• 한국초지조사료학회지
• /
• 제11권1호
• /
• pp.6-11
• /
• 1991

Perennial ryegrass 유식물체의 가을철 생육과 1변초의 개처중 및 수량구성요소와의 관계를 검토하여 월동성을 나타낼 수 있는 형질을 션발하고 품종을 분류하고자 하였다. 1. 1 번초의 척체중은 유식물체의 개체당 경수와 유의힌 정상관을, 초세와는 유의한 부의 상관을 나타내었다. 2. 1번초의 개체중은 출수경중, 개체당경수, 영양경수, 출수경수, 1 경중 및 출수율과 유의한 정상관이 인정되었다. 3 .상대경수출현솔이 낮은 품종은 가을철에 분얼의 발생이 많으며 상대경수출현율이 높은품종은 봄철에 분얼의 발생이 많은 특성을 나다내었다. 4 .상대경수출현율당 개체중은 1번초의 개체중, 초장, 출수정중, 개체당 경수, 출수경수, 1 경중 및 출수율과 유의한 정상관을 나타내었다. 5 .상대경수출현율당 개체중에 의하여 2품종군으로 분류되었다 즉, 상대경수출현율당 개체중이 1.0 이 상의 품종에는 7 개 품종이, 1. 0 미만의 품종에는 9 개품종이 포함되었다. 6 상대경수출현율당 개체중에 의하여 분류된 품 종군에서는 수량구성요소의 차이가 인정되었다.7 .상대경수출현율당 개체중은 월동성을 나타내는 유효한 형질이라고 생각되었다.

• 한국초지조사료학회지
• /
• 제18권3호
• /
• pp.179-186
• /
• 1998

이용율을 높이고 부존식물을 이용 조관료 생산 기반 구축에 필요한 기초 자료를 얻고자 바다새의 생육특성, 사초수량 및 사료가치를 조사하였던 바 그 결과를 요약하면 다음과 같다. 1. 바다새의 생육은 출온기에 거의 완료되어 초장, 엽장, 엽폭, 경직경, 분얼수, 개체당 생체중 및 건물 중은 각각 137.5cm, 42.6cm, 4.65mm, 2.48mm, 15.3개, 4 44.6g 및 15.3g 이었다. 2. 생초수량은 출수기에 가장 많아 4,460kg/10a이었으며 건물수량은 출수기에 1,530kg/10a 이었던 것이 출수후에도 계속 증가하여 출수후 20일에는 1,630kg/10a이었다. 또한 5cm와 10cm의 예취높이 수준간 생초수량은 예취시기에 따라 유의성은 인정되었지만 총생초수량에서는 유의성이 없었다. 그러나 총건물수량에서는 유의성이 있어 10cm 예취높이구가 수량이 더 많았다. 3. 조단백질, 가급태단백질, 가소화단백질 및 TDN 함량은 생육이 진전됨에 따라 감소하여 각각 12.3~3.7%, 12.3~3.70, 10.8-3.6% 및 65.2~60.7% 범위였고, 조단백질, 가급태단백질 및 가소화단백질 수량은 출수기에 TDN 수량은 출수후 20일에 가장 높았다. ADF와 NDF 함량은 생육이 진전됨에 따라 증가하여 각각 출수전 20일에서 출수후 20일 사이에 3 36.4~50.0% 및 62.7~80.5%의 범위였다. 4. P, Ca, K 및 Mg 같은 무기물 함량은 생육이 진전됨에 따라 감소하여 각각 0.31~0.20%, 0.70~0.52%, 1.74~1.28% 및 0.19~0.18% 범위 이었으나 P, Ca 및 K의 수량은 출수기에 Mg 수량은 出수후 20일에 가장 많았다. 5. ENE, NEL, NEM 및 NEG 같은 정미에너지 함량도 생육이 진전됨에 따라 감소하여 각각 1.42~1.29, 0 0.68~0.62, 0.68~0.61 및 0.40~0.35Mcal/lb 범위 이었으며 이들 정미에너지 수량은 출수후에도 계속 증가하여 출수후 20일에 가장 높았다. 6. 바다새의 채식율은 출수전은 96.6% 출수후는 95.3%으로 나타나 대체로 기호성이 높았다.

• 한국전산구조공학회논문집
• /
• 제18권1호
• /
• pp.13-20
• /
• 2005

최근 강구조물과 해양구조물에 있어서 박판 부재인 고장력강이 널리 사용되면서 좌굴이 발생할 가능성이 커지고 있다. 특히 선박구조는 상자형 박판 구조물로서 용접이나 절단등의 열 가공에 의하여 필연적으로 판부재에 초기처짐이 발생하게 된다. 이러한 초기처짐은 박판부재가 좌굴을 동반한 복잡한 비선형 거동을 나타낼 때 악영향을 미치는 요소이다. 결과적으로 선체구조물이나 해양구조물에 안정성과 정확성을 부여하기 위해서는 발생 가능한 초기처짐을 이상화하여 2차좌굴 거동을 고려한 붕괴 매커니즘을 초기구조설계에 반영하여야 한다. 본 연구에서는 종방향 압축하중이 작용하고 네변 단순지지조건인 판에 실제 계측된 여러 가지 초기처짐형상을 적용한 유한요소 해석을 하였다. 해석방법으로서는 범용 유한요소프로그램인 ANSYS의 탄소성대변형 유한요소법을 적용하였고 해석제어는 Newton-Raphson method와 Arc-length method를 병용하였다.

