• The Korean Journal of Pesticide Science
• /
• v.16 no.1
• /
• pp.43-53
• /
• 2012

In order to monitor the levels of pesticides in environment-friendly stalk and stem vegetables and leafy vegetables selling at markets in Korea. A total of 637 (395 organic agricultural products, 242 pesticide-free agricultural products) samples of 21 stalk and stem vegetables and leafy vegetables were collected twice from markets in July and August 2010 in Korea. Pesticide residues in samples were analyzed by multiresidue method for 240 pesticides using GC-ECD/NPD and HPLC-DAD/FLD. The suspected-pesticides were confirmed with a GC-MSD. As a result of analysis, six pesticides were detected from eight samples, representing a detection rate of 1.3% and amounts of pesticide residues in samples were as follows: alachlor 0.043, chlorfenapyr 0.022-0.324, diazinon 0.024, dicofol 0.009-0.138, dithiopyr 0.008, metolachlor 0.025 mg/kg. Their residue levels were below the MRLs. Estimated daily intakes (EDIs) of the pesticides detected from stalk and stem vegetables and leafy vegetables were less than 25% of their acceptable daily intakes (ADIs), representing that residue levels of the pesticides detected were evaluated as safe for consumption. However, five samples containing pesticide residues were unsuitable environment-friendly products because of pesticides detected more than their 10% MRLs in organic and pesticide-free agricultural products.

• Journal of Korea Water Resources Association
• /
• v.38 no.7 s.156
• /
• pp.517-526
• /
• 2005

In Korea, the methods of estimating groundwater recharge can categorized into two groups. One is baseflow separation method by means of groundurater recession curve, the other is water level fluctuation method by using the data from groundwater monitoring wells. Baseflow separation method is based on annual recharge and lumped concept, and water-table fluctuation method is largely dependent on monitoring wells rather than water budget in watershed. However, groundwater recharge rate shows the spatial-temporal variability due to climatic condition, land use and hydrogeological heterogeneity, these methods have various limits to deal with these characteristics. For this purpose, the method of estimating daily recharge rate with spatial variability based on distributed rainfall-runoff model is suggested in this study. Instead of representative recharge rate of large watershed, the subdivided recharge rate with heterogeneous characteristics can be computed in daily base. The estimated daily recharge rate is an advanced quantity reflecting the heterogeneity of hydrogeology, climatic condition, land use as well as physical behaviour of water in soil layers. Therefore, the newly suggested method could be expected to enhance existing methods.

• The Korean Journal of Pesticide Science
• /
• v.12 no.4
• /
• pp.357-362
• /
• 2008

In order to survey the residual characteristics of pesticides and assess their safeties in the agricultural products from markets, the agricultural products were purchased from the wholesale and traditional markets in Cheongju and Jeonju and analyzed the pesticide residues in them. No pesticide residues were found in samples from Cheongju, whereas, in case of samples collected from Jeonju, 3 pesticides including chlorothalonil were detected from 5 samples such as eggplant from wholesale market and 3 pesticides including azoxystrobin were found in tomato and grape from traditional market. Pesticide residues were detected from 10.9% of the total samples and detection levels were less than their maximum residue levels. Their estimated daily intakes ranged from 0.00102 to 0.03616% of their acceptable daily intakes, representing residue levels of the pesticides detected were evaluated to be safe.

• Journal of Community Nutrition
• /
• v.7 no.3
• /
• pp.156-162
• /
• 2005

This study was done to analyze the contents of food and nutrition information in daily newspapers. Articles in four newspapers(Chosun, Donga, Hankook, Joongang Ilbo) published during November 2003 to April 2004 were monitored. In analysis, 216 articles were used. Classifying the articles by topics, cuisine/cooking $(19.4\%)$ and food/ nutrition related to diseases $(18.1\%)$ were most common. Articles regarding food sanitation or safety, obesity and diet accounted for $12.5\%$, respectively. Other topics in articles included food culture$(11.1\%)$, balanced meals/eating habits $(10.6\%)$ and functional foods $(7.9\%)$. About $77\%$ of articles were written for unspecified persons. Regarding the types of articles, news articles made up $44\%$ of monitored articles, followed by feature articles $(14.8\%)$, advertisement by articles $(12.9\%)$, serials by professionals $(11.6\%)$, and information of daily life $(8.8\%)$. Nineteen percent of articles did not have specific sources, while $20.8\%$ were based on interviews with professionals. Other sources of articles included research reports $(14.8\%)$, field reports $(12.1\%)$ and literature $(8.8\%)$. Contents analysis showed that four-fifth of articles were evaluated as 'contents and titles are consistent', 'not difficult to understand', 'contents are not exaggerated', and 'information is not overgeneralized'. Seventy-one percent of articles were evaluated positively on increasing awareness regarding food/nutrition, while $56.5\%$ were evaluated as providing practical information. The major problems in articles were 'intentional or indirect advertisements of specific items/companies' ($74.6\%$ of articles applicable), 'lacking in scientific basis/explanation' $(65.3\%)$, 'presenting unbalanced information due to focusing on specific area' $(46.7\%)$, 'unclearness of contents' $(38.4\%)$, and 'lacking in explanation of technical terms' $(35.2\%)$. To provide reliable information, stating the sources of articles clearly and supplementing the articles with scientific basis and balanced information on specific topics are needed. It is also necessary to explain the contents and technical terms clearly and to reduce the contents of intentional, indirect advertisement in nutrition-related articles.

