• 한국지반공학회논문집
• /
• 제19권4호
• /
• pp.83-93
• /
• 2003

본 연구에서는 낙동강 하류 을숙도에 분포하는 0.558%의 세립분을 함유한 자연 사질토 지반에 대하여 느슨, 중간, 그리고 조밀한 지반 상태를 재현하여 초기정적전단응력의 영향을 정적 및 동적 시험을 통해 응력경로와 과잉간극수압 소산 및 잔류변형 거동을 규명하고, Bolton 이론에 의거한 파괴시 최대 유효마찰각을 상대밀도에 의한 영향과 구속압의 영향을 고려하여 제시하였다. 파괴선과 상전이점의 거리는 초기전단응력이 증가할수록 가까워지고, 느슨한 모래의 경우 그 영향이 커서 조밀한 모래의 응력경로로 접근하는 경향을 보인다. 압밀응력비 조건이 1.4에서 1.8로 변함에 따라, 상대밀도의 증가와 함께 보다 큰 액상화 저항강도를 보이고 조밀한 상대밀도 조건에서는 유사한 CSR값을 보였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제14권5호
• /
• pp.161-168
• /
• 2010

실무 및 연구에 있어서 반복하중을 받는 콘크리트 벽체의 변형 및 저항능력 그리고 재료의 변형율 등을 정확하게 평가할 수 있는 방법이 필요하다. 따라서 본 논문에서는 비선형 트러스 부재를 이용하여 반복 횡하중을 받는 철근콘크리트 벽체 또는 철근콘크리트 면부재를 모델링 하였다. 콘크리트와 배근된 철근은 각각 수직, 수평 그리고 대각선 비선형 부재를 이용해 모델링 되었다. 본 논문에서는 높이/폭 비가 1.2인 벽체를 예제로 선택하여 실험의 결과와 비교하였다. 비교를 위하여 주대각선 부재의 경로에 따른 4가지의 형상과 대각선 부재들의 배열에 따른 3가지 형상이 채택되어 실험 결과와 가장 근사한 모델링의 선택을 위해 평가를 실시하였다.

• Structural Engineering and Mechanics
• /
• 제85권5호
• /
• pp.693-707
• /
• 2023

In order to deeply reveal the working mechanism of ultra-high performance concrete (UHPC) filled steel tubular columns (UHPCFSTs) under cyclic loading, a three-dimension (3D) macro-mesoscale finite element (FE) model was established considering the randomness of steel fibers and the damage of UHPC. Model correctness and reliability were verified based on the experimental results. Next, the whole failure process of UHPC reinforced with steel fibers, passive confinement effect and internal force distribution laws were comprehensively analyzed and discussed. Finally, a simplified and practical method was proposed for predicting the ultimate bending strengths of UHPCFSTs. It was found that the non-uniform confinement effect of steel tube occurred when the drift ratio exceeded 0.5%, while the confining stress increased then decreased afterwards. There was preferable synergy between the steel tube and UHPC until failure. Compared with experimental results, the ultimate bending strengths of UHPCFSTs were undervalued by the current code provisions such as AISC360-10, EC4 and GB50936 with computed mean values (MVs) of 0.855, 0.880 and 0.836, respectively. The proposed practical method was highly accurate, as evidenced by a mean value of 1.058.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1527-1532
• /
• 2008

45% of the sports accidents is the knee damage and the representative case is the damage of an Anterior Cruciate Ligament (ACL) and the Posterior Cruciate Ligament(PCL). Although the past different views of ACL reconstruction comes to an agreement, the disputes of PCL is remained yet. The most important engineering approach for these various surgery techniques is accurately to understand and to evaluate the fatigue behavior depending on the stress flow and the stress distribution under the allotted load and the cyclic load, which are caused by the graft fixing device, the proximal tibia of the PCL reconstructing structure. Therefore, this study is the basic research of these above facts. The current transtibial tunnel surgery using the cadaveric Achilles tendon grafts is chosen for the various PCL reconstruction. The relationships between the slippage, the extension ratio, and the slippage ratio by the heel bone fixing method and the soft tissue fixing method of the Achilles tendon were also defined. This research will be the essential data to help the resonable operating techniques for the next PCL reconstruction.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권5호
• /
• pp.1108-1114
• /
• 2001

The fatigue crack propagation behavior of the SA516-Grade 70 steel which is used for pressure vessels was experimentally examined under the condition of at room temperature, $150^{\circ}C$, $250^{\circ}C$ and $370^{\circ}C$ with stress ration of R=0.1 and 0.3. The fatigue crack propagation rate , da/dN, related with the stress intensity factor range, $\vartriangle$N, was influenced by the stress ration within the stable growth of fatigue crack(Region II) with an increase in $\vartriangle$N. The resistance to the fatigue crack growth at high temperature is higher in comparison with that at room temperature, and the resistance attributed to the extent of plasticity-induced by compressive residual stress according to the cyclic loads. Fractographic examinations revels that the differences of the fatigue crack growth characteristics between room and high temperatures are mainly explained by the crack and oxide-induced by high temperature.

• 한국해양공학회지
• /
• 제9권2호
• /
• pp.141-148
• /
• 1995

Fatigue tests were carried out by a rotary bending testing machine of cantilever type. M.E.F.(ferrite encapsulated islands of martensite) materials were made by a series of heat treatment from a low carbon steel(SM 20 C). The fatigue tests were conducted at stress levels of 302 MPa and with frequencies of 25Hz, 2.5 Hz and 0.5 Hz in 3% NaCl solution. The fatigue strength increased with frequency got higher. The microcracks and corrosion pits were generated at the boundary between the matrix and the 2nd phase. The cracks generated by the corrosion pits were coalesced with the pits around the notch and became the initial crack. The $N_i/N_f$ ratio increased as the frequency and stress level decreased. The interference phenomenon increased with stress level and frequency gots higher. The crack propagation rate was delayed as the stress level lowers and the frequency gets higher, however, the range of the stress intensity factor depended only on a stress level.

