• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2005년도 동계학술연구발표회 및 2차 아시안포럼
• /
• pp.52-53
• /
• 2005

• 한국실내디자인학회논문집
• /
• 제20권1호
• /
• pp.138-145
• /
• 2011

This study analyzed the time to understand the space and the contents of information to be memorized in the indoor space. Understanding the space and examining the memory will not only provide the basic data on which visual activities occur in user's perceiving the designed space but also expand the activity range of interior designer. The summary of the study results is as follows: First, with respect to gender difference, the results showed that males grasped the space in a relatively shorter time. Females showed more concentrated distribution range than males. Second, as for the proper time by accumulative sum across time, the results showed that it increased continuously until V time zone(120~150 seconds), it decreased rapidly after the V zone, which indicated that the proper gazing time for the indoor space as the target of this study is less than 150 seconds(effective gazing time). Third, in terms of efficiency of information acquisition, the results suggested that "60~90 seconds" are the effective time for acquiring the greatest amount of information. Fourth, regarding the information acquisition method, males were approximately 4.1%~0.1% lower in the evaluation through phrase and image. The evaluation of subjects through phrase than image was connected to more accurate information acquisition.

• 비파괴검사학회지
• /
• 제31권5호
• /
• pp.552-559
• /
• 2011

전자기유도(electromagnetic induction) 현상을 이용한 비파괴진단기법으로서 최근까지 와전류탐상기법, 교류장측정기법, 자속누설검사기법, 그리고 원격장검사기법 등이 개발되어 활용되고 있다. 이 기법 중 와전류탐상기법은 오늘날 발전설비, 화학, 조선 및 군수설비 등의 열교환기 전열관 비파괴검사에 널리 적용되고 있다. 와전류탐상검사 시스템의 구성은 기능별로 와전류신호 합성 모듈, 아날로그 모듈, 디지털 신호처리를 위한 아날로그-디지털 변환 모듈, 전원공급장치 및 신호취득 평가 프로그램 등으로 구성되며, 선행 연구(I)에서는 다중채널방식의 와전류탐상검사 시스템의 구성 요소 중 1차로 와전류신호 합성 모듈, 아날로그 모듈을 설계 개발하였으며, 2차로 와전류 신호 취득 평가 프로그램을 개발하였다. 2차 연구에서 개발한 와전류 신호취득 평가 프로그램의 운영체제는 "Windows 7"로서 국내 사용자를 위해 최적화 하였으며, 주요 특징은 검사자가 "setup wizard"를 이용하여 검사에 필요한 검사 조건 및 변수를 용이하게 설정하고 이를 이용하여 신호취득 및 평가를 수행할 수 있다. 본 논문에서는 개발된 와전류신호 수집 및 평가 프로그램의 구성과 각 기능을 설명하고자 한다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제16권1호
• /
• pp.23-26
• /
• 2014

This paper represents the detection method of voltage disturbance for high temperature superconducting (HTS) tape using electromagnetically coupled coils. In order to detect the voltage as the superconductor transits from the superconducting state to the normal conduction state, voltage taps are widely used to get the voltage signal. And voltage taps are connected to data acquisition device via signal wires. However this new suggested method can detect the superconducting transition voltage without signal wires between voltage taps and data acquisition device by using electromagnetically coupled coils. This system consists of two electromagnetically coupled coils, the first coil to detect and transmit the voltage of HTS tape and the second coil to pick up the transmitted voltage from the first coil. By using this new suggested method, we can build the 'separated voltage-detection system'. HTS tape and first coil are located under liquid nitrogen vessel and the second coil is located under room temperature condition. In this paper, experiments are performed to verify the feasibility of the proposed method. As the result of the experiment, the separated voltage-detection system using electromagnetically coupled coils can successfully observe superconducting-normal transition of HTS tapes.

• Investigative Magnetic Resonance Imaging
• /
• 제25권3호
• /
• pp.141-155
• /
• 2021

Purpose: To develop a 3D magnetic resonance fingerprinting (MRF) method for application in high resolution knee cartilage PD, T₁, T₂ mapping. Materials and Methods: A novel 3D acquisition trajectory with golden-angle rotating radial in k_xy direction and interleaved echo planar imaging (EPI) acquisition in the k_z direction was implemented in the MRF framework. A centric order was applied to the interleaved EPI acquisition to reduce Nyquist ghosting artifact due to field inhomogeneity. For the reconstruction, singular value decomposition (SVD) compression method was used to accelerate reconstruction time and conjugate gradient sensitivity-encoding (CG-SENSE) was performed to overcome low SNR of the high resolution data. Phantom experiments were performed to verify the proposed method. In vivo experiments were performed on 6 healthy volunteers and 2 early osteoarthritis (OA) patients. Results: In the phantom experiments, the T₁ and T₂ values of the proposed method were in good agreement with the spin-echo references. The results from the in vivo scans showed high quality proton density (PD), T₁, T₂ map with EPI echo train length (N_ETL = 4), acceleration factor in through plane (R_z = 5), and number of radial spokes (N_spk = 4). In patients, high T₂ values (50-60 ms) were seen in all transverse, sagittal, and coronal views and the damaged cartilage regions were in agreement with the hyper-intensity regions shown on conventional turbo spin-echo (TSE) images. Conclusion: The proposed 3D MRF method can acquire high resolution (0.5 mm³) quantitative maps in practical scan time (~ 7 min and 10 sec) with full coverage of the knee (FOV: 160 × 160 × 120 mm³).

