• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.03a
• /
• pp.119-126
• /
• 2002

Fractures, especially faults have most significant influence on the difficulties encountered in various engineering and mining works, because they can give rise to inevitable reductions in shear strength as well as large increase in permeability. Thus, before underground access is possible, it is desirable to estimate the distribution and geometry of fractures in advance, if reliable structural data from e.g. Televiewer tool are available. To this end, fracture face mapping is just the evaluation method used to form a fracture image determined by intersecting of each fracture plane with a selected plane section of a rock mass, assuming that all fractures be planar with fixed-aperture. Although many fractures are geometrically complex and others are altered chemically, according to the abundant experiments in recent years, it would seem that the technique could be applied to benefit the design of numerous engineering works such as slope stability, tunnel excavations, dam foundation and diverse environmental works. This paper presents at first an evaluation algorithm for fracture face mapping and then concludes with various representative examples of applications.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.2
• /
• pp.245-258
• /
• 2016

In this study the geotechnical system response probabilities (SRP) of the failure modes caused by the interal erosion in three dams with different histories of defects in Korea were analyzed via the internal erosion toolbox developed by USACE. The calculated values of SRP were compared with the values reported for other dams in worldwide and also the statistics on the past failures of dams and embankments in Korea. The calculated values of SRP related to the internal erosion adjacent to the conduits or spillway structures are as high as in the order of $10^{-5}$ that is significantly greater than the SRP values related to other mechanisms of internal erosion. The statistical data showing that the interal erosion adjacent to the structure is the most frequent cause of the failure of the dam in Korea could be a collateral evidence of this finding. In contrast, the values of SRP related to the internal erosion through foundation, one of the major causes of dam failure in worldwide, are relatively as low as in the order of $10^{-7}$. This result could be comparable with the rareness of the failure cases of dam caused by the internal erosion through foundation in Korea.

• The Journal of Engineering Geology
• /
• v.15 no.1
• /
• pp.77-86
• /
• 2005

CFRD(Concrete Faced Rockfill Dam) is in widespread use because this type of dam has superior characteristics in structural, material aspects comparing with earth cored rockfill dam. On this paper, up-to-date re-searches and techniques are summed up to be available for future needs in design and construction of CFRD. For example, such items as embankment using weak rock, experience of sand-gravel fill CFRD, connecting slab applied between plinth and face slab, raising experience of old dm, inverse filtration problem, environmental friendly zone, thickness and reinforcing of face slab, alluvial foundation treatment, and curb element method, are summarized for understanding of related engineers.

• Journal of the Korean Society of Safety
• /
• v.35 no.5
• /
• pp.30-38
• /
• 2020

In order to construct a dam, the diversion facility such as cofferdam and a diversion tunnel should be installed in advance. And size of a cofferdam depends on type of a main dam. According to the Korea Dam Design Standard, if the main dam is a concrete dam, design flood of the cofferdam is 1~2 years flood frequency. This means that overflow of the cofferdam occurs one time for 1 or 2 years, therefore, stability of the cofferdam should be secured against any overflow problem. In this study, failure probability analysis for the concrete cofferdam is performed considering the overflow. First of all, limit state function of the concrete cofferdam is defined for overturning, sliding and base pressure, and upstream water levels are set as El. 501 m, El. 503 m, El. 505 m, El. 507 m. Also, after literature investigation research, probabilistic characteristics of various random variables are determined, the failure probability of the concrete cofferdam is calculated using the Monte Carlo Simulation. As a result of the analysis, when the upstream water level rises, it means overflow, the failure probability increases rapidly. In particular, the failure probability is largest in case of flood loading condition. It is considered that the high upstream water level causes increase of the upstream water pressure and the uplift pressure on the foundation. In addition, among the overturning, the sliding and the base pressure, the overturing is the major cause for the cofferdam failure considering the overflow.

• Geomechanics and Engineering
• /
• v.39 no.3
• /
• pp.283-303
• /
• 2024

In large-scale engineering construction, there are many cases of highly concealed adverse geological phenomena (HCAGP) at certain scale that are not revealed until excavation. It is crucial to ascertain their geological characteristics and rapidly formulate treatment since they often have enormous negative impacts on the project. However, conventional exploration and evaluation methods are not suitable for HCAGP due to the long acquisition time and strict requirements. Therefore, this paper proposes a dynamic-tracking investigation and evaluation method (DTIEM), which carries out a series of fast and effective techniques, including down-the-hole (DTH) drilling, cross-inclined holes, seismic tomography and P-wave velocity (V_P) tests, for preliminary data of HCAGP. Then, an initial treatment plan is proposed to guide the construction. Subsequently, the initial data of the HCAGP are tracked and revised until the end of construction. This method was applied to a deep groove at a hydropower station, which was exposed when the excavation of dam section 11. The results show that by using the DTIEM, the preliminary engineering characteristics of the deep groove were obtained quickly. The rock mass quality of the top deep groove was grade III₂ with 9.82 GPa, the middle part was grade III₁ with 15.07 GPa, and the bottom part was grade II with 19.68 GPa. The quality of rock mass gradually increases with the increase of depth. From the numerical simulation, the maximum additional displacement is about 20 mm at the dam crest, 4 ~ 7 mm at the dam heel, and 2 ~ 5 mm at the dam toe. The numerical simulation and monitoring results show that the stress and strain of the dam and foundation are within a safe range in each stage. Thus, the proposed method is feasible.

