• 대한영상의학회지
• /
• 제81권1호
• /
• pp.157-165
• /
• 2020

목적 S-Shearwave를 이용하여 유방 병변을 감별하는데 있어 최적의 cut-off 값과 종괴 내 위치를 알아보고 진단적 가치를 평가하고자 한다. 대상과 방법 연구 기간 동안 197명의 여성에서 225개의 유방 병변을 평가하였다. S-Shearwave 값은 초음파 기기에서 자동적으로 생성된 사각형의 region-of-interest로 측정하였다. 병변 내 서로 다른 네 군데에서 각각 세 번 측정하였으며 세 개의 중위 값 중 최대 값을 이용해 각각의 위치에서 최적의 cut-off 값을 계산하였다. 진단적 가치는 area under the receiving operator characteristics curve (이하 AUC)를 통해 평가하였다. 결과 총 225개의 유방 병변 중 156개(69.3%)는 양성, 69개(30.7%)는 악성이었다. 평균 SShearwave 값은 악성 병변이 양성 병변에 비해 유의미하게 높았다(108.0 ± 70.0 kPa vs. 43.4 ± 38.3 kPa, p < 0.001). 하지만 병변 내 위치에 따른 값의 유의미한 차이는 없었다. Cut-off 값을 41.9 kPa로 사용했을 때, 민감도 85.7%, 특이도 63.9%, 정확도 70.7%, 양성예측도 51.7% 및 음성예측도 90.8%였다. 초음파와 S-Shearwave 간의 AUC는 유의미한 차이를 보이지 않았다(p = 0.179). 결론 S-Shearwave는 유방 병변의 감별진단을 하는데 grayscale 초음파에 필적하는 진단적 가치를 가진다.

• 한국멀티미디어학회논문지
• /
• 제20권8호
• /
• pp.1330-1337
• /
• 2017

In off-line phase of the preliminary Cut-off indoor positioning scheme, which is one of the indoor positioning scheme using the fingerprint, relative ranks of peak RSSIs received from beacons at each reference point are stored in the fingerprint map. In some reference points, signals of multiple beacons may be received. In this case, the relative ranks may be different when constructing fingerprint and when receiving signals in real-time. To solve this problem, we propose a method to utilize only up to five beacons with high ranking when constructing a fingerprint and when receiving signals in real-time and comparing them with stored information of a fingerprint. Experiments were conducted on the estimation probabilities and the average error when using this method. Those are compared with the previous methods. Experimental results show that the estimation probabilities and the average error are improved by removing only the remaining five beacons at each reference point of the fingerprint.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(2)
• /
• pp.9-11
• /
• 2000

To increase the device linearities and the breakdown-voltages of FETs, Al$\sub$0.25/ Ga$\sub$0.75/AS / In$\sub$0.25/Ga$\sub$0.75/As / Partially doped channel FET(DCFET) structures are proposed. The metal- insulator -semiconductor (MIS) like structures show the high gate-drain breakdown voltage(-20 V) and high linearities. The devices showed the small ripple of the current cut-off frequency and the power cut-off frequency over the wide bias range.

• Communications for Statistical Applications and Methods
• /
• 제8권3호
• /
• pp.739-751
• /
• 2001

In this paper, a sample design is studied for 2000 forestry management survey of five types forestry , tree felling, gathering of pine mushroom, growing of nut trees, growing of wild flowers, and lumbering industry. We introduce population stratification and a modified stratified cut-off sampling which deal with determination of sample size, sample allocation, and estimation of total and variance of estimator. Substitution of sample units and imputation of nonresponse units are discussed for reducing the nonsampling errors.

• 대한전자공학회논문지
• /
• 제15권3호
• /
• pp.7-10
• /
• 1978

이 논문은 single transistor를 사용하여 정현파를 전파정류하는 한 방법을 검토한다. switching으로 동작되는 inverter에 R-feed back을 하고 최적 parameter를 설정하므로써 도통상태의 반파와 cut-off 상태에서 feed back을 통한 반파를 합성하여 전파정류의 출력을 얻는다. cassette deck의 code재생 system에 이용한 바 효과적이었고, AGC 등에 이용 가능하다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1992년도 춘계학술대회 논문집
• /
• pp.109-114
• /
• 1992

This paper describes an effect of operating condition on surface roughness in wire-cut FDM. The experimental values of surface roughness were measured by the test pieces under the condition of changing. On time, Off time, and Feed rate after fixing other conditions. The material of the test pieces is the alloy tool steel(STD 11) and was used after heat treatment. The results are as follows: 1. The surface roughness became rapidly worse according to the increase of On time and Feed rate. 2. The surface roughness became slowly better according to the increase of Off time.

