• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.1 s.104
• /
• pp.60-66
• /
• 2006

In this paper, a circular microstrip patch antenna for switchable polarization is presented. For the switchable polarization, pairs of tuning stubs and two PIN diodes are utilized. By independently setting the PIN diodes on or off, the antenna produces either linear polarization or circular polarization. From the results, the -10 dB impedance bandwidths of 57.0 MHz($2.4\%$) and 50.0 MHz($2.1\%$) when operated in the linear polarization, and the 3 dB axial ratio bandwidth of $1.3\%$ with minimum of 0.2 and 0.9 dB in the circular polarization have been observed.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.6
• /
• pp.27-27
• /
• 2002

In this paper, the LPA(Linear Power Amplifier) using new analog feedforward linearizer for IMT-2000 frequency band(2110MHz∼2170MHz) is proposed and fabricated. The designed analog feedforward linearizer system possessing the characteristics of stable operation for input power variation is simple structure and small size. When two-tones in IMT-2000 frequency band are applied to an amplifier, this LPA have the average output power is about 30W and the IMD value is below about 60dBc without correcting the circuit. In camparision with an amplifier without feedforward system at the same output power, the supposed analog feedforward linear amplifier posseses improved the IMD characteristics of over 23dB.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.6
• /
• pp.285-291
• /
• 2002

In this paper, the LPA(Linear Power Amplifier) using new analog feedforward linearizer for IMT-2000 frequency band(2110MHz∼2170MHz) is proposed and fabricated. The designed analog feedforward linearizer system possessing the characteristics of stable operation for input power variation is simple structure and small size. When two-tones in IMT-2000 frequency band are applied to an amplifier, this LPA have the average output power is about 30W and the IMD value is below about 60dBc without correcting the circuit. In camparision with an amplifier without feedforward system at the same output power, the supposed analog feedforward linear amplifier posseses improved the IMD characteristics of over 23dB.

• Journal of applied mathematics & informatics
• /
• v.37 no.1_2
• /
• pp.23-35
• /
• 2019

Self-reciprocal polynomials are important because it is possible to specify only half of the coefficients. The special case of the self-reciprocal polynomial, the maximum weight polynomial, is particularly important. In this paper, we analyze even cell 90/150 cellular automata with linear rule blocks of the form < $a_1,{\cdots},a_n,d_1,d_2,b_n,{\cdots},b_1$ >. Also we show that there is no 90/150 CA of the form < $U_n{\mid}R_2{\mid}U^*_n$ > or < $\bar{U_n}{\mid}R_2{\mid}\bar{U^*_n}$ > whose characteristic polynomial is $f_{2n+2}(x)=x^{2n+2}+{\cdots}+x+1$ where $R_2$ =< $d_1,d_2$ > and $U_n$ =< $0,{\cdots},0$ >, and $\bar{U_n}$ =< $1,{\cdots},1$ >.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.6
• /
• pp.1166-1173
• /
• 2009

In this paper, we studied on the power amplifier which has the output of the optimal to 100MHz-2GHz band. Optimal output power match was fabricated using the two types; one is the linear tapering and the other is the impedance transformer. In the case of output power match using linear tapering, output power was 35.35dBm at 2GHz and 31.41dBm at 100MHz. The other case of output match using impedance transformer, output power was 34.8dBm at 2GHz and 33.25dBm at 100MHz. Comparison of the results in the two cases, impedance transformer type present the improved results by l.84dB of output power.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.7
• /
• pp.1044-1052
• /
• 1999

