• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회 2차
• /
• pp.68-75
• /
• 2010

Around the Nakdong River which is one part of the repairing business of 4 Grand Rivers currently being constructed, sandy ground is distributed throughout the wide area. Many civil engineering structures such as small and medium sized dams, flood control basins, and redevelopment of reservoirs and retention reservoirs are scheduled to be constructed, so the prevention measures for liquefaction are surely needed. To identify such liquefaction, a lot of factor affecting the strength of liquefaction were studied through laboratory investigation. Most of the conducted study was about clean sands, but in the case of the real ground the sand can exist not in the clean conditions but in the conditions mostly including sand of fine grained soil. The sand of fine grained soil has become a significant factor to assess liquefaction because many cases of liquefaction happened in the silty and clayer soil. In this study, un-drained tests of plasticity index of fine grained particles were conducted with the sands from Nakdong River. In result, the study shows that dynamic shear strength characteristics differ according to the plasticity index.

• 한국재난정보학회 논문집
• /
• 제15권2호
• /
• pp.186-197
• /
• 2019

연구목적: 본 연구에서는 대변형 효과를 구현할 수 있는 유한요소 해석기법을 기반으로 반복하중에 의한 스테인리스강의 이력거동을 정확하게 평가할 수 있는 비선형 반복소성 손상모델을 개발하였다. 연구방법: 개선된 운동경화 모델과 등방경화 법칙을 연계하여 반복하중 하에서의 재료의 거동을 모사하는데 필요한 반복소성 모델을 개발하였으며, 이를 비선형 손상모델과 결합하였다. 연구결과 및 결론: 제안된 비선형 손상모델을 검증하기 위하여 변형률 제어 단조 및 반복하중 시험을 모사하였으며, 이를 통한 해석결과를 시험결과와 비교하였다. 비교 결과, 본 연구에서 제안한 비선형 손상모델은 스테인리스강의 반복하중 하에서의 이력거동을 정확하게 모사할 수 있음을 확인하였다.

• Computers and Concrete
• /
• 제33권3호
• /
• pp.301-308
• /
• 2024

This paper proposes a numerically-based methodology to implicitly model irreversible deformations in concrete through a damage model. Plasticity theory is not explicitly employed, although resemblances are still present. A scalar isotropic damage model is adopted and the damage variable is split in two: one contributing for stiffness degradation (cracking) and other contributing for irreversible deformations (plasticity). The proposed methodology is thermodynamically consistent as it consists in a damage model rewritten in different terms. Its Finite Element coding is presented, indicating that minor changes are necessary. It is also demonstrated that nonlinear algorithms are unnecessary to model concrete cracking and plasticity. Experimental data from direct tension and four-point bending tests under cyclic loading are compared to the proposed methodology. A numerical case study of a low-cycle fatigue is also presented. It can be concluded that the model is simple, feasible and capable to capture the essentials concerning cracking and plasticity.

• 한국지반공학회지:지반
• /
• 제12권4호
• /
• pp.21-32
• /
• 1996

흙의 응력-변형률 거동을 더욱 근사적으로 예측하기 위하여,소성 증분이론에 한계상태 토질역학의 개념을 도입한 것이 항복-경계면 소성 모델이다. 이 모텔은 등방 압밀 흙의 거동을 묘사하기 위하여 두개의 타원과 하나의 쌍곡선으로 구성되었다. 따라서 사용된 여러가지 매개변수로 인하여 이 모델은 매우 복잡하다. 그러므로,실제 지반 문제에 이 모델을 적용하기 위하여는 이론의 정확한 이해와 숙련이 요구된다. 본 논문에서는,이 모델에 사용된 여러 매개변수들 중항복-경계면 형상 매개변수 R과 A, 투영 중심 매개변수 C를 변화시켜 그 결과를 수치해석하였다. 최종적으로 단조하중과 주기하중에 대한 각각의 민감도를 분석하였고 각 매개변수 값의 범위를 제안하였다.

