• 한국정밀공학회지
• /
• 제26권2호
• /
• pp.118-125
• /
• 2009

This paper reports the size classification of nanoparticles as well as electrical tuning techniques for the cut-off diameter and collection efficiency. Classifying particles < 100 nm in diameter is quite a technical challenge using a virtual impactor with the cut-off diameter being determined geometrically. However, the proposed virtual impactor can classify particles <100 nm and tune the cut-off diameter by electrically accelerating the particles. The cut-off diameter of the proposed device was tuned from 15 to 50nm.

• 대한기계학회논문집B
• /
• 제26권10호
• /
• pp.1341-1347
• /
• 2002

In order to improve efficiency of a system with three-dimensional flow characteristics, this paper presents a new method that overcomes three-dimensional effects by using two-dimensional CFD and neural network. The method was applied to shape optimization of cut-off in a multi-blade fan/scroll system. As the entrance conditions of two-dimensional CFD, the experimental values at the positions out of the inactive zone were used. The distributions of velocity and pressure obtained by two-dimensional CFD were compared with those of three-dimensional CFD and experimental results. It was found that the distributions of velocity and pressure have qualitative similarity. The results of two-dimensional CFD were used for teaming as target values of neural network. The optimal angle and radius of cut-off were determined as 71$^{\circ}$and 0.092 times the outer diameter of impeller, respectively. It is quantified in the previous report that the optimal angle and radius of cut-off are approximately 72$^{\circ}$and 0.08 times the outer diameter of impeller, respectively.

• 한국자동차공학회논문집
• /
• 제11권1호
• /
• pp.225-231
• /
• 2003

In order to improve efficiency of a system with three-dimensional flow characteristics, this paper presents a new method that overcomes three-dimensional effects by using two-dimensional CFD and response surface method. The method was applied to shape optimization of cut-off in a multi-blade fan/scroll system. As the entrance conditions of two-dimensional CFD, the experimental values at the positions out of the inactive zone were used. In order to examine the validity of the two-dimensional CFD the distributions of velocity and pressure obtained by two-dimensional CFD were compared with those of three-dimensional CFD and experimental results. It was found that the distributions of velocity and pressure show qualitatively similarity. The results of two-dimensional CFD were used for constructing the objective function with design variables using response surface method. The optimal angle and radius of cut-off were determined as $72.4^{\circ}$ and 0.092 times the outer diameter of impeller, respectively. It is quantified the previous report that the optimal angle and radius of cut-off are approximately $72^{\circ}$ and 0.08 times the outer diameter of impeller, respectively.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.365-370
• /
• 2001

In order to minimize unstable flow occurred at a multiblade fan/scroll system, optimal angle and shape of cut-off was determined by using two-dimensional turbulent fluid field analyses and neural network. The results of CFD analyses were used for learning as data of input and output of neural network. After learning neural network optimization process was accomplished for design variables, the angle and the shape of cut-off, in the design domain. As a result of optimization, the optimal angle and shape were obtained as 71 and 0.092 times the outer diameter of impeller, respectively, which are very similar values to previous studies. Finally, it was verified that the fluid field is very stable for optimal angle and shape of cut-off by two-dimensional CFD analysis.

• 대한전자공학회논문지
• /
• 제23권2호
• /
• pp.264-268
• /
• 1986

A thchnique has been studied for the measurement of the spectral loss and the cut-off wave length, at which the first high-order mode disappears. The near-field patterns of a fiber which is excited by a variable wavelength source are used for the measurement of cut-off wavelength. Because of the absorptive phenomenon of OH- molecular vibration, spectral loss of a single mode optical fiber sample is 5.6dB/km at 1380 nm wavelength and 1dB/km at 1240 nm wavelength. From the near field intensity patterns and the mode field diameter graph for the half power width, the cut-off wavelength of the fiber is measured to be 1120 nm.

• 한국생산제조학회지
• /
• 제9권5호
• /
• pp.87-95
• /
• 2000

The numerical analysis and the experiments are carried out to develop the design program for the flow control valve attached to the vane pump for power steering. The factors affecting the flow rate characteristics are analyzed by the experiments and the numerical analysis. The results are summarized as follows; (1) the main factors affecting to the first and second control flow rate are the diameter of big and small rod of the spool. (2) the cut off is mainly affected by the main spring constant, the initial displacement of main spring and the small diameter of the spool. (3) the dropping slope characteristics are decided by the chamfer of spool and the dynamic characteristics of the spool.

