• 한국추진공학회지
• /
• 제5권2호
• /
• pp.51-58
• /
• 2001

본 연구에서는 이중동축노즐로부터 대기로 방출되는 초음속 자유제트유동을 실험하였다. 출구마하 수가 2.0이고 충돌각이 다른 축소확대노즐 및 출구마하수가 1.0이고 충돌각이 다른 축소노즐을 사용하고, 주제트 압력비와 보조제트 압력비를 각자 4.0∼10.0, 1.0∼4.0으로 변화시켜 가면서 자유제트 유동장 특성을 조사하였다. 본 연구의 결과로부터 보조제트 압력비가 동축자유제트유동 특성에 영향을 미치며, 주제트 및 보조제트 압력비가 증가할수록 동축제트의 초음속 길이도 증가한다는 것을 알았다.

• 한국의상디자인학회지
• /
• 제11권2호
• /
• pp.75-84
• /
• 2009

The following research analyzed the sewing teaching of the tailored jacket shown in fashion textbooks, which are currently used in universities and educational organizations in the fashion industry. To analyze the sewing teaching of tailored jackets, we analyzed 35 textbooks in the market. Among them we used 14 textbooks which dealt with the patter formation method of tailored jackets, and cutting and sewing methods. First, the stitching direction and the location of attachment varied. The type of sticking tape and its position also differed, emphasizing the need to make an institutionalized education material which is based on the characteristic of the fabric and its silhouette. Second, controlling the ease length of the right side sewing princess line, or information about the shoulder line and sleeve line of the notch as not specifically shown in the textbooks. Furthermore, not many textbooks showed how to pull the lower part of the texture out of sight, nor did they explain why this needed to be done. Third, the lining is usually slightly larger than the outer texture of the clothing, as the lining is usually tugged in the sewing process, and this method makes the clothes more comfortable. The method of sewing the princessline $0.2{\sim}0.3cm$ outside the outer pattern was the most recommended. The center-back side was usually 2cm in activity measurements, but it turned out that a textbook which required ease treatment on the shoulder line did not do so on the lining material. The textbooks used in this research dealt only with how to manufacture a tailored jacket without full explanation about textures which could influence the manufacturing. The production method and process differed between different textbooks, showing the need to make a institutionalized education material. In a quickly-changing era where there is rapid change in the dressmaking procedure, we need to help students understand the process more easily through a formalized education process.

• 한국조경학회지
• /
• 제28권1호
• /
• pp.109-117
• /
• 2000

The purpose of this study is to examine the effect factors in suburban rural landscape and significant factors of apartment complex which are effective to the skyline of the sloped mountains. Also it is to propose the basic resources to preserve and improve the suburban rural landscape. The target site is Young-In, which shows the typical of rural development. Sides were take in young-In City along the roads and selected for 20 pieces. This study used questionnaire about the suburban rural landscape surveying of 45 students in Kyunghee Univ.. Also we found 2 dependent variables and 8 independent variables totally. Moreover, we have analyzed the data using descriptive statistics, correlation analysis, and multiple linear regression method between the preference and physical factors, and between the vulnerability and perceptional factors. The results are as follows: 1) With the dependent variable of preference, the areas of "green space" and "agricultural productive lands" were highly influenced in the suburban rural landscape positively, but the areas of "apartment complex" and "other buildings" were negatively effected. 2) With the dependent variable vulnerability, the area "apartment complex" and cutting numbers of the "skyline of mountainous ridge" were proved as significantly positive factors, but the length of the "skyline of mountainous ridge" turned out to be a negative factor. Although this study has the difficulty to be generalized, it can be used for planning and designing of the apartment complex in suburban rural landscapes, and it will provide the basic guideline for preserving and managing of the suburban rural landscapes.uideline for preserving and managing of the suburban rural landscapes.