• 한국지반공학회논문집
• /
• 제19권5호
• /
• pp.69-78
• /
• 2003

화강풍화토의 동결-융해 전후의 동적 거동을 구명하기 위하여 반복삼축압축시험을 수행하였다. 화강풍화토의 실트 함유량 20%이내에서 동결-융해를 받지 않은 공시체와 동결-융해를 받은 공시체를 구속압력을 변화시켜 동적 물성치인 전단탄성계수와 감쇠비의 변화 특성을 고찰하였다. 또한 점성토의 함유량을 각각 다르게 하여 소성지수의 변화에 따른 동결-응해 후의 동적 거동의 변화를 고찰하였다. 연구결과, 화강풍화토의 실트함유량이 증가할수록 전단탄성계수는 감소하였다. 그러나 동일한 밀도, 구속압력의 조건에서 동결-융해를 받은 화강풍화토의 전단탄성계수는 실트함유량에 관계없이 전단탄성계수에 큰 차이가 없었다. 점토를 함유한 소성지수 20이내의 화강풍화토의 전단탄성계수는 소성지수가 클수록 증가하였으며 동결-융해를 받게되면 전단탄성계수의 감소가 뚜렷하게 나타났다.

• Earthquakes and Structures
• /
• 제17권4호
• /
• pp.337-354
• /
• 2019

This paper presents the results of experimental and numerical studies conducted to investigate the behavior of exterior reinforced concrete beam column joints (BCJ) strengthened by using carbon fiber reinforced polymer (CFRP) sheets. Twelve reinforced concrete beam-column joints (BCJ) were tested in an experimental program by simulating the joints in seismically deficient old buildings. One group of BCJs was designed to fail in flexure at the BCJ interface, and the second group was designed to ensure joint shear failure. One specimen in each set was -retrofitted with CFRP sheet wrapped diagonally around the joint. The specimens were subjected to both monotonic and cyclic loading up to failure. 3D finite element simulation of the BCJs tested in the experimental program was carried out using the software ABAQUS, adopting the damage plasticity model (CDP) for concrete. The experimental results showed that retrofitting of the shear deficient, BCJs by CFRP sheets enhanced the strength and ductility and the failure mode changed from shear failure in the joints to the desired flexural failure in the beam segment. The FE simulation of BCJs showed a good agreement with the experimental results, which indicated that the CDP model could be used to model the problems of the monotonic and cyclic loading of beam-column reinforced concrete joints.

• 한국지진공학회논문집
• /
• 제8권6호통권40호
• /
• pp.45-54
• /
• 2004

최근 강구조물의 장경간화 및 고층화로 인하여 고강도강재의 사용이 점차 증가하고 있다. 고강도강재(POSTEN60, POSTEN80)가 적용된 강구조물의 정확한 내진설계를 위해서는 반복하중 작용시 발생하는 대변형 및 비선형반복거동을 구현할 수 있는 해석기법이 필요하다. 본 연구에서는 고강도강재의 단조재하실험 및 반복하중실험을 기초하여 반복소성모델을 제안하였다. 제안된 소성모델과 유한변위이론을 적용한 3차원 탄소성 유한변위해석기법을 개발하였으며 이를 실험값과 비교하여 검증하였다. 검증된 3차원 탄소성 유한변위해석을 이용하여 고강도 원형강교각의 내진해석을 수행하였다. 또한, 고강도 원형강교각의 지름-두께비에 따른 내진성능을 명확히 하였다.

