• 한국수산과학회지
• /
• 제12권1호
• /
• pp.13-18
• /
• 1979

Volumetric efficiency is a determining factor for tile measurement of compessor capacity, but it is practically hard to take an accurate measurement of capacity characteritics so that most of users trust the data of makers catalogue. We often realized the discrepancy in their data with actual capacity. This study was attemped to establish the basic data of capacity characteristics of compressor by measuring volumetric efficiency of high speed multi-cylinder compressor and rotary compressor. The volumetric efficiency was calculated based on the quantity of the flow of ammonia vapor and pressure difference in suction state of orifice plate and compressor. The volumetric efficiency of high speed multi-cylinder compressor was $37-61\%$ and that of rotary compressor was $57-82\%$ when compression ratio was in the range of 4-12. The discrepancy in volumetric efficiency at an equal evaporating temperature between the makers catalogue and the measured data was $5.5\%$.

• 한국통신학회논문지
• /
• 제34권12A호
• /
• pp.1006-1013
• /
• 2009

본 논문에서는 블록 대각화 기법을 사용하는 다중 사용자 MIMO (Multiple-Input Multiple-Output) 하향링크 채널 환경에서 모든 사용자의 성능을 동일하게 보장하기 위하여 데이터 스트림의 수를 할당하는 기법을 제안한다. 기존의 연구들은 전체 채널 용량의 최대화에 중점을 두고 있고, 각 사용자의 채널 환경에 따라서 채널 용량이 불균등하게 분배되어 사용자 간의 차이가 크다. 뿐만 아니라, water-filling 기법을 사용하여 전력을 제어함으로써, 채널 이득이 작은 사용자는 매우 작은 채널 용량만을 가질 수 있었다. 또한, 대부분의 연구에서는 모든 사용자에 대해 동일한 수의 데이터 스트림을 사용함으로써, 스스로 데이터 스트림의 분배에 의한 추가적인 이득을 제한했다. 본 논문에서는 사용자 채널의 크기에 따라 데이터 스트림을 분배하여 모든 사용자에게 균등한 채널 용량을 보장하는 조건에서 이를 최대화하는 기법을 제안하고 모의실험을 통하여 제안된 기법이 기존의 기법에 비해 송신전력과 채널 용량의 이득이 더 큰 것을 확인한다.

• 방송공학회논문지
• /
• 제12권2호
• /
• pp.112-119
• /
• 2007

Reversible data embedding theory has marked a new epoch for data hiding and information security. Being reversible, the original data and the embedded data as well should be completely restored. Difference expansion transform is a remarkable breakthrough in reversible data hiding scheme. The difference expansion method achieves high embedding capacity and keeps the distortion low. This paper shows that the difference expansion method with simplified location map, and new expandability and changeability can achieve more embedding capacity while keeping the distortion almost the same as the original expansion method.

• 한국ITS학회:학술대회논문집
• /
• 한국ITS학회 2010년도 춘계학술대회
• /
• pp.5-9
• /
• 2010

• Journal of Communications and Networks
• /
• 제11권3호
• /
• pp.271-278
• /
• 2009

A new modulation scheme called multicoded-pulse position modulation (MC-PPM) is proposed for an ultrawideband (UWB) impulse radio communication system. The multicoded signal is generated by using several orthogonal codes for transmitting data simultaneously. Then, each multi-level value of the multicoded signal is converted to pulse position which results in not only an improved data rate, but also a processing gain in reception, delivering the power-efficient benefit of PPM and guaranteeing the low pulse energy for UWB systems. We notice that the modulation of multi-level values of the multicoded signal to pulse position is more efficient in terms of achievable data rate than the modulation of transmitting data based on other PPM schemes within given bandwidth and pulse energy. Therefore, as a performance measure, we focus on the achievable data rate (link capacity) of the proposed scheme and analyze it theoretically. Through simulation, we compare the link capacity of the MC-PPM scheme and other PPM schemes, such as M -ary PPM and multiple PPM. With the fixed bandwidth and same pulse energy condition, the UWB system based on the proposed MC-PPM scheme shows good link capacity and an increased data rate as L increases, which is contrary to other PPM schemes.

