waste Characterization report which contains data and information on waste characteristics, treatment facilities & method and packaging method & container.

• Journal of the Korean Wood Science and Technology
• /
• 제51권5호
• /
• pp.392-409
• /
• 2023

The amount of wood waste from furniture production is increasing. Wood waste is diverse and ranges from wood-splitting residues to leftovers from furniture production. Wood waste occurs in companies, household-based industries, and other forms of business where waste accumulates; therefore, an environmental and ethical policy is needed. The aim of this study was to identify products created using wood waste and describe government regulations related to environmental policies. We analyzed the management of wood waste for use as a new product so that it is useful, does not become waste, and complies with policies related to environmental ethics. A case study design using qualitative methods was used. This research focused on managing wood waste in Jepara's furniture and crafts industry for the 2010-2021 period, using 23 sources from primary, secondary, and other supporting documents. Data were collected through observation or gathering information related to research needs, conducting closed-door interviews with research sources, documenting data to strengthen research findings, and using online questionnaires to corroborate information related to wood waste management. This article presents wood waste products designed with optimized environmental ethics and awareness of environmental laws in wood-based industries.

• 유통과학연구
• /
• 제21권8호
• /
• pp.35-45
• /
• 2023

Purpose: This paper (1) identifies the factors that affect people's changing habits towards waste sorting, (2) evaluates the benefits of waste sorting to the environment and (3) designs communication strategies to change people's behavior and habits in sorting plastic waste in Ho Chi Mnh City, Vietnam. Research design, data and methodology: Using the data from 309 people that are living in Ho Chi Minh City and Structural Equation Modeling (SEM), to evaluate variables and test the hypotheses. Results: Research results show that attitudes, subjective standards, behavioral control, and facilities affect people's intention to classify plastic waste. We find that environmental concerns greatly influence people's attitudes. In contrast, environmental concerns have a relatively weaker effect on people's degree of behavioral control. Conclusion: Environmental protection is a matter of concern in the world. In Vietnam, this issue has been institutionalized into law to create a basis for improving the effectiveness of environmental protection activities. This article has some limitations. Firstly, sample is limited to HCMC residents; the study results are not representative of the entire population of Vietnam. This paper is based on cross-sectional data, which is not the best way to establish a causal relationship between the intention to sort plastic waste and its drivers.