• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.570-575
• /
• 2007

The thermal performance of the air receiver filled with porous material for 5kWt dish solar collector installed in Inha University, Korea, is experimentally investigated. The diameter of the parabolic dish is 3.2 m, and its focal length is 2 m. It consists of 10 small pieces of glasses which have their own curvatures, and the effective reflecting area is 5.9 m2. The reflectivity of the glass is 0.95, and the thermal capacity of the system is about 5 kW thermal. The aperture diameter of the cylindrical-shape receiver which is made of stainless steel is 100 mm, and the height is 210 mm. A quartz window is installed at the receiver aperture to minimize the convective heat loss and prevent air leakages. In order to increase the heat transfer area, porous material (nickel-alloy) is inserted into the receiver. Air flows into the upper part of the receiver, which is the opposite side of the aperture. After the air flows through the inside receiver, that goes out of the receiver through 3 exits which are located near the aperture. The volumetric flow rates of air are varied from 600 to 1200 L/min. The thermal efficiency of the receiver ranges from 82% - 92% depending upon the flow rate. The results show that the system efficiency and receiver efficiency increase as the volume flow rate increases as expected. These results from the experiment will be useful for the applications to air heating receivers and solar reactors.

• Korean Journal of Materials Research
• /
• v.18 no.10
• /
• pp.547-551
• /
• 2008

Crack-free joining of $Si_3N_4\;and\;Al_2O_3$ using 15 layers has been achieved by a unique approach introducing Sialon polytypoids as a functionally graded materials (FGMs) bonding layer. In the past, hot press sintering of multilayered FGMs with 20 layers of thickness $500{\mu}m$ each has been fabricated successfully. In this study, the number of layers for FGM was reduced to 15 layers from 20 layers for optimization. For fabrication, model was hot pressed at 38 MPa while heating up to $1700^{\circ}$, and it was cooled at $2^{\circ}$/min to minimize residual stress during sintering. Initially, FGM with 15 layers had cracks near 90 wt.% 12H / 10 wt.% $Al_2O_3$ and 90 wt.% 12H/10 wt.% $Si_3N_4$ layers. To solve this problem, FEM (finite element method) program based on the maximum tensile stress theory was applied to design optimized FGM layers of crack free joint. The sample is 3-dimensional cylindrical shape where this has been transformed to 2-dimensional axisymmetric mode. Based on the simulation, crack-free FGM sample was obtained by designing axial, hoop and radial stresses less than tensile strength values across all the layers of FGM. Therefore, we were able to predict and prevent the damage by calculating its thermal stress using its elastic modulus and coefficient of thermal expansion. Such analyses are especially useful for FGM samples where the residual stresses are very difficult to measure experimentally.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.19 no.1
• /
• pp.17-24
• /
• 1983

The authors carried out an experiment to find the optomotor response of killifish, Orizias latipes(TEMMINCK et SCHLEGEL) and Yellowtail, Seriola quinqueradiata (TEMMINCK et SCHLEGEL) according to the colors of the netting pattern on the visual screen and the revolving velocities of the visual screen. The experimental water tank was made of 0.5 cm thick transparent acryl in the cylindrical shape (100R$\times$42H cm). The water level in the tank was maintained 30cm high from the bottom. The colors of the netting pattern (mesh size: 19.1cm, width of netting twine: 1.5cm, hanging ratio: 84%) on the three visual screens were black, red and green respectively. The revolving velocities of the visual screen were controlled by pulley, bevel gear and variable speed motor in three steps; slow (15.0cm/sec), middle (37.4cm/sec) and high (62.9cm/sec). The fish was put into the water tank before each experiment and released in it for 30 minutes in order to acclimatize itself to the tank. The visual screen was revolved for 4 minutes per each experiment, at first the fish was released for 1 minute, and then the behavior of the fish was observed for 3 minutes. In the course of clockwise and counter clockwise experiments, 10 minutes-pause was given for the rest. The behavior of the fish was observed by video system, and rounding number and swimming speed of the fish were analysed. The results obtained are as follows: (1) Optomotor response rate of Killifish and yellowtail were 95% and 94% respectively. (2) Response of the fish according to the colors of the netting pattern on the three visual screens was best in black, and second in red and third in green. (3) Response of the fish according to the revolving velocities of the visual screen was best in high speed, and second in middle speed and third in slow speed.