• 한국전자파학회논문지
• /
• 제20권2호
• /
• pp.161-166
• /
• 2009

본 논문에서는 TDMB와 KPSC를 지원하는 내장형 안테나를 제안한다. 제안된 안테나는 서로 다른 유전율을 가지는 안테나가 결합된 형태이며, 휴대폰에 적합한 작은 사이즈($45{\times}8{\times}8\;mm$, 약 2.8 cc)를 갖는다. TMDB 안테나는 각 셀간의 전류 흐름을 최대화 시킨 맴돌이 구조로 설계되었으며, KPCS 안테나는 휴대폰에 많이 사용되는 PIFA 형태로 설계되었다. TMDB 안테나는 부족한 공진 길이를 보상하기 위해 100 nH 이상의 인덕터가 사용된다. 이때, 인덕터는 높은 주파수 신호를 차단함으로 TDMB에서의 KPCS 주파수 입력은 차단된다. 또한, KPCS 대역에서 TDMB 안테나의 방사부는 기생 소자로 동작하기 때문에 각 밴드 간의 격리도 특성이 우수하다. 제안된 안테나는 CST Microwave Studio를 이용하여 설계하였으며, 전자파 무방향실에서 특성을 측정하였다. 제안된 안테나는 TMDB 대역에서 $-6{\sim}-14\;dBi$의 이득을 가지며, KPCS 대역에서 $-3.5{\sim}-5\;dBi$의 이득을 갖는다.

• 한국생산제조학회지
• /
• 제23권1호
• /
• pp.94-101
• /
• 2014

Recently, in order to reduce the time required to replace an optical jumper cord, many researchers are using a field-installable connector and applying the ferrule polishing method, ferrule mechanical contact method, or ferrule fusion contact method. However, the process of arranging the length of the optical fiber, i.e., inserting the optical fiber into the ferrule by hand and checking its cross section, takes 60% of the time required for the entire process, which increases the overall cost. Therefore, in order to make this task more cost-effective, we will develop an automated inspection system with automatic cross-sectional arrangement of a field-installable connector. This system will be able to decrease the failure rate from 10% to 2% compared with the conventional method when cutting the optical fiber inserted into the ferrule. It will also improve the productivity by decreasing the test time by 28% compared with the conventional method. Our studies showed that it was possible to reduce the production costs and improve the quality of a field-installable connector, and we expect it to dominate the market.

• Journal of the Korean Wood Science and Technology
• /
• 제10권3호
• /
• pp.168-179
• /
• 1982

The first step to utilize the growing resources of Italian poplar (Populus euramericana I-476) for pulp-Woods, its characteristics and adaptabilities to the pulp industry must be investigated completely. The plantation methods are important for its fast growing in stock, and no less important is the cutting age for its utilization as pulpwood. In this paper, the stone groundwood pulping, refiner groundwood pulping and chemi-groundwood pulping characteristics by the age of tree, along with their physical and chemical characterstics were tested, and relationships between the age groups were analyzed to find out the optimum felling age. The results obtained are as follows: 1. The coefficient of pliability was a little higher in the case of younger trees. 2. The water retention value of each pulp was directly proportional to its physical strength, but this tendency was not detected between the age groups of sample woods. 3. Generally, the physical strength of younger wood pulp was lower regardless of the pulping process. But in the case of pretreatment with NaOH, Asphund and CGP pulp from 5 year old sample wood were stronger in physical strengths than those of GP and Asplund pulp with no pretreatment from 10 years old sample wood. 4. The tear factor of Asplund pulp with alkali pretreatment was higher than that of CGP pulp but the breaking length and the burst factor was similar in all processes. Considering the pulp yield and its brightness, CGP process seems to be advantageous. 5. The dissimilarity of physical strength between 7 and 10 years old wood pulp was not very large in all pulping processes but the physical strength of 5 year old wood pulp was very weak. In the of groundwood pulping from Italian poplar woods, 5 year old wood pulp should be mixed with other long fiber pulp for making a good paper.

• 대한기계학회논문집A
• /
• 제38권3호
• /
• pp.235-241
• /
• 2014

심해 군사 작전에서 유도체의 타격 성능 향상은 모함과 유도체가 광 케이블을 통하여 안정적인 통신을 유지함으로써 가능하다. 이 때 광 케이블은 엉킴 및 절단과 같은 풀림 불량을 방지하기 위해 보호 튜브에 의해 보호된다. 또한 보호 튜브는 전단 핀에 의해 유도체와 연결되며, 전단 핀의 파손에 의해 유도체는 보호 튜브와 분리된다. 따라서 본 연구에서는 유도체 및 보호 튜브를 모델링하고, 유도체의 운동에 따른 보호 튜브의 풀림 거동을 분석하며 전단 핀에 작용하는 동적 하중을 예측한다. 유도체와 보호 튜브는 질점으로 구성하며, 일정 길이 구속으로 연결한다. 전단 핀에 작용하는 하중은 실험 결과와 비교 검증하며, 이를 바탕으로 보호 튜브의 거동을 예측한다.

