• 제목/요약/키워드: cyclic action

검색결과 181건 처리시간 0.023초

전통 목조 프레임구조의 지진하중에 대한 거동 특성 (Behavior of Traditional Wood Frames Under Earthquake Loading)

  • 홍성걸
    • 한국지진공학회:학술대회논문집
    • /
    • 한국지진공학회 2000년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 2000
    • /
    • pp.304-313
    • /
    • 2000
  • This study presents the behavior of traditional wood structures of national heritage under earthquake loadings. A series of experimental program for four wood frames was performed to investigate characteristics of initial stiffness, behavior after ultimate loads, and hysteretic behaviors. The frames consisted of columns with a lintel by special joint and a bare frame was infilled by a mud wall. A pushover est was aimed to estimate the range of ultimate rotation of connection as a pilot test for cyclic load tests. One of frames infilled by a mud wall showed a larger stiffness than those of bare frames due to a strut action in the diagonal direction. However, the post yielding stiffness of the infilled frame was not increased.

  • PDF

리브로 보강된 철골 모멘트 접합부의 내전거동에 관한 실험적 연구 (An Experiment Study of Cyclic Seismic Behavior of Steel Moment Connections Reinforced with Ribs)

  • 이철호;이재광;정종현;오명호;구은숙
    • 한국지진공학회:학술대회논문집
    • /
    • 한국지진공학회 2002년도 춘계 학술발표회 논문집
    • /
    • pp.317-326
    • /
    • 2002
  • Recently a simple design method for rib-reinforced seismic steel moment connections has been proposed based on equivalent strut model. An experimental program was implemented to verify the proposed design method and to develop the schemes that will prevent the cracking at the rib tip, where stress concentration was evident. All the specimens designed by the proposed method were able to develop satisfactory connection plastic rotation of 0.04 radian. Slight beam flange trimming, in addition to rib reinforcement, pushed the plastic hinging and local buckling of the beam away from the rip tip and effectively reduced the cracking potential at the rib tip. The strut action of the rib and resulting reverse shear in the beam web were also experimentally identified through the strain gage readings.

  • PDF

벽체-슬래브 구조시스템에서의 슬래브의 커플링 효과 (A Coupling Effect of the Slab in Wall-Slab Structural Systems)

  • 장극관;천영수;서대원
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2001년도 봄 학술발표회 논문집
    • /
    • pp.417-422
    • /
    • 2001
  • This paper is investigated the coupling effect in slab-wall structural system. An experimental investigation of reinforced concrete wall-slab structures were peformed. For the purpose of this study slab-wall substructures of an apartment building were chosen. And two specimens with different aid ratios have been tested. There were subjected to reserved cyclic loading, consistent with coupling action, with increasing imposed inelastic deformations. From. the result of this test, 1) in slabs, the coupling stress are not uniform across the width, 2) cracks are tending to be concentrated in the regions near the inner edges of the walls, 3) the effective width used in previous theoretical or model studies may not be enough.

  • PDF

용접이음 된 유압 실린더용 로드/너클 조립체의 피로거동 해석 (Fatigue Behavior Analysis of Welded Rod/Knuckle Assembly for Hydraulic Cylinder)

  • 이환우
    • 한국기계가공학회지
    • /
    • 제12권4호
    • /
    • pp.93-99
    • /
    • 2013
  • Parts and structures such as piston rod and knuckle joint for the use of hydraulic cylinder are often welded together in some fashion, usually due to cost and process effectiveness. Welding strongly affects the material by the process of heating and subsequent cooling as well as by the fusion process with additional filler material. Furthermore, a weld is usually far from being perfect, containing inclusions, pores, cavities, undercuts etc. As a consequence, fatigue failures appear in welded structures mostly at the welds rather than in the base metal, even if the latter contains notches. For this reason, fatigue analyses are of high practical interest for all welded structures under the action of cyclic loads. This paper describes the influence of welding parameters, material combinations and heat treatment on the fatigue behavior of welded cylinder rod. In addition, statistical characterization of stress-life response in weldment of hydraulic cylinder rod are presented.

TANGENTIAL REPRESENTATIONS AT ISOLATED FIXED POINTS OF ODD-DIMENSIONAL G-MANIFOLDS

  • Komiya, Katsuhiro
    • 대한수학회보
    • /
    • 제45권1호
    • /
    • pp.33-37
    • /
    • 2008
  • Let G be a compact abelian Lie group, and M an odd-dimensional closed smooth G-manifold. If the fixed point set $M^G\neq\emptyset$ and dim $M^G=0$, then G has a subgroup H with $G/H{\cong}\mathbb{Z}_2$, the cyclic group of order 2. The tangential representation $\tau_x$(M) of G at $x{\in}M^G$ is also regarded as a representation of H by restricted action. We show that the number of fixed points is even, and that the tangential representations at fixed points are pairwise isomorphic as representations of H.

