• 한국지구과학회지
• /
• 제33권7호
• /
• pp.637-644
• /
• 2012

서울을 비롯한 수도권 일대는 우리나라 인구의 약 40%가 집중되어 갑작스럽게 닥치는 지진재해에 매우 취약한 곳이다. 역사문헌 분석에 의하면 과거 2000여 년간 서울 지역에서 발생한 피해 지진의 최대 크기는 MMI 진도 VIII-IX로 평가되며, 이들 지진으로 건물의 큰 흔들림, 담장과 성첩의 붕괴, 민가 붕괴, 다수의 사상자가 발생하였다. 서울 지역에서 MM 진도 VIII 이상의 피해지진은 1세기(A.D. 27년, 89년)에 2회 발생하였으며, 약 1430여년의 긴 휴지기 후 16-17세기(1518년, 1613년, 1692년)에 다시 3회 발생하였고, 그 후 현재 까지 휴지기 상태이다. 1518년 서울 지진(진도 VIII-IX)시에는 약 19일에 걸쳐 24회 이상의 여진이 발생하였으며, 서울 인접 지역과 황해도 지역에도 20여 일간에 걸쳐 많은 유발지진을 발생시켰다. 역사문헌에 근거한 서울 지역의 발생 가능한 최대 피해 지진은 진도 VIII-IX 이며 이러한 지진의 발생은 약 1400-1500여년의 긴 간격을 보인다.

• Earthquakes and Structures
• /
• 제8권1호
• /
• pp.153-184
• /
• 2015

Most damaging earthquakes come as complex sequences characterized by strong aftershocks, sometimes by foreshocks and often by multiple mainshocks. Complex earthquake sequences have enormous seismic hazard, engineering and societal implications as their impact on buildings and infrastructures may be much more severe at the end of the sequence than just after the mainshock. In this paper we examine whether historical sources can help characterizing the rare earthquake sequences of pre-instrumental times in full, including fore-, main- and aftershocks. Thanks to the its huge documentary heritage, Italy relies on one of the richest parametric earthquake catalogues worldwide. Unfortunately most current methods for assessing seismic hazard require that earthquake catalogues be declustered by removing all shocks that bear some dependency with those identified as mainshocks. We maintain that this requirement has led most modern historical seismologists to focus mainly on mainshocks rather than also on the fore- and aftershocks. To shed light onto major earthquake sequences of the past, rather than onto individual mainshocks, we investigated 10 damaging earthquake sequences ($M_w$ 4.7-7.0) that hit the L'Aquila area and central Abruzzo from the 14th to the 20th century. We find that most of the results of historical research are important for modern seismology, yet their rendering by the current parametric catalogues causes most information to be lost or not easily transferred to the potential users. For this reason we advocate a change in current strategies and the creation of a more flexible standard for storing and using all the information made available by historical seismology.

• Earthquakes and Structures
• /
• 제5권4호
• /
• pp.379-394
• /
• 2013

Post-earthquake fire (PEF) can lead to a rapid collapse of buildings damaged partially as a result of prior earthquake. Almost all standards and codes for the design of structures against earthquake ignore the risk of PEF, and thus buildings designed using those codes could be too weak when subjected to a fire after an earthquake. An investigation based on sequential analysis inspired by FEMA356 is performed here on the Immediate Occupancy, Life Safety and Collapse Prevention performance levels of structures, designed to the ACI 318-08 code, after they are subjected to an earthquake level with PGA of 0.35g. This investigation is followed by a fire analysis of the damaged structures, examining the time taken for the damaged structures to collapse. As a point of reference, a fire analysis is also performed for undamaged structures and before the occurrence of earthquake. The results indicate that the vulnerability of structures increases dramatically when a previously damaged structure is exposed to PEF. The results also show that the damaging effects of post-earthquake fire are exacerbated when initiated from the second and third floor. Whilst the investigation is made for a certain class of structures (conventional buildings, intermediate reinforced structure, 3 stories), the results confirm the need for the incorporation of post-earthquake fire into the process of analysis and design, and provides some quantitative measures on the level of associated effects.

• Advances in concrete construction
• /
• 제1권1호
• /
• pp.29-44
• /
• 2013

Post earthquake fire (PEF) can lead to the collapse of buildings that are partially damaged in a prior ground-motion that occurred immediately before the fire. The majority of standards and codes for the design of structures against earthquake ignore the possibility of PEF and thus buildings designed with those codes could be too weak when subjected to a fire after an earthquake. An investigation based on sequential analysis inspired by FEMA356 is performed here on the Life-Safety performance level of structures designed to the ACI 318-08 code after they are subjected to two different earthquake levels with PGA of 0.35 g and 0.25 g. This is followed by a four-hour fire analysis of the weakened structure, from which the time it takes for the weakened structure to collapse is calculated. As a benchmark, the fire analysis is also performed for undamaged structure and before occurrence of earthquake. The results show that the vulnerability of structures increases dramatically when a previously damaged structure is exposed to PEF. The results also show the damaging effects of post earthquake fire are exacerbated when initiated from second and third floor. Whilst the investigation is for a certain class of structures (regular building, intermediate reinforced structure, 3 stories), the results confirm the need for the incorporation of post earthquake fire in the process of analysis and design and provides some quantitative measures on the level of associated effects.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1997년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 1997
• /
• pp.41-48
• /
• 1997

The seismic risk in Seoul Metropolitan Area(latitude 37.0$^{\circ}$~37.8$^{\circ}$, longitude 126.5$^{\circ}$~127.5$^{\circ}$)based on all Korean earthquake data of Modified Mercalli Intensity equal to or greater than V is evaluated by extreme value method and point source method. The seismic risk estimated from all data turned out to be lower than from the data since the Chosen dynasty during which seismic data appear to be rather complete. The damaging earthquake of park horizontal ground acceleration grater than 0.1g turns out to occur with 90% probability of being exceeded in 200 years when the data since the Chosen Dynasty are used.