• 한국지반공학회지:지반
• /
• 제10권4호
• /
• pp.83-102
• /
• 1994

건조모래의 응력이력에 따른 Ko 값을 관찰하기 위하여 압밀링 형태의 Ko시험기를 새로이 고안하였으며, 이 시험기를 사용하여 수평응력을 측정하였다. 본 실험을 위하여 총 2형태의 단주기 Ko 재하/제하시험이 4종류의 상대밀도에 대하여 수행하였다. 실험결과, 처녀재하 시의 정지토압계수 K.은 모래의 내부마촹각 U'의 함수로서 K.. : 1-0.914sin0'와 같은 관계식을 얻을 수 있었다. 처녀제하 시의 정지토압계수 Kou는 Ko.과 과압밀비(OCR)의 함수로서 Ko.=Ko. (OCR)a으로 표시할 수 있으며, 지수 a는 대체로 상대밀도가 클수록 증가하는 경향을 보인다. 처녀재재하 시의 정지토압계수 Kor은 연직응력 Qv'가 증가함에 따라 쌍곡선 형태로 감소한다. 그리고 처녀재재하 시의 응력경로는 최소제하응력의 크기에 무관하게 최대선행점으로 복귀하며, 이곡선의 기울기 mr은 OCR이 클수로 증가한다.

• 한국농공학회지
• /
• 제31권2호
• /
• pp.66-81
• /
• 1989

The characteristics of resilient modulus(Mr) which dominates the life of pavement and the design of pavement were investigated on the test specimens which were cement treated and non-treated of the three different soil types. The results are summarized as follows : 1. The resilient modulus was decreased by increasing the cyclic deviator stress ($\sigma$d) , especially the resilient modulus was gradually decreased or sometimes increased when the value of ad was greater than 0.75- 1. 0kg/cm$^2$. 2. The resilient modulus was increased by increasing the homogeneous confined stress ($\sigma$do) and such phenomena were distinct on the coarse soils. 3. The resilient modulus was increased by increasing the ratio of confined stress(Kc), and this phenomena were eminent on the coarse soils too, and the higher permanent strain was showed by increasing the value of Kc. 4. In the drained cyclic triaxial compression test, the value of ad, Kc, and (Oho) was introduced by the following interrelated equations which were similar to the Mr model of Cole. Kcn/Mr=K1(J$_2$/ $\tau$oct)K2 ............. (coarse soli) Mcn/Mr=K3($\sigma$dp/ $\tau$f)k4 ...............(fine soils) 5. The stress path was not much affected by the value of Mr, however, moisture content, dry desity, and contant of fines affected the value of Mr. 6. In the soil-cement specimens, the resilient compression strain($\varepsilon$d) was decreased by the increment of the $\sigma$ho, and Mr was decreased by increasing the $\sigma$d 7. In the flexible pavement. the cement treated layer should be designed not to fail by the fatigue before the designed traffic load, and actually the pavement could cover the traffic load to a certain extent under the post-crack phase, therefore farther studies on this phenomena' are required in the design analysis. 8. The finite element computer program (ANALYS) was used for displacement analysis of pavement containing the cement-treated layer, The result showed that the program used for this analysis was proved to be usable.

• 한국자동차공학회논문집
• /
• 제7권6호
• /
• pp.258-269
• /
• 1999

It is important to evaluate fatigue damage of in-service material in respect to assure safety and remaining fatigue life in structure and mechanical components under cyclic load . Fatigue damage is represented by mathematical modelling with crack growth rate da/dN and cycle ration N/Nf and is detected by X-ray diffraction and ultrasonic wave method etc. But this is estimated generally by single parameter but influenced by many test conditions The characteristics of it indicates fatigue damage has complex fracture mechanism. Therefore, in this study we propose that back-propagation neural networks on the basis of ration of X-ray half-value breath B/Bo, fractal dimension Df and fracture mechanical parameters can construct artificial intelligent networks estimating crack growth rate da/dN and cycle ratio N/Nf without regard to stress amplitude Δ $\sigma$.

• 한국지반공학회논문집
• /
• 제21권8호
• /
• pp.13-26
• /
• 2005

모래의 aging현상은 점성토에 비하여 무시할 정도로 매우 작아서 1980년대 초까지는 거의 연구되지 않았다. 그러나 퇴적이나 교란 후 시간경과에 따라 관입저항치의 증가가 관찰되면서 현장시험을 중심으로 모래의 aging 효과에 대하여 활발한 조사가 이루어졌고, 최근에는 현장시험뿐만 아니라 실내시험에서도 여러 연구자들에 의해 모래의 aging 효과가 규명되어지고 있다. 본 연구에서는 모래의 비배수 반복전단거동에 대한 aging효과를 살펴보기 위해 낙동강 모래를 이용하여 상대밀도$(D_r)$, 압밀응력비$(K_c)$ 그리고 압밀시간을 달리하여 비배수 반복삼축압축시험을 실시하였다. 시험결과, 비배수 반복전단강도$(R_f)$는 압밀시간에 따라 증가한다는 사실을 확인할 수 있었다. 본 시험결과에서 나타난 aging 에 따른 $R_f$ 증가율을 이용하여 낙동강 모래지반의 지진규모별 비배수 반복전단강도의 현장적용 범위를 제안하였다.