가토(家兎)의 신장기능(腎臟機能)에 미치는 측뇌실내(側腦室內) cAMP의 영향(影響) (Influence of Intraventricular cAMP on the Renal Function of the Rabbit)

  • 국영종;최봉규
    • 대한약리학회지
    • /
    • 제13권2호
    • /
    • pp.35-39
    • /
    • 1977
  • Cyclic adenosine monophosphate (cAMP), known as a versatile regulator of cellular processes and as a secondary messenger of various hormones and other biogenic agents, such as prostaglandins and histamine, induced prompt and transient antidiuresis followed by mild natriuresis and diuresis, when it was administered into the lateral ventricle of the rabbit in doses ranging from $100\;{\mu}g$ to 1 mg. The initial antidiuresis was brought about by the systemic hypotension, whereas the secondary diuresis seemed to be resulted from the decreased tubular reabsorption of sodium, suggestive of participation of certain endogenous natriuretic agent. This observation suggests that cAMP might be involved in the center-mediated renal action of prostaglandins.

  • PDF

RC 부재 균열면에서의 전단력 전달에 관한 고찰 (Shear Transfer across Cracks in Reinforced Concrete Members)

  • 홍성걸;하태훈
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2000년도 봄 학술발표회 논문집
    • /
    • pp.527-532
    • /
    • 2000
  • Cracks in reinforced concrete members are important element in structural analysis and design. It is clear from the test results that shear strength of cracked member is remarkably degraded compared with uncracked one. However, considerable amount of shear resistance by such mechanisms as aggregate interlock and dowel action is still active. There are various approaches to shear transfer estimation including finite element analysis, fracture mechanics, upper bound theory of plasticity, etc., but working out comprehensive and consistent models and manageable equations is rather difficult and remains to be improved. Shear transfer problems under cyclic loading and effective compressive strength of cracked concrete have not been adequately investigated and need further systematic research.

  • PDF

하중이력을 받은 콘크리트 압축공시체의 탄소섬유쉬트 보강효과에 관한 실험적 연구 (An Experimental Study on the Strengthening Effect of CFS on Concrete Cylinder under Load History)

  • 배주성;김경수;김재욱;고영표
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제4권3호
    • /
    • pp.169-176
    • /
    • 2000
  • In the strengthening of the existed reinforced concrete(RC) structures, it is required that the more rational strengthening method and the amounts of strengthening materials would be decided under the consideration of the present state of RC structures. Therefore, this study examined the strengthening effects of concrete cylinders strengthened with carbon fiber sheet(CFS). In this studying we modeled the reduction of internal forces and the initial strains of concrete cylinders as the load history over the elastic limit. From the results, it revealed that the strengthening of two layer CFS was more effective on the concrete cylinders under the action of load history such as cyclic and cracking load.

  • PDF

온수 보일러용 열구동 펌프에 관한 연구 (A Study on the Thermal Pump of the Hot Water Boiler)

  • 염한길;김욱중;김창주
    • 연구논문집
    • /
    • 통권30호
    • /
    • pp.15-23
    • /
    • 2000
  • In this study, develop the thermal pump using water evaporation and condensation. Vapor from heating room moves up to pumping room and press the water of pumping room. Consequently water is pumped out to water tank. Then hot vapor direct contact with cold water in condensing room after pumping process. At this time, pressure of condensing room is down to-5kPa and suck in water of tank. This pump executes self ping and good durability because of no mechanical moving parts. Thermal pump is pumped cyclic so that, this pump is not used single. Therefore thermal pump of hot water boiler used to multi-stage for stable pumping rate. As the result of performance test, the developed thermal pump proves pumping action of water evaporation/condensation. And total volume flow rate is 500liter during one hour. If three thermal pump is installed parallel, this pump can use to the hot water boiler in the 300,000kcal/h class.

  • PDF

FREE ACTIONS OF FINITE GROUPS ON 3-DIMENSIONAL NILMANIFOLDS WITH HOMOTOPICALLY TRIVIAL TRANSLATIONS

  • Koo, Daehwan;Park, Eunmi;Shin, Joonkook
    • 충청수학회지
    • /
    • 제33권1호
    • /
    • pp.113-132
    • /
    • 2020
  • We show that if a finite group G acts freely with homotopically trivial translations on a 3-dimensional nilmanifold 𝓝p with the first homology ℤ2 ⊕ ℤp, then either G is cyclic or there exist finite nonabelian groups acting freely on 𝓝p which yield orbit manifolds homeomorphic to 𝓝/𝜋3 or 𝓝/𝜋4.