• Structural Engineering and Mechanics
• /
• 제81권1호
• /
• pp.11-28
• /
• 2022

This paper considers the combination of cyclic and axial loads to investigate the hysteretic performance of H-section 6061-T6 aluminum alloy members. The hysteretic performance of aluminum alloy members is the basis for the seismic performance of aluminum alloy structures. Despite the prevalence of aluminum alloy reticulated shells structures worldwide, research into the seismic performance of aluminum alloy structures remains inadequate. To address this deficiency, we design and conduct cyclic axial load testing of three H-section members based on a reliable testing system. The influence of slenderness ratios and bending direction on the failure form, bearing capacity, and stiffness degradation of each member are analyzed. The experiment results show that overall buckling dominates the failure mechanism of all test members before local buckling occurs. As the load increases after overall buckling, the plasticity of the member develops, finally leading to local buckling and fracture failure. The results illustrate that the plasticity development of the local buckling position is the main reason for the stiffness degradation and failure of the member. Additionally, with the increase of the slenderness ratio, the energy-dissipation capacity and stiffness of the member decrease significantly. Simultaneously, a finite element model based on the Chaboche hybrid strengthening model is established according to the experiment, and the rationality of the constitutive model and validity of the finite element simulation method are verified. The parameter analysis of twenty-four members with different sections, slenderness ratios, bending directions, and boundary conditions are also carried out. Results show that the section size and boundary condition of the member have a significant influence on stiffness degradation and energy dissipation capacity. Based on the above, the appropriate material constitutive relationship and analysis method of H-section aluminum alloy members under cyclic loading are determined, providing a reference for the seismic design of aluminum alloy structures.

• Steel and Composite Structures
• /
• 제23권5호
• /
• pp.501-516
• /
• 2017

Numerical simulations are prevalently used to evaluate the seismic behaviour of structures. The accuracy of the simulation results depends directly on the accuracy of the modelling techniques employed to simulate the behaviour of individual structural members. An empirical modelling technique is employed in this paper to simulate the behaviour of column members under cyclic and seismic loading. Despite the common modelling techniques, this technique is capable of simulating two important aspects of the cyclic and seismic behaviour of columns simultaneously. The proposed fiber-based modelling technique captures explicitly the interaction between the bending moment and the axial force in columns, and the cyclic deterioration of the hysteretic behaviour of these members is implicitly taken into account. The fiber-based model is calibrated based on the cyclic behaviour of square hollow steel sections. The behaviour of several column archetypes is investigated under a dual cyclic loading protocol to develop a benchmark database before the calibration procedure. The dual loading protocol used in this study consists of both axial and lateral loading cycles with varying amplitudes. After the calibration procedure, a regression analysis is conducted to derive an equation for predicting a varying calibrated modelling parameter. Finally, several nonlinear time-history analyses are conducted on a 6-story steel special moment frame in order to investigate how the results of numerical simulations can be affected by employing the intended modelling technique for columns instead of other common modelling techniques.

• 전산구조공학
• /
• 제5권1호
• /
• pp.109-118
• /
• 1992

보(Beam)의 횡-비틀림 좌굴(Lateral-Torsional Buckling)에 대한 저항능력을 향상시키기 위해 횡-브레이싱(Lateral Bracing)을 실제 설계에 오랫동안 사용해 왔으나, 횡-브레이싱의 성능에 중요한 인자들은 아직 설계공식에 많이 포함되어 있지 않다. 해석적 모델을 사용하여 아래와 같은 몇개의 인자들에 대한 Parametric Study를 반복하중을 받는 짧은 보에 적용하여 그 영향들을 고찰하고자 한다 : 브레이스의 보 길이 방향의 위치, 브레이스의 보의 절단중심에 대한 높이, 브레이스의 강도와 강성. 일단고정 타단가중 지반(Propped Cantilever)보를 이용하여 Parametric Study를 수행하고, 또한 구조물 전체의 좌굴현상을 잘 포착하기 위해 보와 브레이스에 기하학적 (완전) 비선형의 보 모델을 사용한다. 여기에서 이상화된 브레이스는 보 단면의 횡방향의 이동은 구속하지만 회전은 자유롭게 하도록 한다. 또한 금속의 주기적 소성(Cyclic Plasticity)거동을 보다 잘 나타내기 위해 다축 주기적 소성 모델을 Consistent Return Mapping Algorithm과 결합시켜 적용한다.