• 한국지진공학회논문집
• /
• 제20권7_spc호
• /
• pp.527-536
• /
• 2016

This paper investigates seismic damage potential of recent September 12 M5.8 Gyeongju earthquake from diverse earthquake engineering perspectives using the accelerograms recorded at three stations near the epicenter. In time domain, strong motion durations are evaluated based on the accelerograms and compared with statistical averages of the ground motions with similar magnitude, epicentral distance and soil conditions, while Fourier analysis using FFT is performed to identify damaging frequency contents contained in the earthquake. Effective peak ground accelerations are evaluated from the calculated response spectra and compared with apparent peak ground accelerations and the design spectrum in KBC 2016. All these results are used to consistently explain the reason why most of seismic damage in the earthquake was concentrated on low-rise stiff buildings but not quite significant. In order to comparatively appraise the damage potential, the constant ductility spectrum constructed from the Gyeongju earthquake is compared with that of the well-known 1940 El Centro earthquake. Deconvolution analysis by using one accelerogram speculated to be recorded at a stiff soil site is also performed to estimate the soil profile conforming to the response spectrum characteristics. Finally, response history analysis for 39- and 61-story tall buildings is performed as a case study to explain significant building vibration felt on the upper floors of some tall buildings in Busan area during the Gyeongju earthquake. Seismic design and retrofit implications of M5.8 Gyeongju earthquake are summarized for further research efforts and improvements of relevant practice.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2005년도 학술발표회 논문집
• /
• pp.18-25
• /
• 2005

Stochastic ground-motion method is adopted to simulate horizontal PGA values for the offshore Uljin earthquake recorded at nationwide seismic stations. For this purpose, the Fourier spectra are calculated at every stations based on comprehensive results of wave propagation and site effect which were previously revealed through inversion process applied to large accumulated spectral D/B. In addition, the apparent source spectrum of the offshore Uljin earthquake is estimated by removing the path and site response from the observed spectra. The distance dependent time-duration model is revised by iteratively fitting the PGA values generated by using the raw spectra data to the observed PGA data. The stochastic ground-motion method predicts the observed PGA values within a error of ${\sigma}_{log10}=0.1$. Transfer functions of a site relative to another site are estimated based on the error residual of the inversion results and used to convert PGA values at multiple stations to expected PGA values at a reference station of TJN. The converted PGA values can be used as basic data to evaluate the ground-motion attenuation relations developed for seismic hazard analysis that concerns the large damaging earthquakes.

• Earthquakes and Structures
• /
• 제18권3호
• /
• pp.337-348
• /
• 2020

Experimental testing has been considered as one of the most straightforward approaches to realize the structural behavior for earthquake engineering studies. Recently, novel and advanced experimental techniques, which combine numerical simulation with experimental testing, have been developed and applied to structural testing practically. However, researchers have to take the risk of damaging specimens or facilities during the process of developing and validating new experimental methods. In view of this, a small-scale structural laboratory has been designed and constructed in order to verify the effectiveness of newly developed experimental technique before it is applied to large-scale testing for safety concerns in this paper. Two orthogonal steel reaction walls and one steel T-slotted reaction floor are designed and analyzed. Accordingly, a large variety of experimental setups can be completed by installing servo-hydraulic actuators and fixtures depending on different research purposes. Meanwhile, a state-of-the-art digital controller and multiple real-time computation machines are allocated. The integration of hardware and software interfaces provides the feasibility and flexibility of developing novel experimental methods that used to be difficult to complete in conventional structural laboratories. A simple experimental demonstration is presented which utilizes part of the hardware and software in the small-scale structural laboratory. Finally, experimental layouts of future potential development and application are addressed and discussed, providing the practitioners with valuable reference for experimental earthquake engineering.

• 한국지진공학회논문집
• /
• 제1권4호
• /
• pp.29-35
• /
• 1997

MM진도(Modified Mercalli Intensity) V이상의 한반도 지진자료에 의거하여 서울 수도권일원 $(위도 37.0^{circ}~37.8^{circ} N, 경도 126.5^{circ}~127.5^{circ} E)$ 의 확률론적인 지진위험도가 점지진원방법에 의해 추정되었다. 전지진자료를 이용하여 추정된 지진위험도는 비교적 완전하다고 여겨지는 조선시대이후의 지진자료를 이용하여 추정된 지진위험도보다 더 낮다고 추정되었다. 수평지반가속도 0.1g 이상의 파괴적인 지진은 90% 초과확률로서 전지진자료와 조선시대이후의 지진자료가 이용되었을 때 각각 500년과 200년 기간에 발생한다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.180-181
• /
• 2019

South Korea has long been without major earthquakes. But 317 public facilities have been damaged by Po-Hang earthquake. Among them, 103 educational facilities suffered 25.6 billion won worth of damage. This is the most damaging of public facilities. The earthquake damage was mainly centered on non-seismic retrofit educational facilities and masonry architectural wall systems installed on the outer walls of buildings. Therefore, the purpose of this study is to develop a filling material that can be applied to the non-seismic retrofit of masonry architectural wall systems installed on the outer walls of educational facilities. To achieve the objective, first, set the filling material requirements. Second, set the sequence model of experiments and prepare for the experiment. Third, after the experiment, analyze the results obtained through the experiment. Forth, the optimal filling material is selected by comparing the analyzed results with the requirements. As a results, E-S-X sample using epoxy resin were selected for the seismic retrofit of masonry architectural wall systems in educational facilities. In the future, this study can be used as a basic material for developing seismic reinforcement methods guidelines in domestic existing educational facilities.