• Earthquakes and Structures
• /
• 제7권3호
• /
• pp.251-269
• /
• 2014

To investigate the seismic performance and to obtain quantitative parameters for the requirement of performance-based bridge seismic design approach, 12 reinforced concrete (RC) hollow rectangular bridge column specimens were tested under constant axial load and cyclic bending. Parametric study is carried out on axial load ratio, aspect ratio, longitudinal reinforcement ratio and transverse reinforcement ratio. The damage states of these column specimens were related to engineering limit states to determine the quantitative criteria of performance-based bridge seismic design. The hysteretic behavior of bridge column specimens was simulated based on the fiber model in OpenSees program and the results of the force-displacement hysteretic curves were well agreed with the experimental results. The damage states of residual cracking, cover spalling, and core crushing could be well related to engineering limit states, such as longitudinal tensile strains of reinforcement or compressive strains of concrete, etc. using cumulative probability curves. The ductility coefficient varying from 3.71 to 8.29, and the equivalent viscous damping ratio varying from 0.19 to 0.31 could meet the requirements of seismic design.

• 한국컴퓨터정보학회논문지
• /
• 제24권8호
• /
• pp.37-43
• /
• 2019

The existing smart farm technology has been systematized for the mass production rather than the consumer. There are many problems such as economical aspect to apply to actual rural environment due to aging. The purpose of this study is to apply smart farm technology based on the applicability of population aged in rural areas. Due to the heat wave, the crops in general greenhouse cultivation facilities suffered from damage such as sunlight damage. To minimize such damage, adjust the temperature and humidity environment or install a light-shielding film. However, the workers in the rural areas are aging and the elderly who are farming alone have a lot of difficulties in doing so. In the case of people with weak physical strength, there is a danger that they may lead to safety accidents when carrying heavy loads. In this paper, we propose 'Smart Palm capable of automatic transportation function', applying small smart vehicles that follow workers to existing smart farms to improve and prevent these problems. It is a smart farm that performs the control functions of the existing smart greenhouse environment, installs the rail for each trough, and has a vehicle that follows the worker. The smart app can directly control the greenhouse and the vehicle remotely manually.

• 한국전산유체공학회지
• /
• 제15권2호
• /
• pp.7-13
• /
• 2010

Flight vehicles such as wheel wells and bomb bays have many cavities. The flow around a cavity is characterized as an unsteady flow because of the formation and dissipation of vortices brought by the interaction between the free stream shear layer and the internal flow of the cavity. The resonance phenomena can damage the structures around the cavity and negatively affect the aerodynamic performance and stability of the vehicle. In this study, a numerical analysis was performed for the cavity flows using the unsteady compressible three-dimensional Reynolds-Averaged Navier-Stokes (RANS) equation with Wilcox's turbulence model. The Message Passing Interface (MPI) parallelized code was used for the calculations by PC-cluster. The cavity has aspect ratios (L/D) of 5.5 ~ 7.5 with width ratios (W/D) of 2 ~ 4. The Mach and Reynolds numbers are 0.4 ~ 0.6 and $1.6{\times}10^6$, respectively. The occurrence of oscillation is observed in the "shear layer and transient mode" with a feedback mechanism. Based on the Sound Pressure Level (SPL) analysis of the pressure variation at the cavity trailing edge, the dominant frequencies are analyzed and compared with the results of Rossiter's formula. The dominant frequencies are very similar to the result of Rossiter's formula and other experimental datum in the low aspect ratio cavity (L/D = ~4.5). In the high aspect ratio cavity, however, there are other low dominant frequencies of the leading edge shear layer with the dominant frequencies of the feedback mechanism.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 추계학술대회논문집
• /
• pp.13-18
• /
• 2009

Flight vehicles such as wheel wells and bomb bays have many cavities. The flow around a cavity is characterized as an unsteady flow because of the formation and dissipation of vortices brought about by the interaction between the free stream shear layer and the internal flow of the cavity. The resonance phenomena can damage the structures around the cavity and negatively affect the aerodynamic performance and stability of the vehicle. In this study, a numerical analysis was performed for the cavity flows using the unsteady compressible three-dimensional Reynolds-Averaged Navier-Stokes (RANS) equation with Wilcox's turbulence model. The Message Passing Interface (MPI) parallelized code was used for the calculations by PC-cluster. The cavity has aspect ratios (L/D) of 2.5 ~ 7.5 with width ratios (W/D) of 2 ~ 4. The Mach and Reynolds numbers are 0.4 ~ 0.6 and $1.6{\times}106$, respectively. The occurrence of oscillation is observed in the "shear layer and transient mode" with a feedback mechanism. Based on the Sound Pressure Level (SPL) analysis of the pressure variation at the cavity trailing edge, the dominant frequencies are analyzed and compared with the results of Rossiter's formula. The dominant frequencies are very similar to the result of Rossiter's formula and other experimental data in the low aspect ratio cavity (L/D = ~ 4.5). In the large aspect ratio cavity, however, there are other low dominant frequencies due to the leading edge shear layer with the dominant frequencies of the feedback mechanism. The characteristics of the acoustic wave propagation are analyzed using the Correlation of Pressure Distribution (CPD).