• The Korean Journal of Malacology
• /
• v.27 no.2
• /
• pp.149-157
• /
• 2011

Some characteristics of the formations of acrosomal vesicles during the late stage of spermatids during spermiogenesis and taxonomical charateristics of sperm morphology in male two species (Saxidomus purpurata and Meretrix petechialis) in the family Veneridae were investigated by electron microscope observations. In two species, the morphologies of the spermatozoa have the primitive type and are similar to those of other bivalves in that it contains a short midpiece with five mitochondria surrounding the centrioles. The morphologies of the sperm nuclear types of S. purpurata and M. petechialis in Veneridae have the curved cylindrical and cylinderical type, respectively. And the acrosome shapes of two species are the same cap-shape type. In particular, the axial filament is not found in the lumen of the acrosome of two species, however, subacrosomal material are observed in the subacrosomal spaces between the anterior nuclear fossa and the acrosomal vesicle of two species. The spermatozoon of S. purpurata is approximately 46-$52{\mu}m$ in length, including a curved sperm nucleus (about $3.75{\mu}m$ in length), a long acrosome (about $0.40{\mu}m$ in length),and a tail flagellum (about 45-$47{\mu}m$ long). And the spermatozoon of M. petechialis is approximately 47-$50{\mu}m$ in length including a slightly curved sperm nucleus (about $1.50{\mu}m$ in length), an acrosome (about $0.56{\mu}m$ in length) and tail flagellum (44-$48{\mu}m$ in length). In two species, the axoneme of the sperm tail flagellum of each species consists of nine pairs of microtubules at the periphery and a pair of cental doublets at the center. Therefore, the axoneme of the sperm tail flagellum shows a 9 + 2 structure. In particular, taxonomically important some charateristics of sperm morphologies of two species in the family Veneridae are acrosomal morphology of the sperm, The axial filament is not found in the acrosome as seen in a few species of the family Veneridae in the subclass Heterodonta. The acrosomal vesicle is composed of right, left basal rings and the apex part of the acrosomal vesicle. In particular, right and left basal rings show electron opaque part (region), while the apex part of the acrosomal vesicle shows electron lucent part (region). These charateristics belong to the subclass Heterodonta, unlikely a characteristic of the subclass Pteriomorphia showing all part of the acrosome being composed of electron opaque part (region). Therefore, it is easy to distinguish the families or the subclasses by the acrosomal structures. The number of mitochondria in the midpiece of the sperm of S. purpurata and M. petechialis in Veneridae are five. However, the number of mitochondria in the midpiece of the sperm in most species of Veneridae in the subclass Heterodonta are four. Therefore, the number of mitochondria of the sperm midpiece of two species are exceptionally 5, and it is only exceptional case in the species in Veneridae in the subclass Heterodonta. Except these cases, the number of mitochondria in the sperm midpiece in all families in the subclass Heterodontaare are 4, and now widely used in taxonomic analyses.

