• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.590-593
• /
• 2005

In this paper, it is analyzed a transmission time of ACL Packet in bluetooth wireless link. In order for segment to improve the transfer capability in bluetooth system, it is fragmented in TCP total messages that are coming down from upper layer and then the packets are sent one at time in baseband. And it is studied that transmission time for bluetooth wireless link according to DM1, DM3 or DM5 packet type in bluetooth piconet environment. From the results, we were able to obtain ACL packet transmission time, optimal TCP packet size and DM packet size.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.12
• /
• pp.1065-1075
• /
• 2012

For the purpose of providing high data rate real-time services, radio transmission technologies (RTT) for ship ad-hoc network (SANET) based on the Recommendation ITU-R 1842-1 are designed. Physical layer parameters of SANET are contrived to meet the requirements of the specification. In order to improve the link reliability for SANET, in this paper, we investigate the performance of the SANET with the multiple antennas, where receive combining (RC), transmit diversity (TD), and beamforming (BF) are employed, respectively. Based on the analysis of the packet error rate (PER) under the highly correlated maritime wireless channel model, we select the efficient multiple antenna schemes for SANET to improve the link reliability. In addition, the optimal MCS levels for the single-carrier (SC) SANET with the bandwidth of 25 kHz, and the multi-carrier (MC) SANET with the bandwidth of 50 kHz and 100 kHz are finalized.

• Journal of KIISE:Information Networking
• /
• v.31 no.2
• /
• pp.224-232
• /
• 2004

To guarantee the reliability in multicast transmission, researches providing reliability through hierarchical control tree which is independent on data channel tree are known to provide high scalability. However, the logical control tree in transport layer constructed without topology information of the corresponding network layer tree may inefficiently use the network resources because the logical control tree is not closely related to the tree topology of the network layer. A router assisted control tree mechanism presented in this paper would improve the efficiency of the link as well as it would remove the replicated data. In addition, it requires to a router a small change which examines the message type of the control tree.

• Journal of Advanced Navigation Technology
• /
• v.15 no.1
• /
• pp.54-60
• /
• 2011

The development of wireless sensor networks (WSN) can be motivated by several types of applications. However, these applications demand an energy-efficient WSN that can prolong the network lifetime and can provide high throughput, low latency and delay. Designing wireless sensor networks with the capability of prolonging network lifetime catch the attention of many researchers in wireless system and network field. Contrasts with Mobile Ad Hoc Network system, Wireless Sensor Networks designs focused more on survivability of each node in the network instead of maximizing data throughput or minimizing end-to-end delay. In this paper, we will study part of data link layer in Open Systems Interconnection (OSI) model, called medium access control (MAC) layer. Since the MAC development of energy aware MAC Protocol for wireless sensor layer controls the physical radio part, it has a large impact on the overall energy consumption and the lifetime of a node. This paper proposes a analytical approach that tries to reduce idle energy consumption, and shows the increasement of network end-to-end arrival rate due to efficiency in energy consumption from time slot management.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.10
• /
• pp.882-890
• /
• 2001

The data link layer of Foundation Fieldbus is operated on the basis of scheduling and token-passing disciplines. This paper presents a network design method of Foundation Fieldbus using a bandwidth allocation scheme. Fieldbus traffic consists of periodic data and sporadically generated time-critical and time-available data. The bandwidth allocation scheme schedules the transmission of periodic data. Time-critical and time-available data are transmitted via a token-passing service. The validity of this bandwidth allocation scheme is determined using an experimental model of a network system. The results obtained from the experimental model show that the proposed scheme restricts the delay of both periodic and time-critical data to a pre-specified bound. The proposed bandwidth allocation scheme also fully utilizes the bandwidth resource of the network system.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.7
• /
• pp.26-40
• /
• 2010