• Korean Journal of Remote Sensing
• /
• v.26 no.2
• /
• pp.277-285
• /
• 2010

Geostationary Ocean Color Imager(GOCI-I), the world's first space-borne ocean color observation geostationary satellite, will be launched on June 2010. Development of GOCI-I took about 6 years, and its expected lifetime is about 7 years. The mission and user requirements of GOCI-II are required to be defined at this moment. Because baseline of the main mission of GOCI-II must be defined during the development time and early operational period of GOCI-I. The main difference between these missions is the global-monitoring capability of GOCI-II, which will meet the necessity of the monitoring and research on climate change in the long-term. The user requirements of GOCI-II will have higher spatial resolution, $250m{\times}250m$, and 12 spectral bands to fulfill GOCI-I's user request, which could not be implemented on GOCI-I for technical reasons. A dedicated panchromatic band will be added for the nighttime observation to obtain fishery information. GOCI-II will have a new capability, supporting user-definable observation requests such as clear sky area without clouds and special-event areas, etc. This will enable higher applicability of GOCI-II products. GOCI-II will perform observations 8 times daily, the same as GOCI-I's. Additionally, daily global observation once or twice daily is planned for GOCI-II. In this paper, we present an improved development and organization structure to solve the problems that have emerged so far. The hardware design of the GOCI-II will proceed in conjunction with domestic or foreign space agencies.

• Journal of the Institute of Convergence Signal Processing
• /
• v.24 no.3
• /
• pp.134-139
• /
• 2023

Rehabilitators perform outpatient treatment and daily rehabilitation exercises to recover physical function with the aim of quickly returning to society after surgical treatment. Unlike performing exercises in a hospital with the help of a professional therapist, there are many difficulties in performing rehabilitation exercises by the patient on a daily basis. In this paper, we propose a CNN-LSTM-based upper limb rehabilitation real-time monitoring system so that patients can perform rehabilitation efficiently and with correct posture on a daily basis. The proposed system measures biological signals through shoulder-mounted hardware equipped with EMG and IMU, performs preprocessing and normalization for learning, and uses them as a learning dataset. The implemented model consists of three polling layers of three synthetic stacks for feature detection and two LSTM layers for classification, and we were able to confirm a learning result of 97.44% on the validation data. After that, we conducted a comparative evaluation with the Teachable machine, and as a result of the comparative evaluation, we confirmed that the model was implemented at 93.6% and the Teachable machine at 94.4%, and both models showed similar classification performance.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.52 no.7
• /
• pp.414-420
• /
• 2003

The domestic needs for larger capability of power sources are increasing to cope with the expanding power load which results from the industrial developments & the progressed life style. In summer, the peak load is mainly due to the non-industrial reasons such as air-conditioners and other cooling equipments. To cover the concentrated peak load in stable, the power transmission lines should be more constructed and efficiently operated. The ampacity design of the underground cable system is generally following international standards such as IEC287, IEC60853 and JCS168 which regards the shape of 100% daily full power loads. It is not so efficient to neglect the real shapes of load curves generally below 60~70% of full load. The dynamic (real time) rating system tends to be used with the measured thermal parameters which make it possible to calculate the maximum ampacity within required periods. In this paper, the CTM(Conductor Temperature Monitoring) which is the base of dynamic rating systems for tunnel environment is proposed by a design of lumped thermal network ($\pi$-type thermal model) and distribution temperature sensor attached configuration, including the estimation results of its performances by load cycle test on 345kV single phase XLPE cable.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.12
• /
• pp.1020-1026
• /
• 2005

In the era of ubiquitous computing, human-friendly man-machine interface is getting more attention due to its possibility to offer convenient services. For this, in this paper, we introduce a 'Half-Mirror Interface System (HMIS)' as a novel type of human-friendly man-machine interfaces. Basically, HMIS consists of half-mirror, USB-Webcam, microphone, 2ch-speaker, and high-speed processing unit. In our HMIS, two principal operation modes are selected by the existence of the user in front of it. The first one, 'mirror-mode', is activated when the user's face is detected via USB-Webcam. In this mode, HMIS provides three basic functions such as 1) make-up assistance by magnifying an interested facial component and TTS (Text-To-Speech) guide for appropriate make-up, 2) Daily weather information provider via WWW service, 3) Health monitoring/diagnosis service using Chinese medicine knowledge. The second one, 'display-mode' is designed to show decorative pictures, family photos, art paintings and so on. This mode is activated when the user's face is not detected for a time being. In display-mode, we also added a 'healing-window' function and 'healing-music player' function for user's psychological comfort and/or relaxation. All these functions are accessible by commercially available voice synthesis/recognition package.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.7
• /
• pp.1628-1634
• /
• 2011

With the advancement of ubiquitous computing technology, u-Healthcare (i.e. ubiquitous health care), is regarded as a key application for information society, which provides health management service at anytime in anywhere. To implement U-Healthcare system, it is essential to monitor stable biological information in daily life. In this paper, we proposed a small size, light weight, patch type real time temperature monitoring system based on wireless sensor network (WSN) technology to monitor patients' body temperature without any inconvenience of activity.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.195.1-195.1
• /
• 2011

This paper presents an experimental study on a new potential geothermal energy source obtained from tunnel structures. An "energy textile", which is a textile-type ground heat exchanger, was fabricated between a shotcrete layer and a guided drainage geotextile in the tunnel lining system. To examine the long-term thermal behavior of the energy textile, the difference in temperatures of the inlet and outlet fluid circulating through the heat exchange pipe within the energy textile was monitored using a constant-temperature water bath. Daily heat exchange rate of the energy textile during cooling operation was estimated from the measured temperatures of the inlet and outlet fluid through the energy textile. The air and ground temperature was also continuously monitored. The operation of the energy textile as a ground heat exchanger was simulated using a 3D numerical CFD model (Fluent). The thermal conductivity of shotcrete and concrete lining components and temperature variation of air in the tunnel were incorporated in the model. The numerical analysis shows a good agreement with the long-term monitoring result.