• 전자공학회논문지CI
• /
• 제48권6호
• /
• pp.149-157
• /
• 2011

본 논문에서는 DPCM 기반의 새로운 비행데이터 전송방법을 제안한다. LRU에서 MC로 전송되는 비행데이터의 양은 항공기의 성능향상과 기능의 다양화로 인해 크게 증가되었다. 이는 MC에서 요구되는 Hard Real-Time 조건을 만족시키기 어렵게 한다. 이러한 문제를 해결하기 위해 X-Plane 시뮬레이터에 의해 생성된 비행데이터를 관찰하여 대부분의 비행데이터들은 완만한 변화를 보인다는 것을 확인하였다. 이 사실에 기초하여 ARINC-429 프로토콜의 수정을 통해 비행데이터의 차분 값을 전송하는 새로운 데이터 포맷과 기법을 제안 한다. 실험결과 기존의 ARINC-429 방법에 비해 20% 성능향상이 있음을 보였다.

• 한국정보통신학회논문지
• /
• 제17권4호
• /
• pp.885-892
• /
• 2013

TCP/IP소켓 통신을 활용하여 데이터를 송수신하는 송수신 모델에서 데이터의 크기가 작고 데이터 전송 요청이 빈번하지 않을 경우 서버와 클라이언트 간 통신 속도의 중요성은 부각되지 않지만 오늘날 대용량 데이터에 대한 전송 요청과 빈번한 데이터 전송 요청에서 송수신 모델의 통신 속도에 대한 중요성이 부각되고 있다. 본 논문은 대용량의 데이터를 전송하는 서버의 전송 구조와 데이터를 수신하는 클라이언트의 수신 구조를 변경하여 멀티 코어(이하 CMP : ChipMulti Processor) 환경에서 데이터 전송 속도에 대한 성능향상을 기대할 수 있는 보다 효율적인 TCP/IP 송수신 모델을 제안한다.

• 한국멀티미디어학회논문지
• /
• 제18권4호
• /
• pp.492-498
• /
• 2015

In general, data packets from sensor nodes are transferred to the sink node in a wireless sensor networks. So many data packets are gathered around the sink node, resulting in significant packet collision and delay. In this paper, we propose an efficient packet transmission mechanism for multi-hop wireless sensor networks. The proposed mechanism is composed of two modes. One mode works between sink node and 1-hop nodes from sink. In this mode, data packets are transmitted in predefined time slots to reduce collisions. The other mode works between other nodes except sink node. In this mode, duplicated packets from neighbor nodes can be detected and dropped using some control signals. Our numerical analysis and simulation results show that our mechanism outperforms X-MAC and RI-MAC in terms of energy consumption and transmission delay.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권6호
• /
• pp.1357-1378
• /
• 2013

Energy constraint of wireless sensor networks makes energy saving and prolonging the network lifetime become the most important goals of routing protocols. In this paper, we propose an Energy Efficient Chain-based Routing Protocol (EECRP) for wireless sensor networks to minimize energy consumption and transmission delay. EECRP organizes sensor nodes into a set of horizontal chains and a vertical chain. Chain heads are elected based on the residual energy of nodes and distance from the header of upper level. In each horizontal chain, sensor nodes transmit their data to their own chain head based on chain routing mechanism. EECRP also adopts a chain-based data transmission mechanism for sending data packets from the chain heads to the base station. The simulation results show that EECRP outperforms LEACH, PEGASIS and ECCP in terms of network lifetime, energy consumption, number of data messages received at the base station, transmission delay and especially energy${\times}$delay metric.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2000년도 추계학술대회 학술발표 논문집
• /
• pp.413-418
• /
• 2000