• Korean Journal of Breeding Science
• /
• v.49 no.4
• /
• pp.396-402
• /
• 2017

'Daname' is a foxtail millet(Setaria italica Beauv.) variety developed and registered by Department of Southern Area Crop Science, NICS, RDA in 2014. This variety which collected from IT252182 was developed through pure line selection. 'Daname' is a early-maturing variety having 100 days of growth period from seeding to harvesting in Milyang of Korea. The culm length is about 97 cm which is 20cm shorter culm length than standard variety 'Hwanggeumjo', and it showed tolerant to lodging in field. The panicle shape is a cylindrical and the length is about 19cm. According to the grain, seed color and dehusked grain colors are orange and yellow and endosperm characteristic is non-glutinous. The yield performance of this variety was about $3.81t\;ha^{-1}$ in local adaptability test from 2013 to 2014 and it showed similar with standard variety 'Hwanggeumjo'. As the addition amount of 'Daname' in rice increased from 0% to 30% and 100%, the antioxidant ability of 'Daname' added rice and hardness/stickiness balances were increased. But we could not find out the difference of hardness/stickiness balances between 0%and 10% addition. So, 10% addition amount was concluded to increase antioxidant ability regardless eating quality of cooked rice. (Variety registration No. 6243)

• Korean Journal of Breeding Science
• /
• v.50 no.4
• /
• pp.510-515
• /
• 2018

Hwangmichal, a yellow waxy corn hybrid, is a single cross hybrid developed in 2014. This hybrid was created by crossing the seed parent KY30 and pollen parent KY9. Hwangmichal has yellow kernels with a conico-cylindrical ear shape. The days to silking of Hwangmichal were similar to that of Ilmichal, a check hybrid. The ear height ratio of Hwangmichal was 50%, which was lower than that of Ilmichal, and its number of tillers was less than that of Ilmichal. The ear size of Hwangmichal was smaller than that of Ilmichal and the kernel set ratio was 89%. Its sensory evaluation was better than that of Ilmichal. The carotenoid content of Hwangmichal was $32.2{\mu}g/g$, which was much higher than that of Ilmichal. Lodging resistance of Hwangmichal was better than that of Ilmichal. Although the number of fresh ears of Hwangmichal was more than that of Ilmichal, the weight of fresh ears was lower than that of Ilmichal. The flowering period of its parent lines was well matched and seed production was 3:1 at a planting density of parent lines of more than 2:1. It is adaptable to the whole country except for Jeju-do. The plant variety protection right of Hwangmichal was registered in June 2017, and its grant number is 6728.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.5C
• /
• pp.209-218
• /
• 2010

In residual soils, large particles such as rock fragments or gravel are surrounded by sand or clay. The strength of such granular mixtures can be controlled by the concentration of fine or coarse grains. The percentage by weight, size or shape of gravel in the mixture that can control the strength of the mixture has not been clearly determined for various granular mixtures. In this study, the effect of dispersed gravels on the shear characteristics of sand was evaluated. Large and small gravels were inserted in the middle of each layer with moist Nakdong River sand and compacted into a cylindrical sample with five equal layers. Embedded gravel ratios by weight were 0, 3, 9, and 14%. After consolidation, a series of undrained triaxial compression tests was performed on Nakdong River sand with dispersed gravels. Maximum deviator stresses of the Nakdong River sand with large gravels decrease up to 38% as a percentage of embedded gravels increases. Such strength degradation decreases as a confining pressure increases. The maximum deviator stress increases as the percentage by weight of small gravel increases; at 3 or 9% of gravel weight it slightly increases but at 14% of gravel weight it increases up to 34%.

• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.4
• /
• pp.23-29
• /
• 2017

The packaged optical fiber Bragg grating sensors which were networked by multiplexing the Bragg grating sensors with WDM technology were investigated in application for the structural health monitoring of the marine trestle structure transporting the ship. The optical fiber Bragg grating sensor was packaged in a cylindrical shape made of aluminum tubes. Furthermore, after the packaged optical fiber sensor was inserted in polymeric tube, the epoxy was filled inside the tube so that the sensor has resistance and durability against sea water. The packaged optical fiber sensor component was investigated under 0.2 MPa of hydraulic pressure and was found to be robust. The number and location of Bragg gratings attached at the trestle were determined where the trestle was subject to high displacement obtained by the finite element simulation. Strain of the part in the trestle being subjected to the maximum load was analyzed to be ${\sim}1000{\mu}{\varepsilon}$ and thus shift in Bragg wavelength of the sensor caused by the maximum load of the trestle was found to be ~1,200 pm. According to results of the finite element analysis, the Bragg wavelength spacings of the sensors were determined to have 3~5 nm without overlapping of grating wavelengths between sensors when the trestle was under loads and thus 50 of the grating sensors with each module consisting of 5 sensors could be networked within 150 nm optical window at 1550 nm wavelength of the Bragg wavelength interrogator. Shifts in Bragg wavelength of the 5 packaged optical fiber sensors attached at the mock trestle unit were well interrogated by the grating interrogator which used the optical fiber loop mirror, and the maximum strain rate was measured to be about $235.650{\mu}{\varepsilon}$. The modelling result of the sensor packaging and networking was in good agreements with experimental result each other.

