• Journal of Information Processing Systems
• /
• v.2 no.1
• /
• pp.39-43
• /
• 2006

In this paper, we proposed TASL-MAC, a medium-access control (MAC) protocol for wireless sensor networks. In wireless sensor networks, sensor nodes are usually deployed in a special environment, are assigned with long-term work, and are supported by a limited battery. As such, reducing the energy consumption becomes the primary concern with regard to wireless sensor networks. At the same time, reducing the latency in multi-hop data transmission is also very important. In the existing research, sensor nodes are expected to be switched to the sleep mode in order to reduce energy consumption. However, the existing proposals tended to assign the sensors with a fixed Sleep/Listening schedule, which causes unnecessary idle listening problems and conspicuous transmission latency due to the diversity of the traffic-load in the network. TASL-MAC is designed to dynamically adjust the duty listening time based on traffic load. This protocol enables the node with a proper data transfer rate to satisfy the application's requirements. Meanwhile, it can lead to much greater power efficiency by prolonging the nodes' sleeping time when the traffic. We evaluate our implementation of TASL-MAC in NS-2. The evaluation result indicates that our proposal could explicitly reduce packet delivery latency, and that it could also significantly prolong the lifetime of the entire network when traffic is low.

• 제어로봇시스템학회:학술대회논문집
• /
• 1994.10a
• /
• pp.1.1-5
• /
• 1994

In the single sweep record of event-related potential (ERP), the peak latency of P300, which is one of the most prominent positive peaks in the ERP record, might fluctuate according to the recording conditions. The fluctuation of the peak latency (measurement fluctuation) is the summation of the fluctuation caused by physiological factor (physiological fluctuation) and one by noise of background EEG (noise fluctuation). We propsed a method for estimating the interval of the physiological fluctuation based on a limited number of single sweep records. The noise fluctuation was estimated by using the relationship between the signal-to-noise (SN) ratio and the noise fluctuation based on the P300 model and the background EEG model. The interval estimate of the physiological fluctuation were obtained by subtracting the interval estimate of the noise fluctuation from that of the measurement fluctuation. The proposed method was tested by using simulation data of ERP and applied to actual ERP and data of normal subjects, and gave satisfactory results.

• Journal of Communications and Networks
• /
• v.13 no.6
• /
• pp.583-590
• /
• 2011

Full-mesh IPSec tunnels pass through a black ("unsecure") network (B-NET) to any red ("secure") networks (RNETs). These are needed in military environments, because they enable dynamically changing R-NETs to be reached from a BNET. A dynamically reconfiguring security policy database (SPD) is very difficult to manage, since the R-NETs are mobile. This paper proposes advertisement process technologies in association with the tunnel gateway's protocol that sends 'hello' and 'prefix advertisement (ADV)' packets periodically to a multicast IP address to solve mobility and security issues. We focus on the tunnel gateway's security policy (SP) adaptation protocol that enables R-NETs to adapt to mobile environments and allows them to renew services rapidly soon after their redeployment. The prefix ADV process enables tunnel gateways to gather information associated with the dynamic changes of prefixes and the tunnel gateway's status (that is, 'down'/restart). Finally, we observe two different types of performance results. First, we explore the effects of different levels of R-NET movements on SP adaptation latency. Next, we derive the other SP adaptation latency. This can suffer from dynamic deployments of tunnel gateways, during which the protocol data traffic associated with the prefix ADV protocol data unit is expected to be severe, especially when a certain tunnel gateway restarts.

• International Journal of Internet, Broadcasting and Communication
• /
• v.14 no.3
• /
• pp.276-284
• /
• 2022

In this paper, we implemented cloud rendering using WebRTC for high-quality AR and VR services. Cloud rendering is an applied technology of cloud computing. It efficiently handles the rendering of large volumes of 3D content. The conventional VR and AR service is a method of downloading 3D content. The download time is delayed as the 3D content capacity increases. Cloud rendering is a streaming method according to the user's point of view. Therefore, stable service is possible regardless of the 3D content capacity. In this paper, we implemented cloud rendering using WebRTC and analyzed its performance. We compared latency of 100MB, 300MB, and 500MB 3D AR content in 100Mbps and 300Mbps internet environments. As a result of the analysis, cloud rendering showed stable latency regardless of data volume. On the other hand, the conventional method showed an increase in latency as the data volume increased. The results of this paper quantitatively evaluate the stability of cloud rendering. This is expected to contribute to high-quality VR and AR services

