• Korean Journal of Agricultural and Forest Meteorology
• /
• v.25 no.3
• /
• pp.197-207
• /
• 2023

This study was conducted with the purpose of measuring the disaster damage reduction effect according to the provision of the early warning service ahead of the nationwide expansion. The damage reduction effect was measured using insurance data for 19 insured crops in areas that early warning services were provided during the period from 2017 to 2020. As a result of the measurement, it was analyzed that the early warning service had the effect of preventing or reducing disaster damage to farms. In particular, it was found that the disaster reduction effect was greater when disaster prevention facilities were equipped. The implications obtained from the results are as follows. First, by presenting subjectively experienced disaster reduction cases as numerical effects using insurance data with public confidence and objectivity, it can be used as basic data such as expansion of service area, discount of insurance premium with service adoption, and promotional materials for service subscription for early warning service. Second, in expanding and distributing early warning services, giving priority to areas or crops equipped with disaster prevention facilities can help increase the efficiency and effectiveness of the project.

• Journal of the Korean Institute of Gas
• /
• v.22 no.5
• /
• pp.79-88
• /
• 2018

This study presents an evaluation method to estimate the damage scale of chemical storage tank of petrochemical plant due to the earthquake that is likely to occur among NaTech damage types. Based on this, the risk for damage reduction of chemical storage tanks was evaluated. As a result of the study, the risk of the storage tank increased greatly considering the earthquake, and the risk was greatly reduced as a result of evaluating the proposed measures to mitigate the damage impact on the earthquake. This study is expected to contribute to the research on the reduction of NaTech damages such as typhoons and thunderstorms as well as earthquakes, and to establish an emergency response plan. In the future, it is necessary to systematically study and institutionalize the risk reduction measures considering earthquakes.

• Korea Journal of Cosmetic Science
• /
• v.2 no.1
• /
• pp.1-10
• /
• 2020

Protection mechanisms for skin damage of ultraviolet (UV) absorbers in personal care products for protection against UV are well studied, but not for hair protection. The purpose of this study is to describe and compare the changes of physical property produced in human hair by doses of the UV-B exposure causing protein degradation. To observe the change of physical properties in hair, the experimental intensity of UV-B exposure has been established on the basis of statistical data from official meterological administration as daily one hour sunlight exposure for two weeks. Polysilicone-15, ethylhexyl methoxycinnamate (OMC), and octocrylene were employed for UV-B absorber, and those were treated to hair swatch by rubbing wash through shampoo and conditioner. Bending rigidity displayed kinetically successive reduction at high doses of UV exposure up to the 8,000 s, and exhibited different level at each sample of UV-B absorber. However, the values of Bossa Nova Technologies (BNT) for shinning factor were already saturable at the 2,000 s exposure except that treated with polysilicone-15. The differential scanning calorimetry (DSC) to measure a strength of inner protein produces a successive reduction of enthalpy as like a reduction of bending rigidity upon UV exposure. Surface roughness from lateral force microscope (LFM) acquired immediately after UV exposure show a saturable frictional voltage which has been also found in a saturable BNT data as the time of UV exposure increases. Through researching the DSC and the LFM, shinning of hair was much correlated to the protein damage at the surface, and bending rigidity could be regulated by the protein structural damage inside hair. Therefore, the optimization of efficient strategy for simultaneous prevention of hair protein on the surface and internal hair was required to maintain physical properties against UV.

• Structural Engineering and Mechanics
• /
• v.33 no.3
• /
• pp.325-337
• /
• 2009

Structural damage detection, damage localization and severity estimation of jacket platforms, based on calculating modal strain energy is presented in this paper. In the structure, damage often causes a loss of stiffness in some elements, so modal parameters; mode shapes and natural frequencies, in the damaged structure are different from the undamaged state. Geometrical location of damage is detected by computing modal strain energy change ratio (MSECR) for each structural element, which elements with higher MSECR are suspected to be damaged. For each suspected damaged element, by computing cross-modal strain energy (CMSE), damage severity as the stiffness reduction factor -that represented the ratios between the element stiffness changes to the undamaged element stiffness- is estimated. Numerical studies are demonstrated for a three dimensional, single bay, four stories frame of the existing jacket platform, based on the synthetic data that generated from finite element model. It is observed that this method can be used for damage detection of this kind of structures.

• Journal of Urban Science
• /
• v.11 no.1
• /
• pp.1-8
• /
• 2022

As the magnitude and frequency of earthquakes increase in Korea, interest in earthquake damage reduction technology has increased. Therefore, research on vibration damping devices that directly respond to seismic loads is being actively researched. After an earthquake, damage or destruction of the device occurs due to the yield of materials, and thus it takes considerable cost and time for restoration and replacement. To supplement the problems of the existing earthquake damage reduction technology, a study was conducted on the recentering smart damper that can be used continuously after an earthquake. In this study, the recentering smart damper that can be restored to its original shape after load removal was developed using superelastic shape memory alloy, pre-compressed polyurethane. General steel was commonly applied to verify the seismic performance of the superelastic shape memory alloy, and the performance of the smart damper was verified according to the amount of polyurethane pre-compressed

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.3
• /
• pp.1325-1332
• /
• 2016

