• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.06b
• /
• pp.163-170
• /
• 2006

Together with the trend of enhancement in domestic industrial development and economic progress due to import and export, the demand for construction of the roads, bridges, especially port facilities, and several coastal protection and ocean structures is increasing rapidly. MOMAF of Korean Government is driving construction of 9 new ports and renovation of the existing fishery ports. Among these structures most of bridge base, wharves, dolphins, quays, and jetties are being newly built of steel or concrete pile. As the base, supporting bulkheads, and piles are underwater after construction, it is difficult to figure out the status of structures and not enough to get maintenance and strengthen the structures. Every year, moreover, these works suck the government budget due to higher incomplete maintenance expense for protection from corrosions of structures and increased underwater construction period. For the purpose of cutting down the expense of government budget, it is necessary to extend the life cycle of the existing structures. Therefore, we developed a new method for maintenance of submerged structures near the waterline by allowing dry work environment with the floating caisson. The method shows easy to move around the working area and handle. It also showed not only a significant reduction maintenance expenses and time for anti-corrosion work but also better protection. This will be a milestone to reduce the maintenance and construction expenses for the shore and water structures.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.28 no.3
• /
• pp.283-291
• /
• 2018

Objectives: To monitor the radon concentration level in plants that handle phosphorus rock and produce gypsum board and cement, and evaluate the effective dose considering the effect of radon exposure on the human body. Methods: Airborne radon concentrations were measured using alpha-track radon detectors (${\alpha}$-track, Rn-tech Co., Korea) and continuous monitors (Radon Sentinel 1030, Sun Nuclear Co., USA). Radon concentrations in the air were converted to radon doses using the following equation to evaluate the human effects due to radon. H (mSv/yr) = Radon gas concentration x Equilibrium factor x Occupancy factor x Dose conversion factor. The International Commission on Radiological Protection (ICRP) used $8nSv/(Bq{\cdot}hr/m^3)$ as the dose conversion factor in 2010, but raised it by a factor of four to $33nSv/(Bq{\cdot}hr/m^3)$ in 2017. Results: Radon concentrations and effective doses in fertilizer manufacturing process averaged $14.3(2.7)Bq/m^3$ ($2.0-551.3Bq/m^3$), 0.11-0.54 m㏜/yr depending on the advisory authority and recommendation year, respectively. Radon concentrations in the gypsum-board manufacturing process averaged $14.9Bq/m^3$ at material storage, $11.4Bq/m^3$ at burnability, $8.1Bq/m^3$ at mixing, $10.0Bq/m^3$ at forming, $8.9Bq/m^3$ at drying, $14.7Bq/m^3$ at cutting, and $10.5Bq/m^3$ at shipment. It was low because it did not use phosphate gypsum. Radon concentrations and effective doses in the cement manufacturing process were $23.2Bq/m^3$ in the stowage area, $20.2Bq/m^3$ in the hopper, $16.8Bq/m^3$ in the feeder and $11.9Bq/m^3$ in the cement mill, marking 0.12-0.63 m㏜/yr, respectively. Conclusions: Workers handling phosphorous gypsum directly or indirectly can be assessed as exposed to an annual average radon dose of 0.16 to 2.04 mSv or 0.010 to 0.102 WLM (Working Level Month).

• Journal of Korean Society of Forest Science
• /
• v.20 no.1
• /
• pp.45-50
• /
• 1973

This study was investigated the methods of vegetative propagation for new Lespedeza varieties. Experimental matterials were used 6 Lespedeza species; L. maximowiczii, L. cyrtobotrya, L. angustifolioides, L. bicolor, L. maximowiczii var. tomentella, and L. japonica var. intermedia. In April a year branches were cut 15-20cm length and 3-4mm thickness and planted in sand bed (depth 150cm) to be sterilized by the 0.1% solution of Uspulun. And then the cutting beds were irrigated and shaded. The results are as follows. 1. The rooting rates of the cuttings could be found so variable among varieties from 69% of L. maximowiczii var. tomentella to 50.3% of L. japonica var. intermedia. 2. The growth performance showed statistically significant difference at 1% level among varieties. L. maximowiczii was the best, while L. japonica var. intermedia showed the wrost growth performance of them. 3. The average number of roots with more than 5 cm length per stock was revealed statistically significant difference at the 1% level among varieties from the greatest number of 6.4 of L. maximowiczii var. tomentella to the smallest number of 2.3 of L. japonica var. intermedia. 4. Total average length of the roots per stock was statistically significant so different at 1% level from the longest 279.8cm of L. maximowiczii var. tomentella to the shortest 41.1cm of L. japonica var. intermedia. 5. The average ndules with more than 1 mm in diameter per stock was statistically significant so different at 1% level among varieties from the greatest number of 34.4 of L. maximowcizii to the smallest numqer of 4.6 of L. japonica var. intermedia.

• Korean Journal of Breeding Science
• /
• v.41 no.4
• /
• pp.552-555
• /
• 2009

A new standard rose cultivar "Snow Day" was bred from the cross between pink standard cultivar "Saphia" and pink standard cultivar "Bridal Beauty" at the National Institute of Horticulture & Herbal Science. The cross was made in 2003 and "Snow Day" was finally selected in 2008 after evaluating characteristics for three years from 2006 to 2008. A white standard cultivar, "Snow Day" grows vigorously and resistant to powder mildew. The major characteristics of this cultivar are $152stems/m^2/year$ in yield, 81.8 cm in length of cut flower, 11.3 cm in flower diameter, 29.2 in petal number, and 13.7 days in vase life. This cultivar can be propagated by both cutting and grafting. The consumer's preference for this cultivar is relatively higher than that for the control cultivar, "Tineke".