We propose a new routing protocol, MCQosR, that is based on bandwidth estimation, admission control, and a routing metric, MCCR - suitable for wireless ad-hoc networks with multiple radios and channels. To use the full capacity of a wireless link, we assume a node with multiple radios for full duplex operation, and a radio using multiple channels to exclude route-intra interference. This makes it possible to use the capacity of a wireless link. Then, to provide bandwidth and delay guarantee, we have a radio with a fixed channel for layer-3 data reception at each node, used to estimate the available bandwidth and expected delay of a wireless link. Based on the estimate of available bandwidth and delay, we apply the call admission control to a new call requiring bandwidth and delay guarantee. New calls with traffic that will overflow link or network capacity are rejected so the accepted calls can use the required bandwidth and delay. Finally, we propose a routing metric, MCCR, which considers the channel contentions and collisions of a wireless link operating in CSMA/CA. MCCR is useful for finding a route with less traffic and distributing traffic over the network to prevent network congestion as much as possible. The simulation of the MCQosR protocol and the MCCR metric shows traffic is distributed and guaranteed service is provided for accepted calls.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.1
• /
• pp.211-220
• /
• 2018

The standard data link layer encryption provided by CCSDS has a structure that encodes HDLC frame into it using an AES algorithm. However, CCSDS is standard method has a structure in which the receiving side cannot request a re-activation when noise interference occurs over an unstable channel. SES Alarmed has a structure that enables the receiving side to additionally detect errors and perform re-activation requests in an operational structure similar to that of link encryption in CCSDS. The SES Alarmed related paper was intended to identify the optimum range of thresholds and identify data corruption due to channel noise. In this paper, the focus was on reducing the re-activation process if the HDLC frame, excluding the password Sync code, consistently exceeds any threshold levels. The HDLC frame order was changed and the results of using SES Alarmed were proposed and compared.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.11
• /
• pp.943-954
• /
• 2000

Fieldbus is the lowest level industrial network in the communication hierarchy of factory automation and distributed process control systems. Data generated from field devices are largely divided into three categories : time-critical, periodic and time-available data. Because these data share one fieldbus medium, it needs a method that allocates these data to the bandwidth-limited fieldbus medium. This paper introduces an implementation method of bandwidth allocation scheme on PROFIBUS. In order to implement bandwidth allocation scheme on PROFIBUS, the following functions need to be supplemented on the FDL(Fieldbus Datalink Layer) protocol: (i) separation of medium bandwidth into periodic and non-periodic intervals, (ii) synchronization of node timers over a local link. In order to examine the validity of bandwidth allocation scheme on PROFIBUS, this paper develops an experimental model of a network system. The results obtained from the experimental model show that the bandwidth allocation scheme satisfies the performance requirement of time-critical, periodic and time-available data.

• Proceedings of the IEEK Conference
• /
• 2002.06c
• /
• pp.47-50
• /
• 2002

In this paper, the efficient transmission technique of real time video data over 3G wireless networks is presented. To understand the transmission characteristic of 3G networks on real time video data, we implemented the data transport structure of 3G wireless networks. Also this research is based on current 3G wireless network specification of 3GPP, 3GPP2 standard organization to evaluate the result over real 3G wireless network environment. The retransmission by radio link layer results in the delay factor. To implement video data transmission efficiently, we Propose to use both no-retransmission and forward error correction method.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.6
• /
• pp.103-113
• /
• 1985

This is the first part of the four-part paper describing the development of a packet-switched computer network named the KORNET In this paper, we present the overview of the KORNET, and discuss various aspects on the development of the netwo management center (NMC). The NMC acts as a nerve center of the network, performing such functions as network monitoring, subscriber and network management and routing manage-ment using operator dialogues. In the implementation of the NMC, we have developed various application softwares that include operator interface, primary/srcondary pan, session layer and packet level adaptor. As for packet, link and physical level protocols, we have modified the XODIAC X.25 originally developed by Data General, Inc. All the net-work protocols we have developed comply completely with the CCITT recommendations.