• 한국의류학회지
• /
• 제14권4호
• /
• pp.262-273
• /
• 1990

The purpose of this study is to investigate the softening effect of cellulase-treated cotton fabric and the damage on the fabric which is accompanied by the treatemnt. Cotton fabric is treated with cellulase under various concentrations and time, and the weight loss, hand values (by KES), surface characteristics, moisture regain, tensile strength, copper number and intrinsic viscosity of the treated samples and untreated samples have been compared. The results are as follows: 1. The weight loss of cotton fabric increased as the concentration of cellulase and the treating time increased. 2. The enzyme treatment had little effect on the stiffness of the treated samples but anti- drape stiffness decreased for the treated samples. Fullness and softness of the treated samples increased and crispness decreased with the lowest level reaching after two hours of the treatment for all concentrations. Scrooping feeling of the treated samples increased and flexibility with soft feeling increased as the treating time and the concentration of cellulase increased. 3. Moisture regain of the samples decreased as the treating time and the concentration of the enzyme increased and the treated fabric showed cracks on the fiber surface, and much surface fibers on the fabric have been removed after the treatment. 4. Tensile strength of the samples decreased as the treating time and as the concentration of cellulase increased, and the copper number increased while the intrinsic viscosity decreased as the treating time increased, but cellulase concentration had a little effect.

• 한국의류학회지
• /
• 제11권2호
• /
• pp.101-112
• /
• 1987

The purpose of this study is to investigate the influence of addition of sodium dodecyl sulfate(SDS) when wool is treated with sodium hydroxide(NaOH). Physical and chemical changes were examined on wool treated with various cone. of NaOH and SDS simultaneously. The result are as follows. 1. The higher the temperature and the longer the time of NaOH treatment are, the more alkali damage wool get : increase in weight loss and decrease in urea-bisalphite solubility and in tensile strength. But the treatment time reacts less effective than the temperature. 2. When wool is treated with NaOH, at NaOH cone. under $10^{-3}M$., the addition of SDS alleviates the alkali reaction on wool: increase in cystine contents and in urea-bisulpite solubility, and decrease in degree of swelling. On the other hand, at NaOH cone. over $10^{-2}M$., the addition of SDS promotes the alkali reaction on the wool. 3. When wool is treated with NaOH, the addition of SDS shows no changes on the tensile strength. On the other hand, at NaOH cone. under $10^{-2}M$., the addition of SDS shows no changes on the softness of wool, but at the $10^{-1}M$. NaOH cone. addition of SDS increases the soft-ness of wool. The area shrinkage of wool treated with NaOH and SDS shows less changes than with NaOH only.

• 보존과학회지
• /
• 제35권1호
• /
• pp.19-31
• /
• 2019

To study the cleaning effects and post-treatment stability assessment of various methods of cleaning textiles with metal thread, six naturally-soiled historical textiles with metal thread were investigated at the Metropolitan Museum of Art, New York. Prior to the cleaning of fabricated gold, silver, and copper thread that had been glued onto a paper substrate, the artificial deterioration was carried out in a controlled environment with light(UV and daylight), and temperature and humidity factors which would weaken and damage the samples. A synthetic soil mixture was applied to the samples to imitate soil found on the historic and archaeological textiles with metal thread; the cleaning effect and post-treatment assessment were investigated by use of three textile cleaning methods: mechanical cleaning, wet cleaning, and solvent cleaning. While investigating the naturally-soiled textiles with metal thread, it was determined that the soil colors and sizes of contaminating particles of each textile were different due to the diversity of original environmental factors and conditions. After cleaning with kneaded rubber, Stoddard solvent, n-decane or n-hexane, a bright, clean effect was apparent. Kneaded rubber was successful in picking up both large and small particles, but its stickiness caused some of the metal leaf to peel off. Stoddard solvent produced a good cleaning effect, but after use of n-hexane and n-decane in the cleaning process, a white layer of residue remained on the textile's surface. Wet cleaning was not effective and the rapid humidity changes between wet and dry conditions caused the edges of the paper substrate to lose their original shape.