• Korean Journal of Breeding Science
• /
• v.41 no.4
• /
• pp.616-619
• /
• 2009

A new standard rose cultivar "Red Charm" was bred from the cross between deep red standard cultivar "First Red" and light red standard cultivar "Cardinal" at the Jeollanamdo Agricultural Research and Extention Services (JARES). The cross was made in 2003 and, "Red Charm" was finally selected in 2008 after investigating characteristics for three times from 2007 to 2008. "Red Charm", a red standard cultivar has good flower shape and velvet flower color. The major characteristics of this cultivar are on average $119.3stems/m^2/year$ in yield, 69.5 cm in length of cut flower, 10.3 cm in flower diameter, 36.9 in petal number, and 9.8 days in vase life. This cultivar can be propagated by both cutting and grafting. The consumer's preference of this cultivar, "Red Charm" is relatively higher than that of control cultivar, "Red Velvet".

• Korean Journal of Breeding Science
• /
• v.43 no.6
• /
• pp.528-531
• /
• 2011

A new spray rose cultivar 'Cherry Tea' was bred from a cross between pink spray cultivar 'Pinocchio' and yellow spray cultivar 'Flair' at the National Institute of Horticultural Research Institute. The cross was made in 2003 and 'Cherry Tea' was finally selected in 2008 after evaluating characteristics for three years from 2006 to 2008. 'Cherry Tea', a light orange spray cultivar grows vigorously and has good vase life. The major characteristics of this cultivar are $137stems/m^2/year$ in yield, 68.8 cm in length of cut flower, 5.5 cm in flower diameter, 34.0 in petal number, and 12.4 days in vase life. This cultivar can be propagated by both cutting and grafting. The consumer's preference of this cultivar is relatively higher than that of control cultivar, 'Little Marble'.

• FLOWER RESEARCH JOURNAL
• /
• v.19 no.4
• /
• pp.251-254
• /
• 2011

A new standard white-pink flower rose cultivar 'Innocence' was bred from the cross between white standard cultivar 'Juvena' and green-white standard cultivar 'Green Success' at the Jeollanamdo Agricultural Research and Extension Services (JARES). The cross was made in 2001 and, 'Innocence' was finally selected in 2006 after investigating characteristics for three times from 2004 to 2006. 'Innocence' a white-pink standard cultivar has good flower shape with few prickles. The major characteristics of this cultivar were $118.7stems{\cdot}m^{-2}$ in year yield, 68.0 cm in length of cut flower, 10.9 cm in flower diameter, 34.4 in petal number, and 10.7 days in vase life. This cultivar can be propagated by both cutting and grafting. The consumer's preference of this cultivar was relatively higher than that of control cultivar, 'Rose Yumi'.

• FLOWER RESEARCH JOURNAL
• /
• v.19 no.3
• /
• pp.164-167
• /
• 2011

A new spray rose cultivar 'Glory Purple' was bred from the cross between a pink spray cultivar 'Macarena' and a pink spray cultivar 'Million Pink' at the National Institute of Horticulture & Herbal Science. The cross was made in 2004 and a candidate genotype which named as 'Glory Purple' was selected in 2009 after three years investigation for agronomical characters from 2007 to 2009. 'Glory Purple', a purple colored spray cultivar, has vigorous growth and has powdery mildew resistance. The major characteristics of this cultivar are high yield and long stem with relatively large flower size with $157stems/m^2/year$ in yield, 63.5 cm in mean length of cut flower, 6.8 cm in mean flower diameter, 25.78 in mean petal number, and 10.2 days in mean vase life. This cultivar is suitable for propagation by both cutting and grafting methods. The consumer's preference of this cultivar is relatively higher than that of the control cultivars, 'Pinky and Charming'.

• Korean Journal of Breeding Science
• /
• v.41 no.3
• /
• pp.284-287
• /
• 2009

A new spray rose cultivar "Morning Star" was bred from the cross between orange spray cultivar 'Macarena' and yellow spray cultivar 'Lion Sunshine' at the National Institute of Horticultural Research Institute. The cross was made in 2002 and "Morning Star" was finally selected in 2007 after investigating characteristics for three years from 2005 to 2007. "Morning Star", a orange spray cultivar grows vigorously and has good flower shape. The major characteristics of this cultivar are 170.2 stems/$m^2$/year in yield, 57.4cm in length of cut flower, 5.5cm in flower diameter, 48.5 in petal number, and 11.4 days in vase life. This cultivar can be propagated by both cutting and grafting. The consumer's preference of this cultivar is relatively higher than that of control cultivar, 'Sunny Lady'.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.4
• /
• pp.483-489
• /
• 2019

With development of digital dentistry, the 3-dimensional (3D) manufacturing industry using computer-aided design and computer-aided manufacturing (CAD/CAM) has grown dramatically in recent years. Denture fabrication using digital method is also increasing due to the recent development of digital technology in dentistry. The 3D manufacturing process can be categorized into 2 types: subtractive manufacturing (SM) and additive manufacturing (AM). SM, such as milling is based on cutting away from a solid block of materal. AM, such as 3D printing, is based on adding the material layer by layer. AM enables the fabrication of complex structures that are difficult to mill. In this case, additive manufacturing method was applied to the fabrication of the resin-based complete denture to a 80 year-old patient. During the follow-up periods, the denture using digital method has provided satisfactory results esthetically and functionally.