• 폴리머
• /
• 제35권3호
• /
• pp.203-209
• /
• 2011

표면이 매끄럽고 돌기가 있는 2가지 HDPE 지오멤브레인 덤벨형 시료에 두께 10% 간격으로 10~90% 깊이의 노치를 가하여 실험에 사용하였다. ISO 10722에 의거하여 부가하중 횟수를 변화시켜 시공시 손상의 실내 모사시험을 HDPE 지오브레인에 실시하였으며, 부가하중 횟수가 시공시 손상에 미치는 영향을 비교하였다. 항복응력과 변형률은 노지 깊이가 커짐에 따라 감소하였다. 손상된 그리고 노치를 가한 지오멤브레인을 응력균열시험에 사용하였으며, $50{\pm}1^{\circ}C$에서 pH 4와 12 용액에 침지시켜 항복응력 변화에 따른 응력균열저항성을 NCTL 시험을 통하여 고찰하였다. 인장 강도의 35% 이상에서 지오멤브레인은 응력균열에 취약함을 나타냈으며, 손상을 받은 그리고 노치를 가한 지오멤브레인 모두 같은 경향을 나타내었다. 특별히 노치를 가한 지오멤브레인의 경우 각각의 응력균열 조건에서 시공에 의해 손상된 지오멤브레인보다 낮은 강도를 나타내었다.

• 한국의류산업학회지
• /
• 제7권1호
• /
• pp.96-100
• /
• 2005

The bleaching is one of the worst factors which leads to the damage of the human hair. The cuticle of the human hair is injured by the alkali that is one of the chief ingredients of a bleaching agent. The alkali component of the bleaching solution chemically reacts with human hair, reducing the tenacity and dissolving the cuticle layer. The purpose of this study is to examine the effects of bleaching time and temperature on the physical properties and morphology. The results were as follows. 1. The stress-strain curves for human hair indicated the three distinct regions, such as Hookean region, Yield region and post-Yield region. The tenacity of hair is reduced gradually with an increase of bleaching time. Under these same conditions, elongation of the hair increased. 2. The greatest drop in tenacity for hair occured between $40^{\circ}C$ and $60^{\circ}C$ of bleaching temperature. 3. Compared with the virgin hair, bleached hair showed a slower rate of weight reduction in the TGA thermogram. The rate decreased gradually as the bleaching time and temperature increased. 4. As the bleaching conditions reached time and temperature extremes, the human hair cuticle became more damaged. The cuticle layers seemed to have dissolved, as seen in the SEM photographs.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권9호
• /
• pp.613-620
• /
• 2020

The development of mobile Internet services allows more consumers to adopt smartphones as their primary communication device. This study focused on the application of the Technology Acceptance Model (TAM) to determine the willingness of batik and textile craftsmen to use smartphones. The population of this study was batik and textile craftsmen in the Bayat, Klaten, Central Java, Indonesia. A total sample of 243 people had answered 30 questions on the questionnaire with a 5-point Likert scale. The results of data analysis using GSCA software showed that, from eight hypotheses proposed, two hypotheses had not been supported. Technical support was not significant for the ease-of-use. It is because the damage experienced can be easily resolved by a repair shop. The findings reinforce the importance of training during the implementation of new technology. This training can make the users understand how to use new technology. The findings of this study strengthen the theory of TAM. Management support further influences the usefulness. This finding supports the theory of Igbaria technology acceptance. However, social influence did not significant influence the usefulness. This was because this study was conducted when the smartphone was no longer said to be a new technology.

• 한국염색가공학회지
• /
• 제22권2호
• /
• pp.110-117
• /
• 2010

Recently, there is a trend to utilize natural dyes in many dyeing fields. In this work, the effects of benzyl alcohol in human hair dyeing with cochineal, a natural dye, was investigated. We investigated the K/S value and color value of dyed hair, water retention of dyed hair, protein release-ability of dyed hair, and wash fastness of dyed hair according to dyeing time and temperature. The shade of dyed hair was reddish. By adding benzyl alcohol in cochineal dyeing, the dyeing rate was increased and the dyeing equilibrium was established at early stage. The water retention of dyed hair was increased and the protein release-ability of dyed hair was decreased, meaning that the hair was less damaged during dyeing, The dyed hair showed a good wash fastness.