• 한국의류학회지
• /
• 제19권6호
• /
• pp.1008-1016
• /
• 1995

The purpose of this study is to examine the vest patterns with better fitness, function and beauty best suited to the bodies because the previous studies on the vest pattern are not enough to be usable for its making and wearing including the emperiment and practice as well as its direct design and cutting although its wearing range has been widely popular. This study was carried out by making the experimental vest and performing its wearing experiment. The result of this study is summarized as follows. 1. The sensory evaluation on apperance showed that the wholoe average of pattern 4 was the highest for all S, M, L bodies. In addition, it was shown by the bodies that the most suitable related patterns included pattern 4-M body, pattern 2-S body and pattern 4-L body. However, the L body indicated the lowest score in all patterns. Then, this fact means that the diversified studies must be carried out on the vest patterns for the bodies. 2. The results on the function of vertical motions indicated that when the motion angle increased the lifting volume of the vertical motion also increased proportionally, and that the motion at $135^{\circ}$ among these verical motions showed the highest score. Therefore, it is required to consider this fact when determining the vest length in the process of making the vest pattern. 3. The results on the twisted degree of a posture showed that as to the experimental results on these vertical motions the twisted degree increased with the increase of angle. This fact seems to be also important in deforming the vest length when making the vest.

• 한국의류학회지
• /
• 제31권5호
• /
• pp.692-704
• /
• 2007

Recently, Basic patterns with excellent body fitness and automation availability are required to be developed in order to automate the patterns of women's clothes. In this study, this reference points, reference lines and segments were fixed onto 3D scan data for the lower body the women in their twenties, they were directly spread out to be 2D flat pattern to facilitate development into the design of slacks adhered closely to the human body such as special and highly-functional clothes, and then slacks 2D pattern was developed for the purpose of seeking scientific approach to the development into basic form slacks and 3d emotional pattern. For conversion of 3D pattern into 2D flat pattern, reference points and segments were created by using Rapid Form of 3D shape analysis software, and triangle mesh of the body surface of the created shape was developed with Auto CAD 2005. The correspondence between slacks and human body was examined by the fixation of major reference lines. Specially, the wearing characteristics of slacks were considered by the fixation of side lines in consideration of posture. As a result of using the way of development to constantly maintain the length while 3D triangle mesh is converted into 2D flat mesh, the shape was shown to be excellently reproduced, and the area of flat pattern was increased compared to the shape of parting plane. Also, the sunk-in curve like the brief line of front crotch length needed a cutting line when it was closely adhered, when mesh was overlapped, and the pattern area was smaller compared to the actual shape.

• 한국의류산업학회지
• /
• 제11권6호
• /
• pp.925-933
• /
• 2009

This research was carried out by analyzing a form and composition in baseball cap targeting 97 marketing products, and we have typified it by frequency analysis. We have carried out comparing and wearing test between comparative pattern and the most preferred three products of sports brand, fashion brand A, and fashion brand B (flex fit). And also, in order to provide basic indices for developing new pattern, we have carried out analysis of variance. 1. As a result of analyzing a form in baseball cap, the most general pattern type for crown is central cutting with six pieces. In a cap, a basic type with no decoration was the most general. In the size adjustment and decoration, belt type and embroidery type (front or side embroidery of the crown) was the most common, respectively. 2. As a result of comparing and analyzing six-piece typed crown pattern, the comparative pattern was the same and symmetric in size and form of three patterns in front, side, and back. However, the patterns of marketing products of three brands were different in size and form of three patterns in front, side, and back. The patterns of sports brand were the largest in crown height and width, thus it was good at providing activity and motion. The patterns of fashion brand A were the shortest in the crown length and well-curved in front pattern, so it was well-matched with head shape. The patterns of fashion brand B were well-described back side of head since its convex and long patterns in the back head. 3. As a result of wearing test by five-point Likert scale among brand, pattern of fashion brand B outperformed the others since it was well-matched with head shape. In the cap, pattern of fashion brand A is the most preferred which was 7.5 cm of length and 18cm of width.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2004년도 춘계학술대회 논문집
• /
• pp.83-88
• /
• 2004

