• 한국지반환경공학회 논문집
• /
• 제6권2호
• /
• pp.21-30
• /
• 2005

본 연구의 목적은 식생공법이 적용된 전국의 비탈면에 대한 식생의 공학적 효과를 평가하는데 있다. 대상사면의 공학적 특성은 지표지질조사와 물리실험결과를 이용하여 평가하였다. 통계적 분석결과, 지층조건과 피복도가 상호 독립적인 관계를 보이므로 일률적인 지층분류보다 절리의 발달여부, 절리의 방향성, 개구폭, 표토층 상태와 같은 식생의 조건이 더욱 중요한 인자로 평가될 수 있을 것이다. 시공초기의 음각부의 형성상태와 절리현황, 사면의 기하적 형상과 같은 공학적 조건들과 함께 주변 자생종에 대한 검토 등 생태학적 조건들이 고려됨으로써 비탈면의 조기 녹화에 좀 더 합리적인 접근이 이루어질 수 있을 것으로 판단된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 봄 학술발표회 논문집
• /
• pp.183-190
• /
• 2001

There are complicated and big shear zone which is about several tens meter in the middle of the cutting slope in this study area. And slope stability analysis is very hard because many fault zones are gathered in the shear zone. This study furnish imformations of scrutinized geological survey, numerical stability analysis, reinforcement work analysis and computation of ground mass properties. Then this offer rational slope stability analysis, rock mass decision and counterplan.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.577-580
• /
• 2008

The purpose of this study is the stability evaluation of soil slope according to inclination of upper natural slope. Upper natural slope breeds loss of slope by inflow in slope of surface water by rainfall and fluctuation of amount of materials in slope through method of cutting slope according to degree of inclination. Basis of standard inclination does not consider of inclination of upper natural slope and is presented uniformly. Therefore, in this study, analyzed stability of inclination of upper natural slope through limit equilibrium analysis.

• 한국구조물진단유지관리공학회 논문집
• /
• 제12권4호
• /
• pp.107-114
• /
• 2008

현재 각 관리 주체별로 절토사면에 대한 유지관리를 시행하고 있으나 평가항목 및 평가모형이 다양하고 접근방법이 상호보완적이지 못하므로 보편성 및 객관성이 부족한 실정이다. 따라서, 본 연구는 기존 절토사면 평가기법에 대한 분석을 통하여 합리적인 모형개발을 위한 접근을 시도하고 붕괴사례 분석을 통하여 붕괴 주요원인 및 인자를 발굴하고 이를 계층분석기법(AHP)을 이용하여 기존 절토사면의 조사 평가단계에서 조사우선순위를 결정하기 위한 평가표를 작성하였다.

• 한국환경복원기술학회지
• /
• 제9권1호
• /
• pp.100-111
• /
• 2006

This study was carried out to increase the efficiency of site investigation through the evaluation of the applicable methods of investigation for cutting slope design. In an effort to find out the applicability of the method employed during the slope investigation, some tests were carried out on 6 subjects i.e location of weak zones, characteristics of discontinuities, distribution of strata, in situ tests for geo-technical properties, laboratory test and estimation of weathering. The method was highly applicable and produced expected results during the test of weak zones, discontinuities and distribution of strata. In order to apply the method to in- situ test for geo-technical properties and laboratory test on soil and rock slope, a statistic analysis of the existing data were required in advance. However its design applicability on rock slope was good although actual cases of application were not many due to limitation of the cases for investigation. The method was frequently referenced but not actually applied for anti seismic design test and estimation of weathering.

• 자원환경지질
• /
• 제33권1호
• /
• pp.77-88
• /
• 2000

The goal of this study is to assess the spatial distribution of natural slopes and cutting slopes under would-be development. For this goal, a quantitative slope stability analysis method using GIS integrated with a computer program was developed. Through field investigations, the discontinuity parameters were collected such as orientation of discontinuity, persistence, spacing, JRC, JCS, and water depth. The distributions were interpolated from the ordinary kriging method in ARC/INFO GIS after variogram analysis. The layers showing all parameters needed for limit equilibrium analysis were constructed. The final layer using GIS works composed of 162,352 polygons, that is, unit slopes. The rock slope stability analysis program was coded by C++ language. This program can calculate geometrical vectors related to rock block failures using input orientation data and direction and dimension of strength to occur failure. Also, this can calculate shear strength of joints through empirical equations and quantitative factors of safety. This methodology was applied to the study area which is located in Jaecheon city and Danyang-gun of the northeastern Keumsu is about 135$km^2$. As a result, the study area was entirely stable but unstable, that is, factor of safety less than 1.0dominantly at the slopes near Keumsil, Daejangri, Keumsungmyun and Sojugol, Mt. Dongsan, Juksongmyun by the natural slope stability analysis. Assuming the cutting slope showing the same direction immediate, and quantitative analysis of factors of safety for a regional area could be conducted through GIS integrated with a computer program of limit equilibrium.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1400-1405
• /
• 2008