Radioprotective effects of ginger essential oil (GEO) on mortality, body weight alteration, hematological parameters, antioxidant status and chromosomal damage were studied in irradiated mice. Regression analysis of survival data in mice exposed to radiation yielded LD50/30 as 7.12 and 10.14 Gy for control (irradiation alone) and experimental (GEO-treated irradiated) mice, respectively, with a dose reduction factor (DRF) of 1.42. In mice exposed to whole-body gamma-irradiation (6 Gy), GEO pre-treatment at 100 and 500 mg/kg b.wt (orally) significantly ameliorated decreased hematological and immunological parameters. Radiation induced reduction in intestinal tissue antioxidant enzyme levels such as superoxide dismutase, catalase, glutathione peroxidase and glutathione was also reversed following administration of GEO. Tissue architecture of small intestine which was damaged following irradiation was improved upon administration of GEO. Anticlastogenic effects of GEO were studied by micronuclei assay, chromosomal aberration and alkaline gel electrophoresis assay. GEO significantly decreased the formation of micronuclei, increased the P/N ratio, inhibited the formation of chromosomal aberrations and protected agaisnt cellular DNA damage in bone marrow cells as revealed by comet assay. These results are supportive of use of GEO as a potential radioprotective compound.

• Structural Engineering and Mechanics
• /
• v.42 no.6
• /
• pp.799-813
• /
• 2012

Five two-span reinforced concrete (RC) slabs and seven two-span RC beams were tested under the ISO 834 standard fire with different durations. CFRP strengthening was then applied to some of the specimens after the damaged concrete was removed from the specimens and replaced with polymer mortar. All the specimens were loaded to failure to investigate the influence of fire-damage and the effectiveness of strengthening methods. Test results indicated that the flexural capacities of specimens decrease with the fire duration increases. Moreover, fire exposure had more significant effect on the flexural rigidity than on the bearing capacity of the specimens. After rehabilitation, the bearing capacities of specimens reached or even exceeded that of the reference RC specimen, and the strengthening methods seemed to have limited effect on flexural rigidity recovery. From the analysis of moment redistribution of tested beams, elevated temperature is found having different impacts on sagging moment region and hogging moment region. The damage of RC continuous member is definitely a comprehensive response of different regions.

• The Korean Journal of Physiology and Pharmacology
• /
• v.1 no.2
• /
• pp.209-219
• /
• 1997

Previous studies have demonstrated that oxidative stress involving generation of reactive oxygen species (ROS) is responsible for the cytotoxic action of $TNF{\alpha}$. Protective effect of small heat shock proteins (small HSP) against diverse oxidative stress conditions has been suggeted. Although overexpression of small hsp was shown to provide an enhanced survival of $TNF{\alpha}$-sensitive cells when challenged with $TNF{\alpha}$, neither the nature of $TNF{\alpha}$-induced cytotoxicity nor the protective mechanism of small HSP has not been completely understood. In this study, we have attempted to determine whether $TNF{\alpha}$ induces oxidative DNA damage in $TNF{\alpha}$-sensitive L929 cells. We chose to measure the level of 8-hydroxy-2'-deoxyguanosine (8 ohdG), which has been increasingly recognized as one of the most sensitive markers of oxidative DNA damage. Our results clearly demonstrated that the level of 8 ohdG increased in L929 cells in a $TNF{\alpha}$ dose-dependent manner. Subsequently, we asked whether small HSP has a protective effect on $TNF{\alpha}$-induced oxidative DNA damage. To accomplish this goal, we have stably transfected L929 cells with mouse small hsp cDNA (hsp25) since these cells are devoid of endogenous small hsps. We found that $TNF{\alpha}$-induced 8 ohdG was decreased in cells overexpressing exogenous small hsp. We also found that the cell killing activity of $TNF{\alpha}$ was decreased in these cells as measured by clonogenic survival. Taken together, results from the current study show that cytotoxic mechanism of $TNF{\alpha}$ involves oxidative damage of DNA and that overexpression of the small hsp reduces this oxidative damage. We suggest that the reduction of oxidative DNA damage is one of the most important protective mechanisms of small HSP against $TNF{\alpha}$.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.7 no.5
• /
• pp.119-127
• /
• 2007

We reconstructed the community disaster risk and patterns of damage magnitude using 'Annual Report of National Disaster Data'. And we developed the inspection index for damage reduction capacity of each facility or each damage prevention measure. The inspection indices include climatic and hydrological vulnerabilities, and disaster probability components. Also we considered all indices and components for DB construction on the GIS system. Then we constructed 'Inspection for Safety Degree of Community System(ISDCS)' according to the facility's criteria from the combination of damage reduction capacity of facility and damage magnitude. The safety index has designed a system that encourages communities to carry out a list of activities in the raw from natural disaster. The activities ultimately saves lives, reduce property damage, and protect disaster facilities. Damage patterns were also analyzed according to damage type using pattern analysis and GIS.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.05a
• /
• pp.27-30
• /
• 2004

Clad wire , which has the advantages of the high strength of a steel core and the electro-conductivity, corrosion resistance of a copper layer, is widely being used the telecommunications, electric-electronic and military technology industries, among others. It is important to obtain uniform coated rate when producing clad wires. Clad wire drawing process can be influenced on damage and coated rate of core and sleeve by process variables as semi-die angle and reduction in area. Therefore, in this study, the finite-element results established in previous study is used to analyze the effect of the various forming parameters, which included the semi-die angle, reduction in area etc. The coated rate will be predicted with observation copper coated rate variation according to total reduction in area and the optimal pass schedule will be set up through proper reduction in area and semi-die angle variation.