• 약학회지
• /
• 제25권4호
• /
• pp.193-197
• /
• 1981

Germanium (Ge) content in Zingiberis Rhizoma was determined by flameless atomic absorption spectrometry with a graphite tube atomizer. The Ge content of the cortical layer was 65.mu.g/g, the central cylinder, $98\mu$g/g and the total, $87\mu$g/g. In the effect of the extraction of Ge by various solvents, polar solvent was more effective than the nonpolar one, Especially, water was the most effective solvent. The water extract of Zingiberis Rhizoma, separated by sephadex G-25 gel filtration, was fractionated into 2 peaks at 254nm. Both the peaks showed atomic absorptions of Ge. It may be concluded that the Ge components of Zingiberis Rbizoma exist as the form of an aqueous organic compounds or associated forms with proteins.

• 대한음성학회:학술대회논문집
• /
• 대한음성학회 2005년도 추계 학술대회 발표논문집
• /
• pp.51-54
• /
• 2005

This paper analyzes the vocal tract area estimation algorithm used as a part of a speech analysis program to help deaf children correct their pronunciations by comparing their vocal tract shape with normal children's. Assuming that a vocal tract is a concatenation of cylinder tubes with a different cross section, we compute the relative vocal tract area of each tube using the reflection coefficients obtained from linear predictive coding. Then, obtain the absolute vocal tract area by computing the height of lip opening with a formula modified for children's speech. Using the speech data for five Korean vowels (/a/, /e/, /i/, /o/, and /u/), we investigate the effects of the sampling frequency, frame size, and model order. We compare vocal tract shapes obtained from deaf and normal children's speech.

• 대한설비공학회지:설비저널
• /
• 제14권2호
• /
• pp.118-124
• /
• 1985

The motion of a fluid in the closed annular cavity formed by two concentric vertical cylinders with externally finned tube has been analysed by a numerical solutions of the equation of momentum and energy. For the calculation procedure, the fluid is assumed to have constant thermo-dynamic and transporties except for the density, which is temperature-dependent in the buoyancy term of the vertical momentum equation (Boussinesq approximation). The govern ins equations for velocity and temperature are solved by a finite difference technique which incoorporates a scheme for treating the coupled variables. Results are presented for a range of the Rayleigh number and for various values of the fin height and the number of fins.

• Geomechanics and Engineering
• /
• 제35권2호
• /
• pp.181-194
• /
• 2023

The primary objective of this study is to examine the influence of geometry on the stability characteristics of cylindrical microstructures. This investigation entails a stability analysis of a bi-directional functionally graded (BD-FG) cylindrical imperfect concrete beam, focusing on the impact of geometry. Both the first-order shear deformation beam theory and the modified coupled stress theory are employed to explore the buckling and dynamic behaviors of the structure. The cylinder-shaped imperfect beam is constructed using a porosity-dependent functionally graded (FG) concrete material, wherein diverse porosity voids and material distributions are incorporated along the radial axis of the beam. The radius functions are considered in both uniform and nonuniform variations, reflecting their alterations along the length of the beam. The combination of these characteristics leads to the creation of BD-FG configurations. In order to enable the assessment of stability using energy principles, a numerical technique is utilized to formulate the equations for partial derivatives (PDEs).

• 대한기계학회논문집
• /
• 제14권1호
• /
• pp.241-250
• /
• 1990

본 연구에서는 낙구식 점도계를 이용하여 낮은 농도의 용액을 실험할 때 종말 속도측정의 어려움을 해결하기 위하여 레이저와 특수 타이머를 설치하였으며 정확한 특성시간을 결정하기 위하여 실린더 내부의 시험유체를 교란시키지 않고, 떨어뜨린 구 를 회수하는 장치를 제작하였다. 또한 주로 rheogoniometer에 의존하던 영 전단률 점성계수를 측정하기 위하여 속이 빈 알루미늄 구(hollow aluminium ball)의 밀도를 시험 유체와 거의 같은 정도까지 변화시켜가며 종말 속도를 측정하였으며 점탄성 유체 로써 Separan AP-273의 낮은 농도인 300에서 2000wppm까지의 저농도 용액에 대한 특성 시간을 여러모델에 의하여 실험적으로 결정하고 저농도 폴리머 용액에서 퇴화로 인한 점탄성유체의 특성 변화를 분석하였다.

• 한국수소및신에너지학회논문집
• /
• 제22권4호
• /
• pp.552-558
• /
• 2011

A 50 kW class rotating body type wave energy converter consisted of two floating bodies and a PTO (Power Takeoff) unit is studied. As an wave energy extractor, the body is designed to have a VLCO (Variable Liquid-Column Oscillator) having a liquid filled U-tube with air chambers. Owing to the oscillation of the liquid in the U-tube caused by the air spring effect of the air chambers, the amplitude of response of the VLCO becomes significantly amplified for a target wave period. The PTO converts the rotational moment introduced from the relative motion of the hinged bodies to an hydraulic power by means of a cylinder. A high pressure accumulator, hydraulic motor and a generator are equipped in the PTO to convert the hydraulic power to electric power. A control law for adjusting the oscillation period of the VLCO is proposed for the efficient operation of the VLCO with various wave conditions. It is found that the effect of the air spring has an important role to play in making the oscillation of the VLCO match with the ocean wave. In this way, the wave energy converter equipped with the VLCO provides the most effective mode for extracting energy from the ocean wave.

