• Journal of the Korean Society of Costume
• /
• v.53 no.5
• /
• pp.23-31
• /
• 2003

The Purpose of this study was to isolate and identify fungi found in excavated clothes dating on the 16th century. As a result of microscoping with LPCB staining, seven isolated strains were classified-Acremonium strictum, Acremonium kiliense, Fonsecaea sp., Candida sp., Trichoderma sp., Cladosporium spp., Penicillium spp.. In the process of isolation and identification of fungi by the sort of textile, more fungi were found in cotton, cotton batt and silk than in ramie and hemp, suggesting that hemp has antibacterial characteristics due to the presence of lignin. In the Comparison washed samples with unwashed ones, there were more kinds of fungi in washed samples. In the cellulase activity test, Acremonium kiliense had the highest level cellulase activity, suggesting that Acremonium killiense has an important Influence on damage of textiles.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.2 s.150
• /
• pp.338-347
• /
• 2006

Due to the complex environment in the ground, most of excavated costumes undergo deterioration and color change. To reduce the extent and intensity of the staining and to recover the original color or gray fabrics of excavated costumes, bleaching would be required. Excavated historical costumes are very delicate in nature, therefore, special care is needed in bleaching process. Several bleaching agents were selected and applied to the control cotton fabric and pre-deteriorated cotton fabrics to examine the change of color and physical properties after bleaching. A dual bleaching using hydrogen peroxide and sodiumborohydride showed the superior bleaching effect to the other bleaching agents. The strength of pre-deteriorated fabrics slightly increased after dual bleaching. The six historical costumes which belonged to General Duk-Ryung Kim's nephew's wife were dual bleached. They became remarkably cleaned and brightened. The treatments improved the appearance of costumes. By microscopic investigation, it is found that costumes did not show the damage after treatment. In conclusion, it is possible to bleach historical textiles without damage using appropriate bleaching agents like hydrogen peroxide and sodiumborohydride.

• Textile Coloration and Finishing
• /
• v.23 no.4
• /
• pp.250-256
• /
• 2011

In this work, the effects of surfactant and solvents, such as benzyl alcohol and n-propyl alcohol, on the human hair dyeing with acid dye was investigated including the amount of dyes in hair according to dyeing time, temperature, and pH. And the damage of dyed hair was assessed by water retention, protein release, and SEM images of the dyed hairs. By adding benzyl alcohol in acid dyeing, the dyeing rate was increased and the dyeing equilibrium was established at early stage. The water retention of the dyed hair was increased and the protein release of the dyed hair was decreased. Therefore the hair was damaged less during the dyeing.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.10a
• /
• pp.15-18
• /
• 2004

Nondestructive damage sensing and mechanical properties for thermal treated carbon nanotube(CNT) and nanofiber(CNF)/epoxy composites were investigated using electro-micromechanical technique. Carbon black (CB) was used only for the comparison. Electro-micromechanical techniques were applied to obtain the fiber damage and stress transferring effect of carbon nanocomposites with their contents. Thermal treatment and temperature affected on apparent modulus and electrical properties on nanocomposites due to enhanced inherent properties of each CNMs. Coefficient of variation (COV) of volumetric electrical resistance can be used to obtain the dispersion degree indirectly for various CNMs. Dispersion and surface modification are very important parameters to obtain improved mechanical and electrical properties of CNMs for multifunctional applications. Further optimized functionalization and dispersion conditions will be investigated for the following work continuously.

• Textile Coloration and Finishing
• /
• v.22 no.4
• /
• pp.373-379
• /
• 2010

The laboratory inspection and analysis of several types of ropes such as edge tensile test, D/d tensile test and abrasion test were carried out in order to investigate the abrasion degradation by external damage and to obtain the fundamental data for measurement against the abrasion. PET ropes were socketed and evaluated under tensile testing. A yarn-on-yarn abrasion test machine has been developed to study the damage and failure associated with rubbing between fiber surfaces. The abrasion test method consists of sliding a length of interwrapped yarn against itself in a reciprocating fashion, either dry or immersed in liquid. It has also been adapted to measure yarn-on-yarn friction. The influence of spin finish on yarn friction and abrasion was investigated extensively. This study indicates that finish has a major effect not only on yarn performance but also on rope performance under the marine environment.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.1580-1587
• /
• 2005

To calculate the long-term allowable strength of geosynthetic reinforcement, replacement method was recommended. The isochronous creep curve by S. Turner was used to define the relation between creep strain and allowable strength. In isochronous curve at given time, one can read the allowable strength at allowable creep strain. The allowable strain gets from specification by directors or manufacturers according to the allowable displacement of reinforced structures. The allowable strength can be determined in relation to the allowable horizontal displacement each structures case by case. The effect of install damage on isochronous behaviors of geosynthetic reinforcement was little. In previous study, install damage increase the creep strain slightly. And the degradation was not identified. But it is supposed that degradation increase the creep strain. In conclusion, The recommended model to determine long-term allowable strength of geosynthetic reinforcements considering tensile deformation of reinforcement and soil is fit for proper, correct and economic design for reinforced earth walls.