For Pneumatic system control, we need a data transmission system with high speed and high realibility for information interchange between main computer and solenoid valves and I/O devices. This paper presents a set of design techniques for a data communication system that is mainly used for pneumatic system control. For this purpose, we first designed hardware modules for an interface between central control module and local node that handles the operation of solenoid valves. In addition we developed a communication protocol for construction of RS-485 based multidrop network, and this protocol is basically designed with a kind of polling technique. Finally we evaluated performance of the developed system. The field test results show that, even under high noise environment, the data transmission of 375Kbps rate is possible up to 1,000m without using repeater. In addition, the system developed in this research is proved to be used easily for extension of a communication network because of its module structure.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.150.2-150
• /
• 2001

For pneumatic system control, we need a data transmission system with high speed and reliability for information interchange between main computer and I/O devices. This paper presents a set of design techniques for a data communication system that is mainly used for pneumatic system control. For this purpose, we first designed hardware modules for an interface between central control module and local node that handles the operation of solenoid valves. In addition, we developed a communication protocol for construction of RS-485 based multi-drop network, and this protocol is basically designed with a kind of polling technique. Finally we evaluated performance of the developed system. The field test results show that, even under high noise environment, the data transmission of 375Kbps rate is ...

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권6호
• /
• pp.2333-2353
• /
• 2020

This paper proposes a novel data prioritization and transmission mechanism to minimize the number of packets transmitted and reduce network overload using the constrained application protocol (CoAP) in resource-constrained networks. The proposed scheme adopts four classification parameters to classify and prioritize data from a sensor. With the packet prioritization scheme, the sensed data having the lowest priority is only delivered using the proposed keep-alive message notification to decrease the number of packets transmitted. The performance evaluation demonstrates that the proposed scheme shows the improvement of resource utilization in energy consumption, and bandwidth usage compared with the existing CoAP methods. Furthermore, the proposed scheme supports quality-of-service (QoS) per packet by differentiating transmission delays regarding priorities.

• International journal of advanced smart convergence
• /
• 제2권1호
• /
• pp.27-29
• /
• 2013

This paper discusses comparative analysis of the effects of surge protection devices (SPD) upon the power line communication channels. The quality of the data transmission channel is measured based on the data rate for the various channel parameters which include channel length and application method of the lightning protection device. The performance measurements are also carried out for various lengths of the communication channel. Experiment results show that specific combination of SPDs applied in the network causes severe degradation of the channel quality which is associated with the combination of grade levels and channel lengths.

• 전자공학회논문지B
• /
• 제30B권5호
• /
• pp.90-102
• /
• 1993

In this paper, we propose a prgressive image transmission technique using hierarchical pyramid data structure which is constructed based on the projection data of an image. To construct hierarchical Gaussian pyramids, we first divide an image into 4$\times$4 subblocks and generate the projection data of each block along the horizontal, vertical, diagonal, and antidiagonal directions. Among images reconstructed by backprojecting the projection data along a single direction, the one giving the minimum distortion is selected. The Gaussian pyramid is recursively generated by the proposed algorithm and the proposed Gaussian images are shown to preserve edge information well. Also, based on the projection concept a new transmission scheme of the lowest Laplacian plane is presented. Computer simulation shows that the quantitative performance of the proposed pyramid coding technique using projection concept is similar to those of the conventional methods with transmission rate reduced by 0.1 ~ 0.2 bpp and its subjective performance is shown to be better due to the edge preserving property of a projection operation.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2011년도 추계학술대회
• /
• pp.78-81
• /
• 2011

본 논문에서는 ATSC (Advanced Television Systems Committee) 지상파 DTV (digital television) 방송 시스템에서 부가 데이터 전송률을 향상시키면서 비트 오율 (bit error rate) 성능을 개선하기 위한 다중 안테나 부가데이터 전송 방식을 제안한다. 제안된 다중 안테나 전송방식은 Alamouti 기법을 사용하여 단일 안테나 전송 방식에 비해 신호대 잡음비 이득을 얻는다. 또한, 제안하는 전송 방식은 기존의 ATSC 지상파 DTV 수신기와 역호환성을 가진다는 장점이 있다.