• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.9
• /
• pp.799-804
• /
• 2016

Broadband powerline communication (BPLC) uses distribution lines as a medium for achieving effective bidirectional data communication along with electric current flow. As the material characteristics of power lines are not good at the communication channel, the development of power line communication (PLC) systems for internet, voice, and data services requires measurement-based models of the transfer characteristics of the network suitable for performance analysis by simulation. In this paper, an analytic model describing a complex transfer function is presented to obtain the attenuation and path parameters for a multipath power line model. The calculated results demonstrated frequency-selective fading in multipath channels and signal attenuation with frequency, and were in good agreement with the experimental results. Inductive coupling units are used as couplers for coupling the signal to the power line to avoid physical connections to the distribution line. The inductance of the ferrite core, which depends on the frequency, determines the cut-off frequency of the inductive coupler. Coupling loss can be minimized by increasing the number of windings around the coupler. Coupling efficiency was improved by more than 6 dB with three windings compared to the results obtained with one winding.

• Journal of Broadcast Engineering
• /
• v.9 no.4 s.25
• /
• pp.424-433
• /
• 2004

Jing(gong) is one of the most well known Korean traditional Samulnori instruments to the general public. Samulnori is consisted of four instruments, them being : the jingo the janggu (hour-glass drum). the kkwaenggwari, and the buk(drum). Of the four instruments, the jing with its deep, and yet soft and beautiful long lingering sound embraces the sounds of the other three. The jing is a brassware instrument, a compound of $70{\%}\;copper\;and\;22{\%}\;tin.$\;A high quality brassware is used when the jing is made. The jing is shaped with a 39-40cm circular plate and a rim that gives 7.0-7.5cm of depth to the instrument. Even with its most simple structure, when the circular plate is hit during performance, the rim which supports the circular plate gives resonance to the sound making low-frequency sounds. Therefore the range of the representative frequency of the full rim jing is between $118.4{\~}366.0[Hz],$\;the lingering sound lasts for more than 20 seconds afterwards. When the jing with half of its rim cut off is hit the basic frequency is $139.9{\~}387.5[Hz].$\;And the sound lasted for ten more seconds. The jing of its rimless frequencies are distributed between $990.5{\~}1,372[Hz].$\;And the lingering sound lasts for 5seconds afterwards. Therefore, different thickness and depth of the rim may give new resonance frequencies and alter the longing time of the sound. This thesis paper will try to reveal the relationship between the thickness or depth of the rim (which holds the bending circular plate) and the frequency or the lasting time of the sound.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.8
• /
• pp.47-54
• /
• 2012

In this paper, we have fabricated the Schottky diode for THz applications by heterogeneous resist patterning method. The Schottky diode was developed using electron beam lithography and photolithography to connect the anode and the anode pad for a simple process. The measured performance of developed Schottky diode are $11.2{\Omega}$ of series resistance, 25.96 fF of junction capacitance, 1.25 of ideality factor and 547.6 GHz of cut-off frequency.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.18 no.3
• /
• pp.232-239
• /
• 2013

This paper proposes an improved stator flux estimator through ensuring conventional PLPF to act as a pure integrator for sensorless control of induction motors. Conventional PLPF uses the estimated synchronous speed as a cut-off frequency and has the gain and phase compensators. The gain and phase compensators are determined on the assumption that the estimated synchronous angular speed is coincident with the real speed. Therefore, if the synchronous angular speed is not same as the real speed, the gain and phase compensation will not be appropriate. To overcome the problem of conventional PLPF, this paper analyzes the relationship between the synchronous speed error and the phase lag error of the stator flux. Based on the analysis, this paper proposes the synchronous speed error compensation scheme. To achieve a start-up without speed sensor, the current model is used as the stator flux estimator at the standstill. When the motor starts up, the current model should be switched into the voltage model. So a stable transition between the voltage model and the current model is required. This paper proposes the simple transition method which determines the initial values of the voltage model and the current model at the transition moment. The validity of the proposed schemes is proved through the simulation results and the experimental results.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.1
• /
• pp.173-178
• /
• 2020

A multi-ray model has been used to interpret radio transmission losses in half-canyon structures with slope and to formulate a multi-ray propagation model depending on the angle of slopes. The cut-off angles for the third and fourth paths, which are the slope-sided reflection paths of the transmission and reception radio waves determined by the inclined angles of the slope, were calculated with the height and location of the transmitter and receiver. To predict transmission losses in an inclined plane environment, the embankment environment where the actual slope exists was modeled and simulated to calculate the loss of propagation transmission, and the radio wave transmission loss was confirmed by the measurement for the frequency band 1 to 6 GHz. Simulation results and measurement results showed similar trends in radio transmission loss, and radio transmission loss predictions and measurement results for various terrain information can be used in the design of radio propagation service.