• 한국시뮬레이션학회논문지
• /
• 제32권1호
• /
• pp.45-54
• /
• 2023

전투 모의 환경 하에서 실제 모의 대상의 탐지 성능 데이터를 모의 개체에 적절히 입력하는 것은 모의분석 결과에 큰 영향을 미친다. 주요 전투 시뮬레이션 도구에서 개체의 탐지 능력을 모의하기 위한 표적획득모델로 ACQUIRE-Target Task Performance Metric(TTPM)-Target Angular Size(TAS) 모델을 사용하며, 이 모델은 전투 개체의 조우 조건을 입력으로 받아 해당 개체 센서의 분해 곡선을 추정하고, 표적 유형에 따른 탐지 거리를 출력한다. 그런데 사용자가 입력을 원하는 새로운 탐지 개체의 성능을 표적획득모델에 적용하는 것은 쉽지 않다. 사용자는 탐지 거리를 표적획득모델에 입력하길 원하지만, 표적획득모델은 조우 조건에 따른 센서의 분해 곡선 데이터가 필요하기 때문이다. 본 논문에서는 표적에 대한 탐지 거리를 입력으로 하여 표적획득모델의 센서 분해 곡선 데이터를 역으로 도출하는 기법을 제안한다. 여기서 해당 센서 분해 곡선 데이터는 인원, 지상차량, 항공기의 3종류 표적 유형에 대한 각각의 탐지 거리를 동시에 만족한다. 마지막으로 여러 정찰 장비의 탐지 거리를 탐지 개체에 적용하여, 정찰 장비에 따른 탐지 효과도를 분석한다.

• 수산해양기술연구
• /
• 제22권1호
• /
• pp.34-40
• /
• 1986

This paper deals with a new bit conversion method. When 12 bit AID converter is adapted to 16 bit micro-computer, complicated data aquisition method is not necessary to acquire the AID converted data into memory of computer. However, when the 12 bit AID converter is adapted to the 8 bit micro-computer 12 bit data should be divided into 4 bit data and 8 bit data. Therefore the old data-dividing method made 4 bitl2byte of memory space wasted. On the contrary, using the new bit conversion method suggested in this paper the two of 12 bit data are converted into 3 byte of data without extending the AID conversion time.

• 한국통신학회논문지
• /
• 제7권2호
• /
• pp.66-70
• /
• 1982

多數의 마이크로프로세서와 이를 연결해 주는 미니컴퓨터로 構成된 實時間 온라인制御시스템에서의 데이터通信의 제반양식 및 그 접속단의 한 방안이 제시되고 설계되었다. 접속단은 DMA 方式으로 함으로써 방대한 制御프로그램을 단순화 할 수 있었다. 이 方式은 실제로 서울市의 交通管制시스템에서 活用되어 成功的으로 실험되었다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.79-82
• /
• 2005

Recently the necessity of road data is still being increased in industrial society, so there are many repairing and new constructions of roads at many areas. According to the development of government, city and region, the update and acquisition of road data for GIS (Geographical Information System) is very necessary. In this study, the fusion method with range data(3D Ground Coordinate System Data) and Intensity data in stand alone LiDAR data is used for road extraction and then digital image processing method is applicable. Up to date Intensity data of LiDAR is being studied. This study shows the possibility method for road extraction using Intensity data. Intensity and Range data are acquired at the same time. Therefore LiDAR does not have problems of multi-sensor data fusion method. Also the advantage of intensity data is already geocoded, same scale of real world and can make ortho-photo. Lastly, analysis of quantitative and quality is showed with extracted road image which compare with I: 1,000 digital map.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 춘계 학술논문 발표대회
• /
• pp.130-131
• /
• 2015

Accurate construction progress measurement is an important issue for successful project delivery. This paper presents a method that keeps track of the progress measurement involved in construction operations and facilities visualization of the data using BIM and IOT. To verify the method, a residential house project was used for the case study. Test case verifies the usability and validity of the method implemented in the system.