• Journal of the Korean earth science society
• /
• v.33 no.7
• /
• pp.627-636
• /
• 2012

In the Obongri-Goseong area of Gangwondo, South Korea, there are six densely distributed volcanic edifices i.e., Duibaejae, Oeumsan, Galmibong, 249 m height, 166 m height, and 102 m height, and two other volcanic edifices including Goseongsan and Unbongsan volcanic edifice that are separately located from a distance. A previously undiscovered 249m volcanic edifice in Obongri was found in this investigation, and the six volcanic edifices distributed in Obongri will be referred to as the Obongri volcanic edifice group. Volcanic edifices in this area were interpreted by other researchers as being volcanic plug, plug dome, and cylindrical volcanic pipe type edifices. The aim of this study is to investigate the aspect of volcanic activity in the Obongri-Goseong area and the formation of volcanic edifices by examining of the shape of volcanic edifices, stratigraphy, and characterization of volcanic products. All the volcanic edifices in the area are composed of basaltic rocks on the Mesozoic granite basement, and the prevalence of the dome shape increased towards the upper part of the mountain. Three volcanic edifices (Duibaejae, 166 m height, 102 m height) include intercalated pyroclastic deposits between the basaltic rocks and the basement. The pyroclastic deposit in the Duibaejae volcanic edifice is composed of quartz, feldspar, granite fragments originated from the basement, and scoria fragments originated from the volcanic eruption. In addition to angular olivine, plagioclase, and pyroxene xenocrysts, all the basaltic rocks contained mantle xenolith, gabbroic xenolith originated from the lower crust, and granitic xenolith originated from the basement. This fact indicates that magma rapidly rose to the surface and that the volcanic activity was explosive. It is also interpreted that, as the basaltic magma became highly viscous due to the large amount of xenocrysts, the erupted magma formed a dome structure on the surface. The original dome structure was then severely eroded out leaving a plug dome formation on the basement.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.2
• /
• pp.120-127
• /
• 2015

Purpose: The aim was to investigate the effect of implant thread designs on the stress dissipation of the implant. Materials and methods: The threads evaluated in this study included the V-shaped, buttress, reverse buttress, and square-shaped threads, which were of the same size (depth). Building four different implant/bone complexes each consisting of an implant with one of the 4 different threads on its cylindrical body ($4.1mm{\times}10mm$), a force of 100 N was applied onto the top of implant abutment at $30^{\circ}$ with the implant axis. In order to simulate different osseointegration stages at the implant/bone interfaces, a nonlinear contact condition was used to simulate immature osseointegration and a bonding condition for mature osseointegration states. Results: Stress distribution pattern around the implant differed depending on the osseointegration states. Stress levels as well as the differences in the stress between the analysis models (with different threads) were higher in the case of the immature osseointegration state. Both the stress levels and the differences between analysis models became lower at the completely osseointegrated state. Stress dissipation characteristics of the V-shape thread was in the middle of the four threads in both the immature and mature states of osseointegration. These results indicated that implant thread design may have biomechanical impact on the implant bed bone until the osseointegration process has been finished. Conclusion: The stress dissipation characteristics of V-shape thread was in the middle of the four threads in both the immature and mature states of osseointegration.