• 한국염색가공학회지
• /
• 제20권2호
• /
• pp.59-65
• /
• 2008

The tannin acid and the enzymes have been used in order to improve the ruggedness in laundry and the absorption of dyes and pigments in the textile industry for several years. The enzyme processing on the protein fiber minimizes the damage of the entire fiber and improves the dyeability by effectively modifying only the hydrophobic surface. This study tried out the structural observation by applying the Castanea crenata sieb. et. zucc. containing abundant tannin to the hair dyeing as the natural dyeing pigment along with Protease of Rhizopus sp. The dyeability was improved as compared to the dyeing using only the synthetic tanning and iron mordant. When the depth of pigment was higher in accordance with the surface observation, the enzyme dissolution had impact on dyeing and so the keratin layer on the hair surface. Accordingly, it was found that the appropriate depth was between 0.01 and 0.03%. It was estimated that 0.1% protease would treated within 30min. Consequently, it would cause the good reaction with the functional group of tannin pigment.

• 한국의류학회지
• /
• 제25권1호
• /
• pp.173-182
• /
• 2001

The physical properties and biodegradability of cellulose fabrics, such as cotton and rayon, are expected to vary with textile care. In this study cotton and rayon fabrics were washed repeatedly with detergents, bleaches, or softeners. The changes of physical properties were investigated by measuring retention of breaking strength, shrinkage, handle, and the fiber surface was observed by SEM. The biodegradability of fabrics was also estimated by soil burial test. The results were as follows. Cotton fabrics laundered repeatedly by detergents and bleaches lost virtually no strength. The breaking strength of the rayon fabrics decreased by about 17%∼25% after repeated launderings. Shrinkage in weft direction was much larger than that in warp direction. Bending rigidities of both fabrics decreased remarkably within 10 wash cycles. Shear rigidity in cotton fabrics increased continuously with repeated washing cycles, however, that in rayon fabrics did not show any change as washing went on. Friction coefficient increased in both fabrics after 10 wash cycles, and this is thought to be attributed to the wrinkle, interlocking of hairs, surface damage resulted from repeated washings. In cotton fabrics made of staple yarns, short hairs on the yarn surface entangled together with repeated launderings. This resulted in the continuous increase in % shrinkage, shear rigidity, friction coefficient. Rayon fabrics made of filament yarns, however, did not show this phenomenon. Softener treated fabrics showed the lowest values in bending rigidity, shear rigidity and friction coefficient because the cationic surfactants adsorbed on the fiber surface behaved like lubricants. The biodegradability of fabrics was noticeably affected by the composition of washing solutions. The fabrics washed with detergents and bleaches were decomposed faster than those washed with the others were and the cotton fabrics washed with detergents and softeners hardly degraded. The fabrics soiled with milk were decomposed almost completely and those soiled with Palmitic acid did not degrade greatly.

• 공업화학
• /
• 제29권2호
• /
• pp.229-236
• /
• 2018

섬유산업에서 배출되는 오일미스트를 함유한 배기가스를 처리하기 위해 개발되어 실제 현장에 적용되고 있는 electric fume collector (EFC) 설비의 집진판 오염에 의한 성능저하를 개선하기 위한 맞춤형 세정제를 검토하였다. 집진판 표면의 오염물질은 오일미스트가 장기간 축적되면서 심하게 탄화되어 일반 세정제로는 쉽게 제거하기 어려운 상태였다. 오염물질의 특성과 집진판 모재의 손상 등을 고려하여, 알칼리, 알코올, 글리콜 및 비이온계 계면활성제로 구성된 최적의 세정제 성분 조성을 결정하였다. 현장실증실험에는 개발된 세정제 원액을 9.1%로 희석한 용액을 이용하였으며, 단순한 분무방식으로 심하게 점착된 집진판 표면의 오염물질을 성공적으로 제거할 수 있었다. 집진판의 세척에 의하여 EFC 설비의 배기가스 정화성능 개선효과도 크게 향상되었다.