• Structural Engineering and Mechanics
• /
• v.33 no.4
• /
• pp.407-428
• /
• 2009

The effects of the uniform and spatially varying ground motions on the stochastic response of fluid-structure interaction system during an earthquake are investigated by using the displacement based fluid finite elements in this paper. For this purpose, variable-number-nodes two-dimensional fluid finite elements based on the Lagrangian approach is programmed in FORTRAN language and incorporated into a general-purpose computer program SVEM, which is used for stochastic dynamic analysis of solid systems under spatially varying earthquake ground motion. The spatially varying earthquake ground motion model includes wave-passage, incoherence and site-response effects. The effect of the wave-passage is considered by using various wave velocities. The incoherence effect is examined by considering the Harichandran-Vanmarcke and Luco-Wong coherency models. Homogeneous medium and firm soil types are selected for considering the site-response effect where the foundation supports are constructed. A concrete gravity dam is selected for numerical example. The S16E component recorded at Pacoima dam during the San Fernando Earthquake in 1971 is used as a ground motion. Three different analysis cases are considered for spatially varying ground motion. Displacements, stresses and hydrodynamic pressures occurring on the upstream face of the dam are calculated for each case and compare with those of uniform ground motion. It is concluded that spatially varying earthquake ground motions have important effects on the stochastic response of fluid-structure interaction systems.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11a
• /
• pp.223-228
• /
• 2000

The current slope stability analysis of a filldam is based on the limit equilibrium method, and in calculation of safety factor during earthquake, adopts the seismic intensity method in which it considers a uniform seismic force from dam foundation to crest. However the observed behaviour of filldam during earthquake shows some different behaviour in that at the crest the measured acceleration is usually several times the ground acceleration. In this study, slope stability calculations of a filldam are provided based on the modified seismic intensity method, which can take into account the amplification phenomena of acceleration in the upper part of dam. And also the results of calculations are compared with that of current seismic intensity method.

• Structural Monitoring and Maintenance
• /
• v.3 no.2
• /
• pp.129-144
• /
• 2016

We present a methodology to validate with monitoring data finite element models of existing concrete dams: numerical analyses are performed to assess the structural response under the effects of seasonal loading conditions, represented by hydrostatic pressure on the upstream-downstream dam surfaces and thermal variations as recorded by a thermometers network. We show that the stiffness effect of the rock foundation and the surface degradation of concrete due to aging are crucial aspects to be accounted for a correct interpretation of the real behavior. This work summarizes some general procedures developed by this research group at Politecnico di Milano on traditional static monitoring systems and two significant case studies: a buttress gravity and an arch-gravity dam.

• Journal of the Korea Concrete Institute
• /
• v.16 no.6 s.84
• /
• pp.841-850
• /
• 2004

The modeling of uplift pressure within dam, on the foundation on which it was constructed, and on the interface between the dam and foundation is a critical aspect in the analysis of concrete gravity dams, i.e. crack stability in concrete dam can correctly be predicted when uplift pressures are accurately modelled. Current models consider a uniform uplift distribution, but recent experimental results show that it varies along the crack faces and the procedures for modeling uplift pressures are well established for the traditional hand-calculation methods, but this is not the case for finite element (FE) analysis. In large structures, such as dams, because of smaller size of the fracture process zone with respect to the structure size, limited errors should occur under the assumptions of linear elastic fracture mechanics (LEFM). In this paper, the fracture behaviour of concrete gravity dams mainly subjected to uplift Pressure at the crack face was studied. Triangular type, trapezoidal type and parabolic type distribution of the uplift pressure including uniform type were considered in case of evaluating stress intensity factor by surface integral method. The effects of body forces, overtopping pressures are also considered and a parametric study of gravity dams under the assumption of LEFM is performed.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.1210-1224
• /
• 2009

The present paper illustrates the outcome of the monitoring of the consolidation behavior of a soft foundation soil under a large submerged sand embankment. Measurements of settlements and excess pore water pressures showed a good agreement with predictions evaluated using the large strain consolidation theory. Soft soil improvement by means of deep mixing has been optimized. Moreover, the principles and developments of underwater geosynthetics applications are discussed.