• Journal of Information Technology Applications and Management
• /
• 제31권2호
• /
• pp.15-34
• /
• 2024

This study aims to analyze the effect of absorptive capacity on technology collaboration performance and the moderating effect of innovation intermediaries. We set absorptive capacity (potential, realized) as independent variables and technology collaboration performance (relative technology level, development period, cost savings, new product development, collaboration satisfaction) as dependent variables, with innovation intermediaries as a moderating variable. We conducted a survey of 145 ICT companies that experienced technology collaboration and analyzed the data using 101 valid responses. The results show that potential absorptive capacity has a significant effect on new product development and collaboration satisfaction, while realized absorptive capacity has a significant effect on relative technology level, cost savings, and new product development. Furthermore, innovation intermediaries have a moderating effect between realized absorptive capacity and new product development. The contribution of this study to academia and industry is that it highlights absorptive capacity as a key factor influencing technology collaboration performance. The limitations of this study include the lack of accurate measurement of absorptive capacity and innovation intermediaries, as well as a lack of control over external factors. These limitations should be addressed through more in-depth research by systematically defining and measuring them in future follow-up studies.

• 경영과학
• /
• 제29권3호
• /
• pp.169-182
• /
• 2012

This study examines the co-evolutionary process between open innovation and firms' absorptive capacity. The effects of open innovation can be maximized through the capacity to absorb the knowledge from the external sources such as universities, government-support research institute, and private R&D centers. This study used data of STEPI technology innovation survey conducted at 2002, 2005, and 2008 (3 points measures). The data were analyzed through a structural equation model. Results suggest that open innovation at t0 point influences positively the absorptive capacity at t1 point, which subsequently enhances the intention of open innovation at t2 point. This result suggests the existence of co-evolutionary process between open innovation and firms' absorptive capacity. When knowledge comes from universities, the co-evolution has sustained; whereas when knowledge comes from private firms' R&D centers, the co-evolution has not effected. Theoretical and practical implications are discussed.

• 설비공학논문집
• /
• 제29권9호
• /
• pp.463-471
• /
• 2017

According to the Korea industrial standard of air conditioning systems (KS C 9306), cooling and heating loads for buildings can be calculated by using maximum and minimum temperature in BIN data. Cooling and heating loads can be determined by building set temperature and ambient temperature. Cooling and heating system capacity of buildings can be normally designed according to determined heating and cooling loads. Cooling and heating system capacity can be reduced by updated BIN data, applying TAC (Technical Advisory Committee) values. In this study, updated BIN data have been analyzed using ambient temperature of 19 areas in Korea for the last 10 years (2005~2014) provided by KMA (Korea Meteorological Administration). Building cooling and heating loads have been calculated following TAC based BIN data. As a result, designed system capacity decreased depending on applying TAC. Those were reduced as 7.1% ($100m^2$ building), 8.7% ($1,000m^2$ building) in cooling capacity, 11.7% in heating capacity when TAC 2.5% applied. And also, it is expected system initial and operating cost by decreasing system capacity.

• 한국환경과학회지
• /
• 제11권12호
• /
• pp.1217-1226
• /
• 2002

This study aims at the effective estimation of water supply capacity of small scale reservoir and the proposal of the data which is necessary to establish the water resources management plan of down stream area of the reservoir in the future by comparison and examination about reservoir operation technique for the security of agricultural water in small scale reservoir. The result of flow calculation by Tank model is used for the input data as the inflow data which is needed for the analysis of water supply capacity. Stochastic method, simulation method, and optimization method are used to examine the water supply capacity, and water security amount is compared with each method. From the analyses of water supply capacities by each method, slightly different results are shown in spite of the effort to compare them equally using input data such as inflow data under equal conditions, and the comparison of water supply capacities by each method are as follows; linear planning method, simulation method, and transition probability matrix method in the order of amount from the largest. It is thought that the simulation method in which comparatively reasonable application of the inflow data is possible and is simulated in successive time series dam operation of the three methods used in this study thus, simulation model is proper to estimate the water supply capacity of agricultural small scale reservoir. And it is judged that the heightening of efficiency of water resources utilization according to the development of downstream area of dam may be possible using the upward readjusted water supply amount of $55.18{\tiems}10^6ton$ and $63.7{\times}10^6ton$ at 95% and 90% supply reliability respectively which are above the planning water supply amount of $50.0{\times}10^6$ton when the simulation method is introduced as the standard.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권3호
• /
• pp.600-612
• /
• 2013

In 2006, Zhang and Wang proposed a data hiding scheme based on Exploiting Modification Direction (EMD) to increase data hiding capacity. The major benefit of EMD is providing embedding capacity greater than 1 bit per pixel. Since then, many EMD-type data hiding schemes have been proposed. However, a serious disadvantage common to these approaches is that the embedded data is compromised when the embedding function is disclosed. Our proposed secure data hiding scheme remedies this disclosure shortcoming by employing an additional modulus function. The provided security analysis of our scheme demonstrates that attackers cannot get the secret information from the stegoimage even if the embedding function is made public. Furthermore, our proposed scheme also gives a simple solution to the overflow/underflow problem and maintains high embedding capacity and good stegoimage quality.