• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.97-98
• /
• 2006

This study deals with the Transmission Error of gear tooth profile by modifying a Profile and lead of a surface of Tooth. First, we experimentally confirmed that the Transmission Error is a synthesis of the sliding Velocity between both gears. Since various types of Transmission errors appear in the experiments, we introduced definition of Transmission Error and The Optimism Design by modifying a surface parameters The test stand's performance is then evaluated through a series of multiple torque transmission error tests. Comparisons are made between data recorded before and after the test stand's redesign, and subsequently repeatability studies are performed to verify the veracity of the measured data. Finally, the experimental results are compared to the analytical predictions of two different gear analysis programs.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1145-1150
• /
• 2008

In this paper, We studied efficient design of wireless transmission system for unified data transmission in a subway and railway. It is increased that need of broadband multimedia service to make useful environment for user and to support the operation of railway system. High bandwidth is better if we need more services. But, high bandwidth requires more cost at tunnel of subway. More bandwidth make receive sensitivity to bad. So it need more wireless Station. We deduced best bandwidth of subway wireless transmission system reflecting the cost of installation and efficiency of system. Consequently, we decide efficient service model of broadband wireless system at a subway. Subway broadband wireless transmission system is tested in this year, and it is to be extended to province subway. Cost of subway broadband wireless transmission system is saved, because the system can be efficiently designed. Therefore, the effectiveness is expected to be very big.

• Smart Media Journal
• /
• v.3 no.3
• /
• pp.9-14
• /
• 2014

The increasing number of ECUs in automobiles causes the CAN bus overloaded and consequently the error probability of data transmission increases. Since the time duration for the data transmission is proportional to CAN frame length, it is desirable to reduce the frame length. In this paper, we present a CAN message compression method using Data Length Code (DLC) and bit rearrangement. By simulations using actual CAN data, it is shown that the CAN transmission data is reduced up to 54 % by the proposed method, compared with conventional methods.

• Journal of information and communication convergence engineering
• /
• v.7 no.1
• /
• pp.41-45
• /
• 2009

In mobile GIS environments, a client needs to receive the isogram data with a topographical map from a server, if the mobile client wants to display map with elevation information. Because the elevation data size is normally quite large, the client will suffer some problems to receive the elevation data from server. The main reason is a resource limitation of the mobile devices. To overcome these problems, this paper proposes new data structures and algorithms. They are designed for efficient transmission of contour data to a client. Because of the contour data are generated as a vector style from elevation information stored at a server, the proposed algorithms are focused to minimize the transmission data volume and time.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.10
• /
• pp.21-29
• /
• 2013

This paper proposed the architecture of the authentication and the transmission for high reliable emergency data management based on U-healthcare wireless mesh networks. In U-healthcare monitoring service, the high reliable bio data management as well as the data transmission are required because the monitoring emergency bio data is related linked to life. More specifically, the technologies of the identity authentication of the measuring bio data, the personalized emergency status diagnosis who is authenticated the bio data and the emergency data transmission are important first of all. To do this, this paper presents the structure and protocol of the identity authentication management with using the extended IEEE 11073 PHD, the structure of policy-based management of the emergency bio data for the highly reliable management and the resilient routing protocol based on wireless mesh network for the reliable data transmission.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.4
• /
• pp.136-141
• /
• 2011

In this paper, we propose an approach to improve the data detection performance of the acoustic data transmission system based on the modulated complex lapped transform (MCLT). We first present an effective analysis of the features and the detection method of data in the acoustic data transmission system. And then feature vectors which are applied to the Gaussian mixture model (GMM) are selected from relevant parameters of the previous system for the efficient data detection. For the purpose of evaluating the performance of the proposed algorithm, Bit error rate (BER) of the received data was measured at different environments (music genres (rock, pop, classic, jazz) and different distances (1m∼5m) from the loudspeaker to the microphone in a office room) and yields better results compared with the conventional scheme of the acoustic data transmission system based on the MCLT.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.12 no.3
• /
• pp.75-85
• /
• 2016

MANET is a network composed only mobile network having limited resources and has dynamic topology characteristics. Therefore, every mobile node acts as a route and delivers data by using multi-hop method. In particular, group communication such as multicast is desperately needed because of characteristics such as battery life of limited wireless bandwidth and mobile nodes. However, the multicast technique can have different efficient of data transmission according to configuring method of a virtual topology by the movement of the nodes and the performance of a multicast can be significantly degraded. In this paper, the region based security multicast technique is proposed in order to increase the efficiency of data transmission by maintaining an optimal path and enhance the security features in data transmission. The group management node that manages the state information of the member nodes after the whole network is separated to area for efficient management of multicast member nodes is used. Member node encrypts using member key for secure data transmission and the security features are strengthened by sending the data after encrypted using group key in group management node. The superiority of the proposed technique in this paper was confirmed through experiments.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.2 no.1
• /
• pp.31-42
• /
• 2007

A transform coding scheme for the transmission of audio data in ZigBee based wireless personal area networks (WPAN) is presented in this paper. Here, wavelet transform is exploited to encode the features of audio data included mainly in the low frequency region. As a result, it is confirmed that the presented scheme recovers the original audio signals much accurately while it transmits the binary data compressed as 37.5% of the entire data generated without coding scheme. Especially, the mean-squared error between the recovered and original audio data approaches $10^{-4}$ when the signal-to-noise power ratio is sufficiently high. Hence, the presented coding scheme which exploits the wavelet transform is possibly applied for high-quality audio data transmission services in a small-scale sensor network based on ZigBee. Such a result is considered to be applicable as a basic material to update the technical specifications and develop the applications of ZigBee in WPANs.

• Proceedings of the KIEE Conference
• /
• 2003.07e
• /
• pp.62-69
• /
• 2003

In recent years, data transmission using power lines has been much highlighted. Power line is known to be cost-effective communication medium because the entire cable infrastructure has been already established and it is entirely connected with any home. Recently, the target of researches is to communicate data reliably over power lines at the speed of at least 1Mbits/s over the frequency range from 1MHz to 10MHz. OFDM communication system has been used for the high speed data transmission. Next, the conventional and adaptive OFDM systems for high speed data transmission over power line channel are investigated. The performance of AOFDM(adaptive OFDM) over the frequency selective channel with impulsive and narrow-band noise are studied to be a nice solution for high speed data transmission over power lines. The simulation results show that data the rates of the AOFDM are improved about 47% more than the ones of the conventional OFDM over the frequency response of case 4. In the results, the data rate has been much improved by the proposed adaptive algorithm in the frequency selective channel.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.3
• /
• pp.370-378
• /
• 2018

The mission data in missile systems should be quickly and reliably transmitted from a mission transmission device to a guidance control unit. The MIL-STD-1553B is one of the reliable communication standards, but its bit rate is generally limited to 1Mbps due to the intrinsic properties of its electrical design. Therefore, the bus controller needs to be optimized to efficiently transmit the mission data on the inevitably limited bit rate. This paper proposes an analytical approach based on sampling-based optimization methods to maximize the data throughput without data loss. The proposed approach was evaluated in the simulations with the data transmission model for the MIL-STD-1553B communication system. The results of the proposed methods were applied to a real-time system and showed that the proposed method was successfully performed.