• 한국재료학회지
• /
• 제2권5호
• /
• pp.366-374
• /
• 1992

S-2유리섬유직물과 폴리에스터 수지로 구성된 적충복합재료를 케블라 49 Thread로 1/2인치, 1인치 2인치 간격으로 스티칭하여 스티칭 간격에 따른 물성과 충격 강도의 변화로부터 최적스티칭 조건을 구하였으며 또한 스티칭하지 않은 적층복합재료와의 물성차를 비교연구하였다. 인장실험과 3점굽힘실험을 통해 시편의 종류별 기본 물성을 알아보았고, 234.7J의 충격에너지를 가해 시편의 파단 현상과 에너지 흡수 능력을 조사하였다. 파단에너지의 약 50% 정도인 110.2J의 충격에너지로 3회 반복실험하여 시편의 손상정도와 충격강도를 비교 검토하였다. 인장실험과 굽힘 실험의 결과 1인치 간격으로 스티칭한 시편이 가장 높은 강도를 보였으며, 충격실험에서도 가장 뛰어난 에너지 흡수능력 및 손상에 대한 저항을 보였다. 반복충격 실험의 결과 스티칭하지 않은 시편은 현저한 충격강도의 감소를 보인 반면 스티칭한 시편은 반복충격에도 에너지 흡수능력이 우수하게 유지되었다. C-scanning으로 손상부위를 관찰한 결과 스티칭으로 인해 손상영역의 확산이 억제되어 현저히 감소함을 보여주었다. 스티칭 간격이 너무 조밀한 경우 강도의 향상보다는 스티칭으로 인한 손상이 더 커져서 1/2인치 간격으로 스티팅한 시편의 경우는 인장강력이나 충격에너지 흡수가 스티칭하지 않은 시편에 비해 오히려 감소하는 결과를 나타내었다. 그러나 이러한 감소에도 불구하고 외부충격에 의한 손상영역의 확산은 효과적으로 억제되어 국부적인 손상만이 발생함을 알 수 있었다.

• 보존과학회지
• /
• 제30권4호
• /
• pp.353-364
• /
• 2014

포름알데히드는 전시 수장 공간에서 농도와 발생빈도가 높아 전통직물(천연염색)에 대한 손상 개연성이 있다. 본 연구는 견, 면, 모시, 삼베의 무염색, 천연염색(적색, 황색, 청색, 흑색) 시편을 대상으로 포름알데히드 0.5, 1, 10, 100, 500ppm 농도에서의 손상, 손상농도 500ppm에서 온습도 조건에 따른 손상과 열화상태에서의 손상을 광학적, 화학적, 물리적 측정방법으로 평가하였다. 이 결과, 포름알데히드 농도 500ppm에서 일부 직물의 색차, 변퇴색등급, 포름산이온 농도, pH가 변화하였으며, 고온 고습조건($30^{\circ}C$, 80%), 고습조건($25^{\circ}C$, 80%)에서는 색차, 변퇴색등급, 포름산이온 농도가 2배 가중되었다. 그러나, 열화직물은 열화정도, 열화 생성물질로 인해 포름알데히드에 의한 손상변화가 미미하였다. 이를 통해 포름알데히드에 의한 전통직물의 손상, 손상농도, 손상가중 조건, 열화상태에서의 손상을 확인하였으며, 포름알데히드는 적색직물의 황변, 열화직물의 황변 탈색, 포름산은 전체직물의 탈색에 영향을 미치는 것으로 나타났다.

• 한국염색가공학회지
• /
• 제4권4호
• /
• pp.73-80
• /
• 1992

The influence of four types of reactive dyes that are different in reactive group on silk fabric were investigated at three different temperatures, 5$0^{\circ}C$, 7$0^{\circ}C$, 9$0^{\circ}C$ and the pH range from 7.0 to 11.0. The amount of absorption and fixation showed the optimum condition. The damage of silk during dyeing was determined by the change of physical properties. The results are given as follows: 1. The amount of dye fixed on fabrics at constant pH varied upon the reactivity of dyes. The affinity of dyes for silk fabrics were in order of Lanasol>Procion>Remazol>Cibacron. 2. The percentage of dye fixation on fabrics showed different tendency with temperature. The dye fixation of Cibacron and Procion was decreased above 7$0^{\circ}C$ because of the influence of hydrolysis. The dye fixation of Lanasol and Remazol was increased with the increase of temperature. This showed that temperature did not affect on hydrolysis. 3. The tensile strength of dyed fabric decreased with increasing pH and temperature owing to high temperature and alkaline damage on silk fabric. 4. The optimum conditions of dyeing silk with reactive dyes were as follows: Cibacron -7$0^{\circ}C$, pH 9.0, Procion-5$0^{\circ}C$, pH 7.0, Remazol-5$0^{\circ}C$, pH 8.0, and Lanasol-9$0^{\circ}C$, pH 9.0.