• 한국대기환경학회지
• /
• 제9권3호
• /
• pp.191-199
• /
• 1993

This paper describes the results of a systematic study to determine the characteristics of particle generated from various types of asbestos containing material(ACM) and manmade fiber material(MMFM) during operations of cutting and grinding in laboratory and workplace. Tests were conducted with a specially designed glove box which allowed complete sampling of the generated asbestos fibers. Specificially, air measurements were made during ACM and MMFM installation in building. All personal air samples collected were identified by polarized light microscopy(PLM), X-ray diffraction(XRD) and scanning electron microscope with energy dispersive X-ray analysis(SEM/EDXA). Also, the samples were counted by phase contrast microscope(PCM) in order to compare the results with the permissible exposure standard for workplace. Results indicate that the characterisitcs of fibers found in the roofing sheet, the ceiling and the wall insulation boards were identical to those of asbestos, while the characteristics of fibers found in the ceiling insulation board, the floor tile and the sprayed on insulation products in parking area were identical to those of asbestos, while the characteristics of fibers found in the ceiling insulation board, the floor tile and the sprayed on insulation products in parking area were identical to those of rock wool. The concentrations of airborne fibers from various building materials cut by a grinder for 5 minutes were in the ranges of 0.09 $\sim$ 1.71 fibers/cc(f/cc). The highest concentration(1.71f/cc) was found during grinding the wall insulation board which also contains rock wool. The airborne fiber concentrations generated by installing at workplace were ranged from 0.0009 to 0.029 f/cc. All asbestos fibers from the ceiling insulation board at workplace were less than 20$\mu$m in length and more than 20% of them had the average aspect ratio greater than 20. Therefore, for the purpose of decreasing asbestos and man-made fiber concentrations at the workplace, the ceiling and wall board should use strong binding material to increase the binding force with fiber. Also, the permissible exposure standard for workplace(2.0f/cc) in Korea should be constituted below the maximum avaiable concentration measured at glove box.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2004년도 춘계학술발표회
• /
• pp.121-125
• /
• 2004

본 연구에서는 비선형 유한요소법을 적용하여 면내압축방향의 하중이 작용하는 경우, 유공판에 대하여 유공의 크기를 변화시켜가며, 최종강도 시리즌 해석을 수행하고 설계식을 도출하였다. 연속판 조건을 고려하여 모델링 범위를 결정하였으며, 주변 경계조건의 영향을 충분히 고려하기 위하여 주변 보강재를 포함하여 실제의 선박구조를 선정하였다. 또한, 보강재의 크기 및 형상의 영향을 조사하기 위하여 보강재 치수 및 종류를 변수로 한 시리즈 해석을 수행하고, 개발된 설계식의 적용성을 검토하였다.

• 한국산학기술학회논문지
• /
• 제10권1호
• /
• pp.39-45
• /
• 2009

디스플레이 장치에서 기존의 CRT는 곡면이며 무겁고 큰 부피 때문에 LCD, PDP와 같은 평판디스플레이(FPD)로 대체되고 있다. FPD는 $0.6{\sim}0.8mm$ 두께의 대면적 글래스에 여러 공정을 거친 후에 최종 제품 규격으로 절단하여 제작하기 때문에 글래스의 면적이 크면 클수록 FPD의 생산성이 높다는 밀접한 관계를 갖는다. 따라서 FPD 제조 업계에서는 글래스 면적을 증가시키기 위하여 노력하고 있다. 7세대 글라스($2,220mm\;{\times}\;1,870mm\;{\times}\;0.7mm$)를 대상으로 유한요소해석 및 유동해석을 통하여 이송장치, 배급장치, 수평/경사 변환장치 및 제어장치로 구성된 비접촉 공기부상 이송시스템을 개발하였다. 본 개발에서 확보한 설계기술을 통하여 글라스의 크기가 대형화 되더라도 관련 이송장비를 보다 쉽게 제작하여 적용할 수 있다.