• 한국의류산업학회지
• /
• 제22권3호
• /
• pp.386-398
• /
• 2020

This study compared dip-coating and in situ polymerization methods for the development of nanofiber-based E-textile using polypyrrole. Nanofiber webs were fabricated by electrospinning an aqueous poly (vinyl alcohol) (PVA) solution. Subsequently, the PVA nanofiber web underwent thermal treatment to improve water resistance. Dip-coating and in situ polymerization methods were used to deposit polypyrrole on the surfaces of the nanofiber web. An FE-SEM analysis was also conducted to examine specimen surface characteristics along with EDS and FT-IR that analyzed the chemical bonding between polypyrrole and specimens. The line resistance and sheet resistance of the treated specimens were measured. Finally, an electrocardiogram (ECG) was measured with textile sensors made of the polypyrrole-deposited PVA nanofiber webs. The polypyrrole-deposited PVA nanofiber webs fabricated by dip-coating dissolved in the dip-coating solution and indicated damage to the nanofibers. However, in the case of in situ polymerization, polypyrrole nanoparticles were deposited on the surface and inter-web structure of the PVA nanofiber web. The resistance measurements indicated that polypyrrole-deposited PVA nanofiber webs fabricated by in situ polymerization with an average sheet resistance of 5.3 k(Ω/□). Polypyrrole-deposited PVA nanofiber webs fabricated by dip-coating showed an average sheet resistance of 57.3 k(Ω/□). Polypyrrole-deposited PVA nanofibers fabricated by in situ polymerization showed a lower line and sheet resistance; in addition, they detected the electrical activity of the heart during ECG measurements. The electrodes made from polypyrrole-deposited PVA nanofiber webs by in situ polymerization showed the best performance for sensing ECG signals among the evaluated specimens.

• 산업융합연구
• /
• 제21권2호
• /
• pp.93-101
• /
• 2023

본 연구에서는 칼과 가위 및 화학약품에 의한 물리·화학적 섬유 손상을 분석하여 손상의 원인 파악을 위한 기술 데이터 자료로써 활용하고자 하였다. 칼 4종류 및 가위 5종류와 4종류의 화학약품(황산, 염산, 수산화나트륨, 수산화칼륨)을 이용하여 면(Cotton), 울(Wool), 폴리에스터(Polyester), 레이온(Rayon), T/C(Polyester 50%, Cotton 50%), T/W(Polyester 50%, Wool 50%)에 물리·화학적 손상을 생성하여 공구와 화학약품에 따른 손상을 분석하였다. 칼과 가위에 의한 관통 손상은 칼의 날 부분이 관통한 경우 공통으로 "V" 유형의 손상이 나타났으며, 칼의 등 부분이 관통한 칼의 경우 "T", "ㅁ", 갈고리, "ㄷ" 유형의 손상이 나타났다. 또한, 가위의 경우 모두 "Y" 유형의 손상이 공통으로 나타났다. 화학약품에 의한 섬유 손상은 유류 흔적, 부식, 분해, 수축, 변색 등 다양한 손상이 나타났으며, 화학약품과 섬유의 종류에 따라 나타나는 손상에 차이를 보였다. 섬유의 물리적 손상은 공구의 형태적 특성에 따라 나타나는 특징에 차이를 보였으며, 화학적 손상은 화학약품과 섬유의 종류에 따른 특징 차이를 보임을 확인하였다.

• 한국염색가공학회지
• /
• 제1권1호
• /
• pp.54-62
• /
• 1989

The woven fabric composed of nylon 6 filaments was treated with aqueous solutions (20, 30, 40, 50, 60%) of formic acid at 3$0^{\circ}C$ for 10 minutes under unrestrained condition, and the shrinkage behavior and some kinds of properties were examined. The shrinkages of the constituent yarns and fabric were increased with formic acid concentration, but they were lower than that of the original filaments because of fabric-structural factors. And the shrinkage of the warp was lower than that of the weft because of the residual stress from weaving process. By the restraint forces such as fabric-structural factors and residual stress, the constituent filaments were damaged partially at 60% of formic acid concentration and the degree of damage on the warp was greater than on the weft. And though the fabric count were increased overall, the spacing between the warps was decreased prior to the weft and eliminated nearly at 60% of formic acid concentration. The thickness, tensile strength, elongation, and handle value of fabric were increased overall with formic acid concentration excepting that the tensile strength for both the warp and weft directions and the elongation for the warp direction were decreased instead by the damage of yarns. But the crease recovery was decreased except the case of the weft direction at 60% of formic acid concentration.