• 한국산업정보학회:학술대회논문집
• /
• 한국산업정보학회 2004년도 춘계학술대회 21세기 IT산업의 발전 전망
• /
• pp.3-7
• /
• 2004

본 연구에서는 학습기능을 갖는 결정론적 볼츠만 머신에 비단조 뉴런을 이용하여 학습 성능을 수치 시뮬레이션을 통하여 분석한다. 먼저 네트워크의 은닉층에 비단조 및 단조뉴런을 이용한 경우에 대하여 각각 활성화 함수로 시그모이드 함수와 end-cut-off 타입의 비단조함수를 사용한 경우에 대하여 성능을 비교한다. 또한, VHDL을 이용해 설계한 DBM 네트워크에 시그모이드 함수와 end-cut-off 타입의 비단조함수를 사용한 경우에 대하여 시뮬레이션을 통해 수치 시뮬레이션과 성능이 같은지 비교하고 그 유용성을 입증한다.

• 한국식품영양학회지
• /
• 제21권1호
• /
• pp.28-34
• /
• 2008

This study was performed in an effort to standardize the quality of fresh-cut products. Here, consumers' perceptions of fresh-cut products were surveyed to determine the quality factors in preparing quality standards for fresh-cut products. According to the surveys, freshness was the most important factor for consumers when choosing fresh-cut products at the market. Secondary indicators of good quality, i.e., "sensory qualities," were determined to be vibrant color, clean taste, nice feel, neat presentation, etc., as well as knowledge of whether it was organically grown. Off-odors decreased a product's marketability. Likewise, the more wilted or brown it appeared, the less a product was desired. From the results, the quality control indices for fresh-cut products were derived as freshness, discoloration, off-flavor, uniformity, prohibition of adulteration by alien substances, packaging and labeling. The quality of fresh-cut lettuce samples was measured against three storage temperatures: $20^{\circ}C,\;10^{\circ}C$ and $5^{\circ}C$. Sensory quality evaluations revealed the following: produce stored at $20^{\circ}C$ lost its marketability in less than one day; produce stored at $10^{\circ}C$ lost its marketability in less than two days; on the other hand, produced stored at $5^{\circ}C$, maintained its marketability for six days. At these respective points, browning started to occur around cut areas, and increased gradually once it began. Vitamin C content decreased with storage time, but storage at $5^{\circ}C$ maintained vitamin content the longest duration. Finally, further examinations were performed on the sensory qualities of fresh-cut lettuce samples at four levels of increased browning. Up to the third level, the product score for marketability was 5.6.

• 대한한의학회지
• /
• 제39권4호
• /
• pp.51-61
• /
• 2018

Introduction: This study evaluated whether body mass index (BMI) and waist circumference (WC) cut-offs for predicting metabolic syndrome (MetS) were different according to Sasang constitutional type. Methods: Data were obtained from 3,117 South Koreans (20-90 years old), and MetS was defined according to the revised NCEP-ATPIII criteria. Age-adjusted BMI and WC cut-offs were calculated according to Sasang constitutional type (Soyangin [SY], Taeeumin [TE], and Soeumin [SE]), sex, and age (men: ${\geq}40$ vs. <40 years, women: ${\geq}50$ vs. <50 years). Results: The prevalences of MetS were 29.9% (<40-year-old men), 35.1% (${\geq}40$-year-old men), 14.8% (<50-year-old women), and 47.7% (${\geq}50$-year-old women). The BMI ($kg/m^2$) and WC (cm) cut-offs for <40-year-old men were 25.9 and 89.9 (SY), 25.5 and 90.5 (TE), and 21.8 and 86.2 (SE). The cut-offs for ${\geq}40$-year-old men were 23.1 and 88.9 (SY), 25.0 and 89.9 (TE), and 22.2 and 87.5 (SE). The BMI and WC cut-offs for <50-year-old women were 22.5 and 81.2 (SY), 25.1 and 83.0 (TE), and 21.5 and 79.8 (SE). The cut-offs for ${\geq}50$-year-old women were 22.2 and 80.5 (SY), and 25.2 and 89.1 (TE), and 21.9 and 80.3 (SE). Conclusions: The BMI and WC cut-offs for identifying MetS varied according to Sasang constitution type.

• 지질공학
• /
• 제19권4호
• /
• pp.493-499
• /
• 2009

우리나라는 암석자원이 풍부하기 때문에 콘크리트표면 차수벽형 석괴댐(CFRD)의 시공이 증가하고 있는 실정이다. 콘크리트표면 차수벽형 석괴댐에서의 표층부 기초지반인 Bedding Zone 구간은 콘크리트 차수벽을 균등하게 지지할 수 있는 지지력과 콘크리트 차수벽의 누수시 세립토의 유실을 억제할 수 있는 차수성을 유지하여야 한다. 따라서 Bedding Zone 구간의 차수성 확보 여부가 댐의 안정성을 좌우하는 주요 요인이 될 수 있다. 본 연구에서는 기존의 시방서에 제시된 Zone-1 구간의 설계입도분포를 만족하는 시험재료를 선정한 후, 차수성을 평가하기 위하여 실내시험을 실시하였다. 시험 분석 결과 투수계수, 건조단위중량 및 흙의 입도분포에 따른 차수효과의 상관관계를 제시하였다. 특히, 투수계수와 건조단위중량의 상관관계, No. 4체 중량통과백분율과 투수계수 관계가 제시되었고, 또한 시간경과에 따른 투수계수의 변화도 제시되었다.