Execute surface of the earth geological survey for stability analysis of stealing cutting sides and investigated wide area nature of soil structure. Inflected DIPS that measure discontinuity's direction that develop to slope and is slope stability a wide use program for Stereographic Projection Method analysis that utilize geometrical correlation of stealing four sides and discontinuity surface. It is principle that angle of internal friction that is basis element of stability estimation applies direct shear test result on joint side, Examination is impossible by case execution, suppose by 30 angles that apply more conservatively in base rock slope sides usually and achieved analysis. When analyze, consider discontinuity's various adult that develop in research slope, after conduct first each discontinuity different assay falling into fault, joint, executed stability estimation which synthesize whole discontinuity data. When ailment element is recognized as analysis result, wished to present stability countermeasure way of most suitable to take into account of execution, stability, economic performance.

• 한국산림과학회지
• /
• 제82권4호
• /
• pp.381-395
• /
• 1993

이 연구는 임도(林道)의 절취(切取)비탈면에서 자연적인 식생천이과정(植生遷移過程)을 구명하고, 효과적인 비탈면 속성녹화공법(速成綠化工法)을 개발하기 위하여, 전국에 개설된 임도(林道) 중 녹화공법(綠化工法)을 적용하지 않은 임도(林道)와 녹화공법(綠化工法)을 적용한 임도(林道)를 대상으로 조사하였고, 파종(播種)실험은 서울대학교(大學校) 산림자원학과(山林資源學科) 묘포(苗圃)에서 실시하였다. 임도(林道)비탈면에 자연적으로 침입하고 있는 식생 중 목본(木本)의 경우는 소나무, 싸리, 산딸기 등이며, 초본(草本)의 경우는 새류, 큰까치수영, 쑥류 등의 순으로 침입하여, 임도개설후(林道開設後) 5년이 경과된 후의 식생피복도(植生被覆度)는 약 30%로 나타났다. 또한 소규모의 토사(土砂)비탈면에서는 등고선상(等高線上) 세구(細溝)내에 산파(散播)를 하고 거적으로 피복(被覆)하는 공법(工法)이 녹화효과(綠化效果)가 매우 우수하였다. 임도(林道)비탈면에서는 임도개설시(林道開設時)에 비탈면 녹화안정공사(綠化安定工事)를 시행하는 것이 효과적(效果的)이며, 그 지역의 자생식물(自生植物)을 활용하여 속성녹화공법(速成綠化工法)을 적용함이 더욱 효과적일 것이다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.1154-1160
• /
• 2009

Cut slope failure is happened in various form by several causes. In this study, we searched causes of cut slope failure shortly, and we made a study of slope failure by excessive under cut. Under cutting slope does to add unstability. Thereby, cut slope failure can be happened on a large scale.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.580-585
• /
• 2004

The purpose of this study is the stability evaluation of soil slope according to inclination of upper natural slope. Upper natural slope breeds loss of slope by inflow in slope of surface water by rainfal1 and f1uctuation of amount of materials in slope through method of cutting slope according to degree of inclination. Basis of standard inclination does not consider of inclination of upper natural slope and is presented uniformly. Therefore, in this study, analyzed stability of inclination of upper natural slope through limit equilibrium analysis. Result is same as following. First, safety factor through limit equilibrium analysis is almost direct decrease when gradient of soil slope is 1:1.2, 1:1.5. However, when gradient of soil slope is 1:1.0, 1:0.7, if sinclination of upper natural slope are $20^{\circ}$, it shows tendency that decrease of safety factor becomes low rapidly. Second, when when gradient of soil slope is fixed, inclination of upper natural slope increase tendency(maximum 3.0 times) that decrease of safety factor.