A 2-stage 1 watt MMIC(Monolithic Microwave Integrated Circuits) HPA(High Power Amplifiers) at 20 GHz band has been designed and fabricated. The $0.15\mu\textrm{m}$ with the width of $400\mu\textrm{m}$for single device pHEMT technology was used for the fabrication of this MMIC HPA. Due to the series feedback technique from source to ground, bias circuits and stabilization circuits on the main microstrip line, the stability factors(Ks) are more than one at full frequency. The independent operation for each stage and excellent S11, S22 less than -20 dB have been obtained by using lange couplers. For beginning the easy design, linear S-parameters have been extracted from the nonlinear equivalent circuit in foundry library, and equivalent circuits of devices at in/output ports were calculated from this S-parameters. The measured performances, which are in well agreement with the predicted ones, showed the MMIC HPA in this paper has the minimum 15 dB of linear gain, -20 dB of reflection coefficients and 31 dBm of output power over 17~25 GHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.7 s.110
• /
• pp.605-614
• /
• 2006

In this paper, a 3D structure skimmer-shaped circular microstrip antenna is designed, the ends of whose both sides are made as DC(Depressed Carving part) applying perturbation effect to reduce the patch size of microstrip antenna operating at design frequency 1.575 GHz. The result shows its return loss, - 10 dB bandwidth, gain, - 3 dB beamwidth E, H-plane are -26.59 dB, 65 MHz(4.13 %), 4.66 dBd, $79^{\circ},\;87^{\circ}$ respectively. The diameter of the antenna is 85 mm, which is 12.4 % reduced compared to the size(97 mm) of general microstrip patch antenna. Therefore its area reduction is 23.2 %. Furthermore, a linear and circular polarized baseball-shaped circular microstrip antenna is designed to minimize the patch size of the antenna. This structure of antenna operating at the design frequency 1.575 GHz is applied with the optimum RC(Raised Carving part) & DC ratio and an asymptotic line angle. In case of linear polarized baseball-shaped circular microstrip antenna, the patch size of the antenna is 74 mm, which is 41.8 % area reduction compared to general microstrip patch antenna. In case of circular polarized baseball-shaped circular microstrip antenna, the diameter of patch is 82 mm, which is 28.5 % area reduction compare to general microstrip patch antenna linear polarized. We have verified that the perturbation effect can be applied to minimize the circular microstrip antenna.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.684-686
• /
• 2003

Until recently, the 2-D FEA neglects the magnetic field fringing and end-leakage, it leads to the approach of a trial and error experimental design. Since 3-D FEA is investigated for exact side force analysis of Linear Motor for Linear compressor. For the 3-B FEA, ANSYS as commercial tool are used.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.4
• /
• pp.32-39
• /
• 1998

Remez exchange algorithm was applied to realize an IF SAW filter for CDMA cellular phone systems. A SAW filter with withdrawal weighted transducers was simulated and then fabricated on 42.75.deg. ST-cut Quaritz wafer. Excellent agreement wasobtained between calculated andmeasured responses. Fabricated SAWfilterswere mounted on ceramic SMD package for reducing their size and volume. SAW filters were measured under matched circuit. As a result, 5 dB bandwidth of 1.32 MHz, 33dB bandwidth of 1.76 MHz, insertion loss of 13.8 dB and peak to peak ripple at passband of 0.26 dB were obtained. Linear group delay responses at passband were also obtained. These characteristics were good for practical use of IF SAW filter for CDMA system.

• Journal of Navigation and Port Research
• /
• v.28 no.3
• /
• pp.207-211
• /
• 2004

The final goal of this research is to establish the relative dangerousness D/B for factors on seakeeping performance. This D/B is essential to develope the seakeeping performance evaluation system built-on-ship. The system is composed of the apparatus for measuring a vertical acceleration to be generated by the ship's motions, computer for calculating the synthetic seakeeping performance index and monitor for displaying the evaluating diagram of navigational safety of ship. In this paper, a methodology on the establishment of the relative dangerousness D/B for factors on seakeeping performance is presented by a numerical simulations, playing an important role on the algorithm of the program for calculating the synthetic seakeeping performance index. Finally, It is investigated whether the relative dangerousness D/B can be realized an accurate values according to the loading conditions, weather conditions, wave directions end present ship's speed of a model ship.