• Journal of the Korea Institute of Military Science and Technology
• /
• v.6 no.3
• /
• pp.15-21
• /
• 2003

This paper contains a precise calibration technique for the position of seabed acoustic target and theoretical error analysis of calibration results. The target is deployed on seabed as a standalone transponder. The purpose of target is performing accuracy test for active sonar as well as position calibration itself. For the position calibration, relative range between target and test vessel should be measured using target's transponder function. The relative range data combined with vessel position can be converted into a estimated position of target by the application of nonlinear LSE method. The error analysis of position calibration was divided into two stages. One is for relative range estimator and the other for target position estimator. Numerical simulations for position calibration showed good matching between results and developed CRLB.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.12
• /
• pp.1001-1008
• /
• 2001

This paper presents a new camera calibration algorithm for ill-conditioned cases in which the camera plane is nearly parallel to a set of non-coplanar calibration boards. for the ill-conditioned case, most of existing calibration approaches such as Tsais radial-alignment-constraint method cannot be applied. Recently, for the ill-conditioned coplanar calibration Lee&Lee[16] proposed an iterative algorithm based on the least square method. The non-coplanar calibration algorithm presented in this paper is an iterative two-stage procedure with extends the previous coplanar calibration algorithm. Through the first stage, camera, position and orientation parameters as well as one radial distortion factor are determined optimally for a given data of the scale factor and the focal length. In the second stage, the scale factor and the focal length are locally optimized. This process is repeated until any improvement cannot be expected any more Computational results are provided to show the performance of the algorithm developed.

• Journal of the Korean Society of Radiology
• /
• v.1 no.2
• /
• pp.31-35
• /
• 2007

Energy calibration is important to identify accurate neutron capture resonance energy in the neutron TOF (Time-of-Flight) experiment. In present study, the accurate neutron capture resonance energies of natural Sm were measured by using a 46-MeV electron linear accelerator (linac) at the Research Reactor Institute, Kyoto University(KURRI). The BGO spectrometer were adopted for measurement the prompt capture gamma-ray of the sample. To obtain energy calibration curve, resonance energy of a gold sample used as standard resonance energy Mughabghab's data (From neutron resonance parameters data). Previous data (by Mughabghab) of natural Sm sample have been compared with the present result.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2002.05a
• /
• pp.248-252
• /
• 2002

Many sensors such as a structured grid pattern generator, a laser, and CCD camera to information have been used, but most of algorithms for a calibration are inefficient memory and experiment data are required. In this paper, the calibration algorithm of a structured grid pattern based on triang is introduced to calculate 3D information in the real world. The beams generated from str pattern generator established horizontally with the CCD camera are projected on the calibn CCD camera observes the intersection plane of a light and an object plane. The 3D infon calculated using observed and calibration data. This proposed method in this paper has advantages such as a memory saving and an experimental data since the 3D information are obtained simply triangulation method.

• The Korean Journal of Applied Statistics
• /
• v.6 no.2
• /
• pp.227-235
• /
• 1993

Calibration relates the estimation of independent variable which rquires more effort or expense than dependent variable does. It would be provided with high accuracy because a little change of the result of independent variable cn cause a serious effect to the human being. Usual statistical analysis assumes the normality of error distribution or linearity of data. It is desirable to analyze the data without those assumptions for the accuracy of the calibration. In this paper, we calibrated the data nonparametrically without those assumptions and derived confidence interval estimate for the independent variable. As a method, we used kernel method which is popular in modern statistical branch. We derived bootstrap confidence interval estimate from the bootstrap confidence band.

• Journal of Sensor Science and Technology
• /
• v.32 no.6
• /
• pp.475-480
• /
• 2023

When modeling a sensor system mathematically, we assume that the sensor noise is Gaussian and white to simplify the model. If this assumption fails, the performance of the sensor model-based controller or estimator degrades due to incorrect modeling. In practice, non-Gaussian or non-white noise sources often arise in many digital sensor systems. Additionally, the noise parameters of the sensor model are not known in advance without additional noise statistical information. Moreover, disturbances or high nonlinearities often cause unknown sensor modeling errors. To estimate the uncertain noise and model parameters of a sensor system, this paper proposes an iterative batch calibration method using data-driven machine learning. Our simulation results validate the calibration performance of the proposed approach.

• Korean Journal of Remote Sensing
• /
• v.27 no.4
• /
• pp.495-506
• /
• 2011

COMS In-Orbit Tests(IOT), performed from July, 2010 to Jan, 2011, were successfully completed and the scientific data from MI and GOCI has been distributed officially from April, 2011. This paper focuses on the geometric calibration system tests conducted during the IOT. The geometric calibration process, which is one of the primary objectives of the IOT is the final step of COMS data pre-processing. The basic principles of the geometric calibration (or image navigation and registration, INR) algorithm for COMS are described and the functional and performance tests of COMS INR system were summarized according to the COMS IOT phases. Final performance testes were carried out using data sets acquired from the real-time COMS data pre-processing system. Geometric calibration accuracy of the COMS data showed excellent quality and met requirement specifications.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1679-1683
• /
• 1997

In this paper a linear Kalman filter for calibration of gimballed inertial navigation system(GINS) is designed and its performace is analyzed through the simulation with a real navigation data. Simulation results show that the proposed Kalman filter gives a good performance to calibrate the sensor errors.

• Journal of the Korean Society for Precision Engineering
• /
• v.4 no.4
• /
• pp.36-42
• /
• 1987

Very accurate calibration is needed to index tables which are necessary for precision angle measurement. The repeatability of index table is less than 0.2 second, so that attentions should be paid to choosing devices to be used in the calibration of index tables. The auto- collimators have been used in the calibration of index tables, but the repeatability of auto- collimators is bad compared with that of index table. In place of autocollimators, we described a method which uses electric comparators which are possessed by most precision measurement laboratories. Electric comparators are set to measure small angle displacement without interrupting the rotation of index tables and the signals of two electric comparators are added to remove the run-out errors of the shafts of index tables. Two index tables have been calibrated simulataneously by this method and the measurement data have been analyzed by the least squares method. We compare the calibration results with those of methods using autocollimator and auto- matic autocollimator and are able to know that the data of electric comparator method lie between the data of autocollimator methods. The repeatability of measurement is less than 0.02 second. The electric comparator method is economical and capable of reducing the uncertainty of the measurement.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.05a
• /
• pp.168-173
• /
• 1999

Many sensors such as a laser, CCD camera to obtain 3D information have been used, but most of calibration algorithms are inefficient since a huge memory and an experiment data for laser calibration are required. In this paper, the calibration algorithm of a slit beam laser based on triangulation method is introduced to calculate 3D information in the real world. The laser beam orthogonally mounted on the XY table is projected on the floor. A Cm camera observes the intersection plane of a light and an object plane. The 3D information is calculated using observed and calibration data. This method saves a memory and an experimental data since the 3D information are obtained simply triangulation method.