• 한국생산제조학회지
• /
• 제22권3_1spc호
• /
• pp.573-579
• /
• 2013

Once-through helically coiled steam generator tubes subjected to external pressure are of interest because of their application to advanced small- and medium-sized integral reactors, in which a primary coolant with a relatively higher pressure flows outside the tubes, while secondary water with a relatively lower pressure flows inside the tubes. Another notable point is that the values of the mean radius to thickness ratio of these steam generator tubes are very small, which means that a thick-walled cylinder is employed for these steam generator tubes. In the present paper, the maximum allowable pressure of helically coiled and thick-walled steam generator tubes with through-wall cracks under external pressure is investigated based on a detailed nonlinear three-dimensional finite element analysis. In terms of the crack orientation, either circumferential or axial through-wall cracks are considered. In particular, in order to quantify the effect of the crack location on the maximum external pressure, these cracks are assumed to be located in the intrados, extrados, and flank of helically coiled cylinders. Moreover, an evaluation is also made of how the maximum external pressure is affected by the ovality, which might be inherently induced during the tube coiling process used to fabricate the helically coiled steam generator tubes.

• 청정기술
• /
• 제20권4호
• /
• pp.359-366
• /
• 2014

연소전 $CO_2$ 흡수제인 PKM1-SU와 원유의 접촉분해 촉매인 FCC (fluid catalytic cracking)입자의 고온, 고압 조건 마모 실험을 수행하였다. 지름 15.1 cm, 높이 120 cm에 스파저 튜브(sparger tube, 1 mm 오리피스)를 장착한 원통형 기포유동층반응기를 이용하여, 다양한 온도조건($0{\sim}400^{\circ}C$), 압력조건(0~20 bar)에서 입자마모 실험을 수행하였다. BET, 광학현미경, 입도분석기 등을 이용하여 실험 전, 후 입자를 분석 하였다. 또한 기존의 마모도 측정 방법인 ASTM D5757-95방법을 이용하여 층물질의 높이(4.4~10.2 cm) 및 수분 주입이 입자 마모에 미치는 영향에 대하여 확인하였다.

• Structural Engineering and Mechanics
• /
• 제91권1호
• /
• pp.75-86
• /
• 2024

In this paper, the porous metal PM-35 is proposed as the filler material of filled thin-walled tubes (FTTs), and a series of experimental study is conducted to investigate the dynamic behavior and energy absorption performance of PM-35 filled thin-walled tubes under impact loading. Firstly, cylinder solid specimens of PM-35 steel are tested to investigate the impact mechanical behavior by using the Split Hopkinson pressure bar set (SHP); Secondly, the filled thin-walled tube specimens with different geometric parameters are designed and tested to investigate the feasibility of PM-35 steel applied in FTTs by the orthogonal test. According to the results of this research, it is concluded that PM-35 steel is with the excellent characteristics of high energy absorption capacity and low yield strength, which make it a potential filler material for FTTs. The micron-sizes pore structure of PM-35 is the main reason for the macroscopic mechanical behavior of PM-35 steel under impact loading, which makes the material to exhibit greater deformation when subjected to external forces and obviously improve the toughness of the material. In addition, PM-35 steel core-filled thin-wall tube has excellent energy absorption ability under high-speed impact, which shows great application potential in the anti-collision structure facilities of high-speed railway and maglev train. The parameter V0 is most sensitive to the energy absorption of FTT specimens under impact loading, and the sensitivity order of different variations to the energy absorption is loading speed V0>D/t>D/L. The loading efficiency of the FTT is affected by its different geometry, which is mainly determined by the sleeve material and the filling material, which are not sensitive to changes in loading speed V0, D/t and D/L parameters.

• Korean Chemical Engineering Research
• /
• 제49권2호
• /
• pp.230-237
• /
• 2011

본 연구에서는 혈관 내 인공 폐(intravenous lung assist device)를 개발하기 위하여 CFD를 사용하여 새로운 형태의 인공 폐 모형에 대한 유체의 흐름 특성을 모델링하였다. 모델링을 위하여 중공사(hollow fiber)는 무시하였으며 vertical type과 tangential type이 모델로 사용되었다. 유체의 흐름 특성을 예측하기 유체의 입출구로 1개로 하였을 때와 2개로 하였을 때 그리고 입출구를 관의 중심부(vertical)와 관 벽의 접선방향(tangential)에 위치하였을 때의 흐름 특성을 파악 하였다. 실험 결과, tangential type과 같이 원통의 접선 방향으로 유체의 입구와 출구를 설정할 경우 vertical type에서 나타나는 흐름이 없는 영역(정체층)을 제거할 수 있었다. 또한 tangential type은 와류형태의 흐름이 지배적이며 한쪽으로 편중된 흐름이 아닌 복잡한 형태의 흐름이 발생하는 것으로 나타났다. 또한 유체의 입출구가 2개일 때 유체가 편중된 흐름이 발생하지 않고 관 전체에 복잡한 형태로 흐름이 발생하는 것으로 나타났다. 실험 결과를 통하여 우리는 유체가 유입되는 입구와 출구가 tangential type이며 각각 2개일 때 유체의 흐름이 복잡하며 정체층이 발생하지 않는 흐름이 발생한다는 것을 확인할 수 있었다.