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.141-145
• /
• 2014

A minimally appropriate time delay of audio data processing is investigated for rendering virtual sound source direction in real-time head-tracking environment under headphone listening. Less than 3.7 degree of angular mismatch should be maintained in order to keep desired sound source directions in virtually fixed while listeners are rotating their head in a horizontal plane. The angular mismatch is proportional to speed of head rotation and data processing delay. For 20 degree/s head rotation, which is a relatively slow head-movement case, less than total of 63ms data processing delay should be considered.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.75-78
• /
• 2007

Mobile IP provides hand-held devices with mobility which allows the user to do work over the network. However, handover time due transfer between access routers causes network delays and data loss. L2Trigger Handover expects this handover to take place, and executes L3 handover before L2 handover takes place, thereby reducing overall handover latency, although it still is an issue since handover latency between AR is not completely eliminated in L2 trigger handover. In this paper took into consideration where MIH is used in MIPv4 and using MIH Table when handover is about to occur in MN(Mobile Node), thereby pre-fetching data needed by Handover. In this way, when the handover is estimated, it improves the init time that L2trigger had. Furthermore we can find that we can execute the handover with shorten init time in smaller and narrow overlap length

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.6
• /
• pp.751-758
• /
• 2020

As the application fields using various types of communication, including the Internet of Things, have emerged, the form of communication has been diversified. Some applications require fast feedback and the others continue to send data regardless of whether it is received or not. Transmitting data in one way can be acknowledged by the opposite direction response. These information exchanges form a two-way communication. For applications that need to issue commands remotely, such as network control systems, it is important to give a fast response because the sender decides the next action based on the response from the recipient. In this paper, we propose the base station (BS) cooperation to improve the latency performance of the two-way communication in cellular networks. We design the two-way communication strategy utilizing cooperating BSs with the same direction of traffic as well as bidirectional traffic. We show that the proposed scheme improves the latency performance than the previous works.

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.1096-1099
• /
• 2019

In this paper, we propose the protocol for construction of smart factory. The proposed protocol for construction of smart factory consists of an OPC UA Server/Client, a technology of TSN realtime communication, a NTP & PTP time synchronization protocol, a FieldBus protocol and conversion module, a technology of saving data for data transmit latency and synchronization protocol. OPC UA server/client is a system integration protocol which makes interface industrial hardware device and supports standardization which allows in all around area and also in not independent from any platform. A technology of TSN realtime communication provides an high sensitive time management and control technology in a way of sharing specific time between devices in the field of high speed network. NTP & PTP time synchronization protocol supports IEEE1588 standardization. A fieldbus protocol and conversion module provide an extendable connectivity by converting industrial protocol to OPC. A technology of saving data for data transmit latency and synchronization protocol provide a resolution function for a loss and latency of data. Results from testing agencies to assess the performance of proposed protocol for construction of smart factory, response time was 0.1367ms, synchronization time was 0.404ms, quantity of concurrent access was 100ea, quantity of interacting protocol was 5ea, data saving and synchronization was 1,000 nodes. It produced the same result as the world's highest level.

• ETRI Journal
• /
• v.39 no.1
• /
• pp.41-50
• /
• 2017

In connection-oriented data transport services, data loss can occur when a service experiences a problem in its end-to-end path. To resolve the problem promptly, the data transport systems providing the service must quickly modify their internal configurations, which are distributed among different locations within each system. The configurations are modified through a series of problem (event) handling procedures, which are carried out by multiple control processors in the system. This paper proposes a provisioning-to-signaling method for inter-control-processor messaging to improve the time efficiency of event processing. This method simplifies the sharing of the runtime event, and minimizes the time variability caused by the amount of event data, which results in a decrease in the latency time and an increase in the time determinacy when processing global events. The proposed method was tested for an event that required 4,000 internal path changes, and was found to lessen the latency time of global event processing by about 50% compared with the time required for general methods to do the same; in addition, it reduced the impact of the event data on the event processing time to about 30%.

• KIISE Transactions on Computing Practices
• /
• v.22 no.10
• /
• pp.497-503
• /
• 2016

Emerging next-generation storage technologies such as non-volatile memory will help eliminate almost all of the storage latency that has plagued previous storage devices. In conventional storage systems, the latency of slow storage devices dominates access latency; hence, software efficiency is not critical. With low-latency storage, software costs can quickly dominate memory latency. Hence, researchers have proposed the memory mapped file I/O to avoid the software overhead. Mapping a file into the user memory space enables users to access the file directly. Therefore, it is possible to avoid the complicated I/O stack. This minimizes the number of user/kernel mode switchings. In addition, there is no data copy between kernel and user areas. Despite of the benefits in the memory mapped file I/O, its overhead still needs to be addressed, as the existing mechanism for the memory mapped file I/O is designed for slow block devices. In this paper, we identify the overheads of the memory mapped file I/O via experiments.