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.347.1-347.1
• /
• 2016

Screen printing is commonly used to form the electrode for crystalline silicon solar cells. However, it has caused high resistance and low aspect ratio, resulting in decrease of conversion efficiency. Accordingly, Ni/Cu/Ag plating method could be applied for crystalline silicon solar cells to reduce contact resistance. For Ni/Cu/Ag plating, laser ablation process is required to remove anti-reflection layers prior to the plating process, but laser ablation results in surface damage and then decrease of open-circuit voltage and cell efficiency. Another issue with plating process is ghost plating. Ghost plating occurred in the non-metallized region, resulting from pin-hole in anti-reflection layer. In this paper, we investigated the effect of Ni/Cu/Ag plating on the electrical properties, compared to screen printing method. In addition, phosphoric acid layer was spin-coated prior to laser ablation to minimize emitter damage by the laser. Phosphorous elements in phosphoric acid generated selective emitter throughout emitter layer during laser process. Then, KOH treatment was applied to remove surface damage by laser. At this step, amorphous silicon formed by laser ablation was recrystallized during firing process and remaining of amorphous silicon was removed by KOH treatment. As a result, electrical properties as Jsc, FF and efficiency were improved, but Voc was lower than screen printed solar cells because Voc was decreased due to surface damage by laser process. Accordingly, we expect that efficiency of solar cells could be improved by optimization of the process to remove surface damage.

• 대한토목학회논문집
• /
• 제33권3호
• /
• pp.1077-1086
• /
• 2013

최근 지구는 이상기후를 원인으로 한 자연재난 발생에 의해 경제적 손실 및 인명 피해가 빈번하게 발생하고 있다. 본 연구의 목적은 자연재난의 하나인 설해 적응에 관한 것으로 도로가 위치한 지역의 지형적 특성을 중심으로 설해취약지역을 선정하고 그 위험정도를 제시하는 것이다. 연구지역인 부산광역시의 경우 도심 내 구릉성 산지가 많이 분포하고 있어 도로의 경사가 급하고 많은 산복도로가 형성되어 있어 폭설에 취약한 구조로 되어 있다. 최근에는 폭설이라 할 수 없는 적은 적설량에도 도로교통이 마비되고 학교가 휴교하는 등 큰 혼란이 발생하였다. 지구온난화에 의한 이상기후는 예측이 어렵고 그 피해는 매우 큼으로 관련 사회기반시설에 대한 적응정책이 마련되어야 한다. 따라서 본 연구는 연구지역의 도로가 위치한 지형적 특성들을 중심으로 설해취약지역을 선정하고 행정동 단위 위험도 평가를 통한 위험정도를 나타냄으로 설해 적응정책수립 시기초자료로서 활용될 수 있도록 하였다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.539-546
• /
• 1996

The physical condition of rapeseed delivered to fat industry plants plays a significant role in the formation of the qualitative features of the raw material for oil production and, consequently , of the oil itself. Rapeseed is stored in silos , frequently for months, before it is subjected to processing. During the long storage, the conditions of the seed cover is very important, as the seed cover provides natural protection of the seed against the effect of the environment. Seeds with damaged seed cover are more easily affected by mildew, and the rate of chemical processes. Deteriorating the quality of oil contained in the cotyledons is faster in such seeds. Cracked seed covers facilitates also the growth and development of microorgaism. So as rapeseed damage occurring inthe course of harvest and the post-harvest processing have a negative effect of the quality and quantity of oil the sees contain. The study presented here was aimed at examining the typical process of purcha ing and handling of rapeseed in fat industry plants, in the aspect of the occurrence of mechanical damage to the seeds. Special attention was paid to the condition of rapeseed immediately after combine harvesting : next , the successive stages of technological handling of the seed were examined. observing the operation parameters of the particular machinery and equipment in order to identify those operations which caused deterioration in the quality of the material (sees). Seed samples were taken successively from the following the hopper, prior to cleaning , after cleaning , prior to drying , after drying, from dry rape silo. The total level of damage increased through the handling. The content of unusable contaminants had the tendency to decrease in the successive operations. though the actual values still exceeded levels permitted by standards. The study allow to indicate the operation fo postharvest technological process, which cause the most seed damage as well as gave quantita ive description of the losses occurred.