최근 강구조물과 해양구조물에 있어서 박판 부재인 고장력강이 널리 사용되면서 좌굴이 발생할 가능성이 커지고 있다. 특히 선박구조는 상자형 박판 구조물로서 용접이나 절단등의 열 가공에 의하여 필연적으로 판부재에 초기처짐이 발생하게 된다. 이러한 초기처짐은 박판부재가 좌굴을 동반한 복잡한 비선형 거동을 나타낼 때 악영향을 미치는 요소이다. 결과적으로 선체구조물이나 해양구조물에 안정성과 정확성을 부여하기 위해서는 발생 가능한 초기처짐을 이상화 하여 2차좌굴을 고려한 초기구조설계에 반영하여야 한다. 본 연구에서는 종방향 압축하중이 작용하고 네변 단순지지조건인 판에 실제 계측된 여러 가지 초기처짐형상을 적용한 유한요소 시리즈 해석을 하였다. 해석방법으로서는 범용유한요소프로그램인 ANSYS의 탄소성대변형 유한요소법을 적용하였고 해석제어는 Newton-Raphson method와 An-length method를 병용하였다.

• The Plant Pathology Journal
• /
• 제23권3호
• /
• pp.223-225
• /
• 2007

Many plant growth-promoting rhizobacteria (PGPRs) have been known for beneficial effects on plants including biological control of soilborne pathogens, induced systemic resistance to plant pathogens, phytohormone production, and improvement of nutrient and water uptake of plants. We developed a simple and rapid method for screening potential PGPR, especially phytohormone producing rhizobacteria, or for analyzing their functions in plant growth using cucumber seedling cuttings. Surface-sterilized cucumber seeds were grown in a plastic pot containing steamed vermiculite. After 7 days of cultivation, the upper part 2 cm in length of cucumber seedling, was cut and used as cucumber cuttings. The base of cutting stem was then dipped in a microcentrifuge tube containing 1.5ml of a bacterial suspension and incubated at $25^{\circ}C$ with a fluorescent light for 10 days. Number and length of developed adventitious roots from cucumber cuttings were examined. The seedling cuttings showed various responses to the isolates tested. Some isolates resulted in withering at the day of examination or in reduced number of roots developed. Several isolates stimulated initial development of adventitious roots showing more adventitious root hair number than that of untreated cuttings, while some isolate had more adventitious root hair number and longer adventitious roots than that of untreated control. Similar results were obtained from the trial with rose cuttings. Our results suggest that this bioassay method may provide a useful way for differentiating PGPR's functions involved in the development of root system.

• 한국잠사곤충학회지
• /
• 제44권1호
• /
• pp.9-12
• /
• 2002

한반도에 자생하는 돌뽕나무(Morus tiliaefolia)의 임성과 재배학적 특성은 다음과 같다. 1. 종자형성률은 46∼80%이며 종자의 발아율은 19∼28%에 불과하다 2. 개화최성기(1994년)는 4월 28일∼5월 3일로서 산뽕나무보다는 늦고 개량뽕보다 빠르다 3. 춘기 동아의 탈포기는 4월 21일∼24일로서 산뽕나무와 개량뽕보다 늦다. 4. 잎은 대형으로 엽형지수 1.05의 폭광성을 나타내며 잎두께는 산뽕나무보다 두껍다. 5.성숙엽의 화학성분은 가용성 무질소물과 조회분이 많고 조단백질, 조지방, 조섬유가 적다. 6. 낮추베기때의 자세는 대부분 전개성이며 가지는 조장형이고 절간장이 길다 7. 추위견딜성과 뽕나무 동고병에 약하다.

• 한국생활과학회지
• /
• 제18권3호
• /
• pp.793-798
• /
• 2009

Hair cut is one of the best useful technical tool for hair styling. In this study using the rule of the layers of hair design, balanced for visual art, perceptual ability and form created by the principles of analysis and offer hair cuts and hair design of the representation of regions and even hair design as the basis of a student of Hair Beauty and all the people working in the field can create a variety of hair design puts the purpose to establish a basis. The result of this study can be outline as follows: First, the step line and the movement of the relationship between the law of the layers above and below the length of the same layer techniques, the same consists of a vertical cross-section of the overall round shape of the cut same layer is created and the appropriate volume and movement, the movement of low-layer round a little bit more feeling and expression is used when you want. High-layer used to want to move a lot of light and could see that. Second, the layer of the Law and over direction, lifting, section, the line control. weight control and analyzed by principle and the principle of the process of forming the written form was unknown. Third, hair design, the expansion of the expressive power of the law of the layers, and the section of the over direction depends on the presence of line control to express the length of the outline I had to, lifting the weight to adjust form controls, and the expression of Hair Design will be expanding the width. A hair designer, a layer style to create a zone he thought the law of the first layer formative area To further the reach will be a lot of research, leading up formative aspects of this research thesis do not have missing parts, or as a result of the Beauty of Hair Design and the width of a hair design education in the field can perform to help feed the reference materials that will be.