• Journal of the Korean Society of Costume
• /
• v.59 no.3
• /
• pp.157-165
• /
• 2009

This study intends to discuss the efficient stage costume design that uses costume-rentals and production method as a realistic alternative for production of stage costume of low budget performance. Directly participating in the costume design and production of the performance , this researcher applied the methodology of corroborative study on the basis of production process and results by referring to the papers and literature published by academic society for the theory necessary for study. Centering around the western costume in the stage costumes of , the scope of study was the costume of Paris, France prevalent at the end of the 19th century which is epochal background of performance. In spite of its merit of reducing production charge and production in the low budget performance, costume-rentals is subject to the lack of considering unitγ with other visual factors and limit in reflecting the creativity of costume designer. The following actions shall be taken to solve such problem. First, it is essential to set production direction and plan that meets budget and work concept. Second, it is required to highlight the characteristic factor of the age which is the background of work so as to grant the sense of age and to produce the visual unity of costume by supplementing the costume composition. Third, it is necessary to make large effect with low lost by using costume articles that can express the characteristics of the age. Fourth, it is required to efficiently reflect the transformation of design by minimizing the damage of costume through research on the sewing method and materials as well as creative idea. In this way, the efficient stage costume could be realized in the performance with low budget by approaching costume-rentals in the viewpoint of costume design, transforming it in accordance with work concept and adding the visual factors.

• Textile Coloration and Finishing
• /
• v.13 no.4
• /
• pp.272-281
• /
• 2001

Shrink resist finishing of wool fabric was carried out with MONAMIN BTN shrink resist agent after chlorination with D.C.C.A.(dichloro isocyanuric acid). The purpose of this study is to investigate the effect of treating conditions, such as concentrations of D.C.C.A and MONAMIN BTN, pH of treating bath, dying times, curing times and temperatures, on shrink resist finishing. Mechanical properties of the treated fabric were measured by KES-FB system. The optimum chlorination of wool corresponds to 2∼3%(o.w.f.) of D.C.C.A. without rendering the damage on surface of wool fiber. Also it seems likely that the shirink resist finishing carried out at 2 ∼3%(o.w.f.) of MONAMIN BTN and pH 7∼8 of treating bath is effective in increasing a softness of hand.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.305-313
• /
• 2010

HDPE smooth and textured GMs were cut into dumbbell shape and notched where depth of the notch produced a ligament thickness of 90% to 10% of the nominal thickness of the specimen at 10% interval. Yield stress and elongation were measured of those samples and plotted on Graph. Yield stress and elongation at yield point decreases gradually as the notch depth is increased. Both installations damaged and notched GMs were used to understand stress crack behavior. Intact sample were notched in such a manner that the depth of notch produced a ligament thickness of 80% of the nominal thickness of the specimen. Installation damaged samples were not notched. Stress Crack Resistance behavior was observed using NCTL Test at $50{\pm}1^{\circ}C$ at different yield stresses immerging with pH 4 and pH 12 buffer solutions. Significant difference was observed in both cases.

• Journal of Sericultural and Entomological Science
• /
• v.10
• /
• pp.73-75
• /
• 1969

There are two fold aims in this experimental study. The aim is to investigate the bacteria which produce the high activity enzyme or the cocoon for utilization to the textile and the industry. The ether is to protect against the bacteria that damage silk protein during storage. The results are summarized as followes: 1. Among the isolated bacteria from the cocoon, No 4 strain had the high activity of the $\alpha$-amylase. But this strain had not been identified. The results of experiment is shown in the table II. 2. Among the isolated bacteria from the cocoon, No II strain had the high activity of the protease on substance of the casein. The results of the experiment is shown in the table II. 3. The bacteria which had the high activity of the degumming effect of the sericin, the part of the operation for 7 days was higher part of the operation for 3 days. The results of the experiment are indicated in Fig I and Fig II.