• Earthquakes and Structures
• /
• 제7권6호
• /
• pp.937-953
• /
• 2014

A semi-active control platform comprising the mechanical model of magnetorheological (MR) dampers, the bang-bang control law and damage material models is developed, and the simulation method of steel plate shear wall (SPSW) and optimization method for capacity design of MR dampers are proposed. A 15-story steel frame-SPSW structure is analyzed to evaluate the seismic performance of nonlinear semi-active controlled structures with optimal designed MR dampers, results indicate that the control platform and simulation method are stable and fast, and the damage accumulation effects of uncontrolled structure are largely reduced, and the seismic performance of controlled structures has been improved.

• Smart Structures and Systems
• /
• 제15권1호
• /
• pp.227-244
• /
• 2015

This study develops a two stage procedure to identify the structural damage based on the optimized artificial neural networks. Initially, the modal strain energy index (MSEI) is established to extract the damaged elements and to reduce the computational time. Then the genetic algorithm (GA) and artificial neural networks (ANNs) are combined to detect the damage severity. The input of the network is modal strain energy index and the output is the flexural stiffness of the beam elements. The principal component analysis (PCA) is utilized to reduce the input variants of the neural network. By using the genetic algorithm to optimize the parameters, the ANNs can significantly improve the accuracy and convergence of the damage identification. The influence of noise on damage identification results is also studied. The simulation and experiment on beam structures shows that the adaptive parameter selection neural network can identify the damage location and severity of beam structures with high accuracy.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.7-12
• /
• 2000

The automatic turbine startup system provides turbine control based on thermal stress. During the startup, control system monitors and evaluates main components of turbine using damage mechanism and life assessment. In case of valve chest, the temperature of inner/outer wall is measured by thermo-couples and the safety of these values are evaluated by using allowable ${\Delta}T$ limit curve during the startup. Because allowable ${\Delta}T$ limit curve includes life assessment, it is possible to apply this curve to turbine control system. In this paper, low cycle fatigue damage and combined rupture and low cycle fatigue damage criterion proposed for yielding the allowable ${\Delta}T$ limit curve of CV(control valve) chest. To calculate low cycle fatigue damage, the stress analysis of valve chest has peformed using FEM. Automatic turbine startup to assure service life of CV was achieved using allowable ${\Delta}T$ limit curve.

• 대한기계학회논문집A
• /
• 제26권1호
• /
• pp.1-6
• /
• 2002

The automatic turbine startup system provides turbine control based on thermal stress. During the startup, control system monitors and evaluates main components of turbine using damage mechanism and life assessment. In case of valve chest, the temperature of inner/outer wall is measured by thermo-couples and the safety of these values are evaluated by using allowable △T limit currie during the startup. Because allowable ΔT limit curve includes life assessment, it is possible to apply this curve to turbine control system. In this paper, low cycle fatigue damage, combined rupture and low cycle fatigue damage criterion were proposed for yielding the allowable ΔTf limit curve of CV(control valve) chest. To calculate low cycle fatigue damage, the stress analysis of valve chest has been performed using FEM. Automatic turbine startup to assure service life of CV was achieved using allowable ΔT limit curve.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2001년도 학술대회지
• /
• pp.113-118
• /
• 2001

사용중인 교량의 안전성, 사용성, 내구성을 확보하기 위한 시발점은 교량에 대한 점검과 진단이다. 본 논문에서는 최근 개정된 시설물 안전진단에 관한 특별법에 제시된 점검주기와 독일의 점검주기를 비교하고, 외국의 손상 보고서에 나타난 손상발견시기를 분석하였으며, 분석 결과를 기초로 국내 진단 주기의 재조정을 제안하였다. 이를 위해 비교 대상인 양국의 교량 현황을 살펴보고, 유지관리 체계와 비용을 객관적 비교근거로 제시하였다.

• 한국기계기술학회지
• /
• 제13권3호
• /
• pp.87-92
• /
• 2011

This study analyzes structural stress and fatigue on control arm of automobile under nonuniform load. Maximum equivalent stress at bolt part is shown with 419.1MPa and the corner is deformed with maximum displacement of 1.1628mm. Among 3 cases of nonuniform fatigue loads applying on control arm, 'SAE bracket history' with the severest change of load becomes most unstable but 'Sample history' becomes most stable. In case of 'Sample history' with the average stress of $-10^5MPa$ to $10^5MPa$ and the amplitude stress of 0 MPa to $10^5MPa$, the possibility of maximum damage becomes 3%. This stress state can be shown with 6 times more than the damage possibility of 'SAE bracket history' or 'SAE transmission'. Safety and durability on automobile can be effectively improved by applying the fatigue analysis result on control arm.