• Journal of the Korean Dietetic Association
• /
• v.23 no.2
• /
• pp.155-179
• /
• 2017

The purpose of this study was to compare the task elements categorized into required and additional man power's implemental between present and future-oriented duties of school nutrition teachers. The survey consisted of five duties, 27 tasks, 93 task elements, and 270 work details in the task elements of school nutrition teachers. A pilot-test was first conducted on nutrition teachers to confirm the survey contents, and then a main survey was performed on 240 school nutrition teachers, using a self-administrated online method, from July 16 to September 5, 2016. To compare present and future-oriented tasks, frequency analyses were conducted. Work details in the task elements were categorized into 'required' and 'additional man power's implemental', depending on school nutrition teachers' responses, based on a 50% cut-off percentage. The results showed that 13 work details among 60 work details (21.7%) in the 'Duty C. Safety and hygiene management of school foodservice', and 15 work details out of 106 work details (14.2%) in 'Duty B. Foodservice management practices' were identified as additional man power's implemental in future oriented duties. As to 'Duty A. Nutrition management', only three work details among 55 work details (5.5%) were identified as additional man power's implemental. On the other hand, all work details in 'Duty D. Nutrition diet education and counseling and 'Duty E. Reinforce professionalism' were identified as "required" as school nutrition teachers' duties. These findings imply that school nutrition teachers perceive nutrition management and education as their primary duties to the fulfill school foodservice' mission of promoting students' health and fostering students' dietary behaviors. The study offers practical and governmental implications, which can encourage school nutrition teachers to perform their primary duties.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.11
• /
• pp.5557-5562
• /
• 2012

Aim: The aim of this study was to investigate the frequency and correlation between auto-antibodies to survivin and MUC1 variable number tandem repeats (VNTR) in colorectal cancer (CRC), which can provide valuable information for the design of immunotherapeutic vaccines for this disease. Methods: Enzyme-linked immunosorbent assays (ELISA) were used to examine the level of auto-antibodies against survivin and MUC1 VNTR in the serum of 135 CRC patients and 95 healthy volunteers. Results: Using mean absorbance + 2 standard deviations (SD) of the healthy samples as a cut-off value, the positive rates of survivin and MUC1 VNTR auto-antibodies in CRC were 31.1% and 18.5%, respectively. Altogether, the survivin and MUC1 VNTR positive samples accounted for 36.3% of the CRC patients, and 7.4% were positive for both. Conclusion: A significant positive correlation was found between levels of specific antibodies against survivin and MUC1 VNTR in the serum of CRC patients (r = 0.3652, P < 0.0001), suggesting that vaccines against both targets would elicit immune responses more effectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.7
• /
• pp.1237-1242
• /
• 2016

In this paper, the low pass filter with harmonics suppression and rejection using parallel coupled-line and radial type open stub is presented. And the resultant characteristic of the proposed low pass filter is that the harmonics are suppressed and rejected in wide bandwidth due to the parallel coupled-line structure. The open stub of a low pass filter is constructed in radial type which can be used to adjust the size of filter. The size of the proposed low pass filter is $6.98{\times}7.60mm2$ and the cut off frequency is 2.45 GHz. And the filter is economical in unit cost and can be constructed easily and has the merit of mass product because the filter is composed of distributed element. Also, the widely rejected harmonics is 128 % in the bandwidth and the insertion and return losses of the low pass filter are 1.07 dB and 19.5 dB, respectively.

• Clinical and Experimental Pediatrics
• /
• v.46 no.2
• /
• pp.192-194
• /
• 2003

A neonate born at 38 gestational weeks was admitted due to generalized tonic-clonic seizure and cyanosis. The neonate was born six days previously at home through normal delivery and the umbilical cord was cut using scissors sterilized in boiling water. The neonate weighed 3,180 g at admission. Physical examination revealed cyanosis, opisthotonus, trismus and reactive muscle spasms. Laboratory exam, brain sonogram and EEG showed no significant abnormal findings. Based on her history and physical examination, the neonate was diagnosed with tetanus and put in an incubator isolated in a quiet, dark room. Treatment with tetanus human immunoglobulin along with antibiotics (penicillin G) were started immediately, and mechanical ventilation, administration of neuromuscular blocking agent and muscle relaxant were also started off. The frequency of seizure episode decreased gradually, and on the 32nd hospital day, mechanical ventilatory support was stopped along with extubation two days later. Thereafter, the neonate was in continuous generalized hypertonic state and showed feeding difficulty, but there was gradual improvement. She was dismissed on the 49th hospital day and is currently under OPD follow-up, doing well with no special problems. Respiratory management is critical to neonatal tetanus. We report here a case of tetanus treated with inhibition of self-respiration, neuromuscular blocker and application of ventilator, and present this method as a useful direction for future treatment of neonatal tetanus.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.1
• /
• pp.7-13
• /
• 2006

Linear compressors with a free piston driven by a linear motor are widely attention in the cooling apparatus such as refrigerator due to the high efficiency The stroke of piston in the linear compressor driven by LPMSM (Linear Permanent-Magnet Synchronous Motor) can be obtained from Integrating the input voltage and current of LPMSM, but it may be diverged due to dc components in the voltage and current. The strategy to prevent the divergence of stroke using both the high-pass filter and do offset compensation was suggested. The equations for the magnitude and phase of the stroke and also dc offset including the stroke are derived as a function of the cut-off frequency of HPF. The accurate stroke of a piston can be calculated by compensating for dc offset. The performance of the newly developed stroke calculation scheme has been verified by experimentally on a linear compressor drive system, where the control was implemented by a 16-bit DSP.