• Applied Biological Chemistry
• /
• 제13권3호
• /
• pp.243-256
• /
• 1970

Nowadays, the damages caused by molds in cotton textile goods becomes influential. In our country, however, the relations between cotton goods and molds are not investigated and studied in detail. Two hundred and fifty seven kind of mold's samples were collected in ninety places through the whole country. The molds samples are mainly gathered according to each regions and seasons from molded cotton textiles. Out of this samples, we isolated six hundred and seventy two strains of molds and the results of isolation are following. 1. The distributed molds were Aspergillus sp., Rhizopus sp., Penicillium sp., etc. among them Aspergillus sp. were most widely distributed, and next were Rhizopus sp., Penicillium sp. etc. 2. The distribution of Aspergillus sp. abounded peculiarly in the dry season, while Rhizopus sp. in the rainy season. 3. The C.M.C, descomposing enzymes forming activity on molds were greatly concerned with intensity damage of cotton textile goods. 4. The formation of C.M.C. decomposing enzyme was only influenced by physiology of each strains. 5. Regarding to the growth. a. The molds which were saprophyting on the cotton textile goods were indicated vigorous growing. b. Among isolated six hundred and seventy two strains, there were above a hundred strains which produced pigment and nearly half of them fifty nine strains were Aspergillus sp. 6. Twenty one strains in isolated six hundred and seventy two strains were indentified which can heavily damage upon cotton textile. As a results of indentification of the selected strains, the following species was abtained, Aspergillus sydowi, wentii, niger, luchuensis, flavus, fumigatus, nidulans, Penicillium frequentants, roqueforti, chrysogenum, albicans, Rhizopus oligosporus, delemar, Mucor rouxii, mucedo, Neurospora sitophila, Monilia variabilis, fructigena, Cladsporium hurbarum and Aspergillus spp. Mucor spp.

• 한국의류학회지
• /
• 제31권11호
• /
• pp.1565-1573
• /
• 2007

This research was aimed to investigate the effect of $K_2CO_3$ instead of NaOH on retting of the kenaf bast. We examined the relationship between separation of fiber bundle and tensile strength besides observing the color, handle and cross sectional view for the kenaf fiber retted with various concentration(100, 150, 200, 250, 500, 1000mmol) of $K_2CO_3$ and double retted with 0.5% pectinase after $K_2CO_3$ retting. The one retted on low $K_2CO_3$ concentration, $150{\sim}200mmol$, showed the best result on color, handle and luster. The separation of fiber bundle started even at the low $K_2CO_3$ concentration, 100mmol, and as the $K_2CO_3$ concentration was higher, the size of the fiber bundle was smaller. In the case of 1000mmol, the fiber bundle became irregular, but they were breaking up into certain way. Regardless of $K_2CO_3$ concentration, the thinner the diameters of the kenaf fiber bundle, the stronger tensile strength have appeared. This result corresponds with the result of cross sectional view. Retting on $150{\sim}200mmol\;K_2CO_3$ concentration was most effective on fiber bundle#s separation and tensile strength. The one with double retted with 0.5% pectinase after $K_2CO_3$ retting showed very small size of fiber bundle and low tensile strength compare to the one just retted on $K_2CO_3$. This decrease of tensile strength seem to be related to damage of the fiber resulted by excessive fibrillation.

• 패션비즈니스
• /
• 제10권1호
• /
• pp.94-105
• /
• 2006

Hair bleaching is a treatment process in which the melanic pigment is oxidized by hydrogen peroxide. With the increase of the number of treatments, $1{\sim}10$ levels of various colors develop, the hair luster diminishes, and the appearance becomes very rough. In this study, by changing the number of hair bleaching and bleaching conditions, the changes in the degree of hair damage and its process were observed through the use of scanning electron microscopy. The color changes were also compared through the use of spectrophotometer. In order to study the physical changes of the bleached hairs and to search for the optimum conditions to keep the hair damages minimum during bleaching, tensile properties were measured and reviewed. By increasing the number of hair bleaching and by the severe conditions, the scales became eroded and the protection layers were decreased, and the oxidation reached the inner sectors resulting in rough surface and fibrillation. The surface of the hairs became bright yellowish and transparent by the bleaching of melanic pigments or by the destruction of pigments. With the increase of bleaching degree, in terms of physical changes, the breaking strength decreased while the elongation increased a little.

• 한국의류학회지
• /
• 제45권2호
• /
• pp.253-270
• /
• 2021

This survey provides research into developing knee braces to protect the knee against damage, reduce knee pain, and strengthen the knee. A total of 235 surveys were conducted from December 2019 to January 2020. The subjects were adults in their 20s and over who lived in the Seoul metropolitan area and had experience of using knee braces. In terms of age differences, subjects over 60 years of age purchased knee braces mostly to secure a reduction of pain (ROP), whereas subjects in their 20s and 30s purchased knee braces for physical shock protection (PSP). Subjects in their 40s and 50s purchased knee braces for improvement of muscle movement (IMM). There was no significant difference in shape, material, and locking method based on the reason for wearing the knee brace. These results show that it is conceivable and maybe preferable to produce different knee braces-with a variety of shapes, materials, and locking materials-according to the reason behind wearing a knee brace. Knee braces are worn currently without any differentiation despite the findings of this study. In particular, we argue the need for functional and differentiated development of knee braces specifically for PSP, ROP, and IMM.