• Composites Research
• /
• 제15권3호
• /
• pp.11-17
• /
• 2002

본 연구에서는 분산형 강화복합재료에 균열이 발생하면 하중부하능력이 감소와 더불어 재료의 손상을 초래할 수 있어 재료의 완전한 게재물과 균열이 존재한 게재물이 있는 경우를 상정하여 하중부하능력과 탄성 음력분포를 평가한다. 무한체가 전단음력을 받을 때 완전한 게재물과 균열이 내재한 경우에 대하여 3차원 유한요소해석이 수행되어 완전한 게재물의 경우는 게재물의 영역의 음력은 동일하고 게재물의 계면은 다소 불균일하게 나타났다. 그리고 균열이 내재한 경우에는 균열주변에는 음력이 집중되는 경우를 볼수 있을 뿐만아니라 아주 복잡한 분포를 볼수 있었다. 불균질물의 평균응력은 하중부하능력으로 표현이 가능하였고 완전만 게재물과 균열의 경우도 균열손상에 의해 하중부하능력의 차이를 볼 수 있었다. 특히, 균열이 내재한 경우에 에스펙터비(aspect ratio)가 증가할수록 하중부하능력이 증가함을 알 수 있었다.

• 보존과학회지
• /
• 제25권2호
• /
• pp.131-145
• /
• 2009

고령 양전동암각화는 녹색 사암으로 구성된 너비 6m 높이 3m의 암반의 절리면에 겹동그라미(3점)와 방패무늬(30점)의 그림들이 있다. 구성암석의 주 구성광물은 석영, 장석 및 녹니석이며, 교질물인 점토광물 중 녹니석이 대부분이나 일라이트와 소량의 방해석도 산출된다. 이들 점토광물들은 구성광물을 피복 및 성분을 교대하거나 공극을 충진하는 양상으로 산출된다. 수용성 염과 암석의 풍화현상과의 관계를 포함한 훼손양상과 암각화가 그려진 암반의 사면안정성을 조사하였다. 훼손양상은 주로 표면박리, 입자박락, 균열 및 파손 등이다. 그리고 절리와 균열이 발달한 암반은 낙석의 가능성이 있는 것으로 해석된다. 보존을 위해서는 균열 및 파손 부위에 대한 접착처리와 약해진 표면층에 강화처리가 필요하다.

• 한국농림기상학회지
• /
• 제18권3호
• /
• pp.162-169
• /
• 2016

기준기상위험이란 한 지역의 평년기후조건이 작물재배에 미칠 수 있는 '농업기상학적 피해가능성'으로서, 동일 작물 재배 시 지역에 따른 재해위험을 비교하는 기준이 된다. 지구온난화로 인하여 겨울 온도는 상승할 것으로 예상되지만, 기상이변의 빈도 또한 늘어날 것으로 전망되기 때문에 미래 기후조건에서 과수의 동해, 상해 등 저온에 의한 재해위험이 주목 받고 있다. 그러나 기후의 변화는 과수 생물계절도 변화시키므로 기상조건에 근거한 단순한 재해위험 전망은 기후변화적응의 실용측면에서 별 도움이 되지 못한다. 본 연구에서는 전국 주요 지역의 과거 및 기후변화시나리오를 이용하여 배, 복숭아, 사과의 생물계절을 예측하고 생육단계별 기온과의 상호작용에 근거하여 저온 유래 기준기상위험을 계산함으로써 미래의 재해가능성을 전망하였다. 휴면해제일은 미래로 갈수록 늦어질 것으로 전망되었으며, 발아일과 개화일의 경우 빨라질 것으로 예상되었다. 대구, 전주, 목포의 경우 휴면해제일의 지연 정도가 미래로 갈수록 커졌으며 발아일과 개화일의 경우 서울, 인천 지역이 다른 지역에 비해 늦게 나타났다. 서울과 인천, 대구와 전주, 부산과 목포가 서로 비슷한 양상을 나타내었다. 휴면기 동안에는 전 지역이 동해에 안전하였으나 휴면해제-발아기 동안에는 전 지역이 동해에 취약하였고, 발아기-개화기의 위험은 미래로 갈수록 대체로 낮아졌지만 지역에 따라 위험이 커지는 곳도 있었다.