• Journal of Korean Society for Atmospheric Environment
• /
• 제17권E1호
• /
• pp.9-16
• /
• 2001

To evaluate the correct separation capacity of cascade impactor for liquid aerosol, theoretical and experimental calculations of 50% cut-off diameter(ECOD(sub)50) were performed. A recalculation method of original diameter for hemispheric liquid aerosol collected on casecad impactor is also proposed newly using fixation technique. Calculated values for theoretical (ECOD(sub)50) of 40stage cascade impactor are 20, 6.4, 2.8, and 1.4$\mu\textrm{m}$ at 1st- ,2nd-, 3rd- and 4th-stage, respectively. A good agreement between the result of theoretical (ECOD(sub)50) and that og experimental ones was obtained at Stage 2 and 3. On the other hand, relatively large differences were found at Stage 1 and 4. Fixation for liquid aerosols using ${\alpha}$-cyanoacrylate monomer was performed successfully. The orignal diameter of liquid aerosols collected on each stage was calculated. The maximum levels of number size distribution curves at each stage are 19.8, 6.5, 3.1 and 1.5 $\mu\textrm{m}$ at 1st-, 2nd-, 3rd- and 4th-stage, respectively. The distortion of separation capacity of cascade impactor due to the split, merger, disappearance, and evaporation of liquid aerosols in the fluid did not occur.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권5호
• /
• pp.82-90
• /
• 2018

원자력 발전소에는 No.36(D36)이상의 대구경 철근이 사용되는데 이러한 대구경 철근으로 갈고리 정착을 할 경우, 기준에서 요구하는 구부림 및 갈고리 길이로 인해 설계 및 배근에 있어 큰 어려움을 겪을 수 있다. 이러한 문제를 해결하기 위한 방안으로 확대머리 철근을 사용할 수 있다. 2008년 개정된 ACI 318에서는 확대머리철근의 정착길이식을 도입하였으며, 제정 배경 연구를 근거로 하여 횡보강근의 영향력을 무시하고 있다. 그러나 확대머리 철근이 겹침이음이나 컷오프 구간에서 사용될 경우, 인장재에 의해 피복 콘크리트를 밀어내는 힘이 발생하여 횡보강근에 작용하는 인장력이 크게 증가한다. 본 연구의 목적은 휨을 받는 부재 내에 정착된 확대머리 철근의 정착성능에 대한 횡보강근의 영향력을 평가하는 것으로, 이를 위해 횡보강근의 간격을 변수로 한 대구경 확대머리 철근의 정착실험을 수행하였다. 실험방법으로는 컷오프 구간을 모사한 실험을 수행하였으며, 확대머리 철근으로는 D43의 대구경 철근을 사용하였다. 실험 결과, 횡보강근이 없는 실험체의 경우 정착구간의 쪼갬파괴에 이어 단부의 하중이 확대머리 부근의 콘크리트에 직접적으로 작용하면서 상부 피복 콘크리트가 부재에서 탈락하는 취성적인 파괴형태가 나타났다. 또한 확대머리 철근의 발현강도가 항복강도의 절반밖에 못 미치는 매우 낮은 내력을 보였다. 이에 반해 횡보강근이 배근된 실험체의 경우 경우 횡보강근이 실험체 단부의 하중에 직접적으로 저항함에 따라 실험체 내력이 큰 폭으로 상승하였다.

• 한국잠사곤충학회지
• /
• 제9권
• /
• pp.7-13
• /
• 1969

다간식 정지에 있어서 그 기조의 벌채를 어떻게 하는 것이 뽕의 수량과 정(十)의 상관관계가 있는 총조장과 총조경 및 총조장$\times$총조경들을 증대시킬 수가 있는가를 알기 위하여 시험한 결과를 들면 다음과 같다. (1) 춘벌한 경우에는 전기조 5 cm 균일 벌채구와 태조 10 cm 세조 5 cm 벌채구가 이들이 가장 크다. (2) 하벌한 경우에는 1지간중 상위부분의 기조는 5cm 하잎의 것은 10cm. 벌채구와 태조 l0cm 세조 5cm 벌채구 및 전기조 5cm 균일 벌채구가 가장 크다. (3) 춘벌을 통해서 볼 때에 그 전지 기술이 단순한한 전기조 5cm 균일벌채구가 가장 유리할 것 같다.

• 한국기계가공학회지
• /
• 제19권12호
• /
• pp.42-48
• /
• 2020

Given the increasing interest in air pollution, several technologies to measure black carbon (BC) aerosol particles have been developed. As most BC aerosol particles are smaller than 1 ㎛, it is necessary to pre-separate the particles by size before a BC measuring instrument samples the aerosol particles. In this study, a miniature cyclone separator for portable BC measuring instruments was developed. A numerical approach was used to design the miniature cyclone separator with operating flow rates of 50, 100, or 150 mLPM, and then a prototype cyclone separator was manufactured for experimental validation. The numerical results of the cut-off size and pressure drop of the miniature cyclone separator agreed well with the experimental data. The cut-off sizes of the miniature cyclone separator were determined to be 2.9, 0.94, and 0.63 ㎛ for operating flow rates of 50, 100, and 150 mLPM, respectively. Thus, the miniature cyclone separator is suitable for use as a sampling inlet for the portable black carbon measuring instrument to sample BC aerosol or PM2.5 aerosol.