• 대한원격탐사학회지
• /
• 제34권6_1호
• /
• pp.1033-1039
• /
• 2018

우리나라는 매년 여름철마다 태풍과 집중호우가 함께 발생하는 홍수로 인해 인명 및 재산피해가 발생한다. 특히 임진강 유역은 급경사와 좁은 하도인 상류부와, 낮은 평지인 하류부로 되어 있어 홍수에 취약한 지형을 가지고 있다. 게다가 북한 지역의 임진강 상류에 위치한 대형 댐인 황강댐에서 여름철 마다 무단방류로 인하여 피해가 발생하였다. 이런 홍수 피해를 방지하기 위해 우리나라에서는 2010년 군남홍수조절지를 건설하여 홍수피해를 방지하고 있다. 하지만 홍수조절지의 건설 이후에도 홍수조절능력이 황강댐의 최대 저수량의 20%밖에 미치지 못한다. 이에 이 연구에서는 경기북부지역의 집중호우시 발생할 수 있는 홍수 피해 위험지역을 산정하기 위하여 LAHARZ_py 프로그램을 이용하여 피해예상지역을 산출하였다. 그 결과 군남홍수조절지의 홍수조절능력을 넘는 황강댐의 방류가 발생할 시에 경기도 연천군과 파주시에 피해가 예상되었다. 추후 이 연구는 홍수 피해를 대비하기 위한 자료로 유용할 것으로 판단된다.

• 한국응용곤충학회지
• /
• 제40권4호
• /
• pp.315-319
• /
• 2001

1998~2000년에 걸쳐 담배포장에서 거세비나방류 피해와 방제 실태를 조사하고 효율적인 방제 대책을 제시하였다. 담배 산지에서 거세미나방류 피해를 조사하고 경작자와 면담한 결과 거세미나방류 피해는 대체로 경비하였으며, 방제를 요하는 것으로 추정되는 포장은 조사포장 중 9.0~10.2%였으나, 대부분의 면담자들이 담배 이식 전 또는 이식 당시 입제의 살충제를 살포한다고 하였다. 피해발생시기 및 가해습성에 관한 조사 결과로 미루어보면 이식 후 약 2% 이상의 피해주율을 보인 포장에서 유제 또는 수화제를 담배의 지제부 및 주변 토양에 분무하는 것이 보다 효율적인 방제법으로 판단된다.

• Journal of Ginseng Research
• /
• 제14권3호
• /
• pp.421-426
• /
• 1990

Field and laboratory works were conducted to Investigate the life history, ginseng damage and chemical control effect of the field slug, Deroceras varians A. Adams. D. varians laid eggs from April to June, but a small number of eggs were also found from July to September in the field. Most young slugs grew through the slimmer months to maturity by October. overwintered beneath the moist soil surface, and began feeding and egg-laying in the following April. indicating that D varians have a life cycle in a year. Damage of ginseng plants by D. varina occurred mainly from late April to mid May in the 3rd to 5th year ginseng fields with rice-straw mulching. It seems that this damage is caused by the adults in oviposition periods and related to rice-straw mulching of ginseng fields. In the experiment, ethoprop 5% granule and metaldehyde 6% bait showed relatively high effectiveness in the control of D. varians adults. Bordeaux mixture was more effective when the chemical was sprayed after infestation of the slug than before the infestation and when the 6-12 mixture was used.

• Structural Engineering and Mechanics
• /
• 제44권2호
• /
• pp.179-196
• /
• 2012

An eigenspace projection clustering method is proposed for structural damage detection by combining projection algorithm and fuzzy clustering technique. The integrated procedure includes data selection, data normalization, projection, damage feature extraction, and clustering algorithm to structural damage assessment. The frequency response functions (FRFs) of the healthy and the damaged structure are used as initial data, median values of the projections are considered as damage features, and the fuzzy c-means (FCM) algorithm are used to categorize these features. The performance of the proposed method has been validated using a three-story frame structure built and tested by Los Alamos National Laboratory, USA. Two projection algorithms, namely principal component analysis (PCA) and kernel principal component analysis (KPCA), are compared for better extraction of damage features, further six kinds of distances adopted in FCM process are studied and discussed. The illustrated results reveal that the distance selection depends on the distribution of features. For the optimal choice of projections, it is recommended that the Cosine distance is used for the PCA while the Seuclidean distance and the Cityblock distance suitably used for the KPCA. The PCA method is recommended when a large amount of data need to be processed due to its higher correct decisions and less computational costs.