Kim, Jae Yun;Hong, Jong Won;Han, Koh Woon;Jang, Eu Jean;Pak, Chun Ho
FLOWER RESEARCH JOURNAL
/
v.19
no.4
/
pp.197-201
/
2011
This study was carried out to investigate cut flower quality bulb circumference and cultivars affecting 7 different cultivars to produce high quality cut flower lilies. To determine the effects of bulb circumference on growth and cut flower quality of 7 different cultivars, Lilium oriental hybrid 'Chilli', 'Ismael', 'Medusa', 'Mother's Choice', 'Siberia', 'Sorbonne', and 'Yelloween' were tested. After cut flower quality experiment, the highest 1st flower bud length and cut flower height were 'Medusa' and 'Mother's Choice' respectively. Most plants had over $30^{\circ}$ stem bending angle except for 'Mother's Choice', and 'Ismael'. The study shows that the bigger bulb circumference has the better 1st peduncle diameter, inflorescence length, stem diameter, number of flowers, and fresh weight. Bulb circumference affects the 1st flower bud length, cut flower height and number of flowers. Stem bending angle, however, is affected by neither bulb circumference nor cultivar. In conclusion, growth, cut flower quality and vase life were affected by the bulb circumference rather than cultivar.
This study was conducted to examine the effects of wet storage solution, transport period and temperature on vase life and quality of cut flowers in standard chrysanthemum 'Jinba'. Immediately after transport, the fresh weight and flower diameter of cut flowers did not show a difference according to wet storage solutions regardless of the transport period, but as the transport period increased, the fresh weight and flower diameter increased. The flower bud stage at harvest was maintained due to the small changes in flower diameter, and the freshness of leaves was better when transported at 5℃ than at 25℃. When transported at 25℃, the longer the transport period, the lower the quality of cut flowers as some petals opened up and showed early flowering after transport. In preservative solutions, quality of cut flowers transported at 25℃ was lower than that at 5℃ due to fresh weight and diameter according to the longer transport period. The vase life of cut flowers was 1.0 day, 0.8 day, and 7.3 days longer when transported for 3, 5, and 7 days respectively at 5℃ than at 25℃. The quality of cut flowers was better due to increase in fresh weight and flower diameter, as well as vase life in wet storage solutions of ClO2 and Chrysal OVB than in tap water, regardless of transport period and temperature. There was no difference in fresh weight and vase life between ClO2 and Chrysal OVB, but flower diameter was greater in ClO2 than in Chrysal OVB. Therefore, for long-term transport of cut standard chrysanthemum 'Jinba', wet storage transport in ClO2 at 5℃ was found effective in maintaining the quality and vase life of cut flowers.
The present study was conducted to determine the effects of electron beam irradiation on the postharvest quality of cut flowers. Cut flowers were irradiated with electron beam at 100, 200, 400, 600, 800, 1,000, and 2,000 Gy with a 10 MeV linear electron beam accelerator to evaluate their irradiation tolerance. Postharvest quality was determined by monitoring fresh weight loss, flower longevity, flower diameter, flowering rate, visual quality of flowers and leaves, and chlorophyll content. Cut flowers showed a radiation-induced damage with increasing the irradiation dose. Flower longevity and fresh weight of cut flowers decreased when the irradiation dose was increased. Flower bud opening was also inhibited in a dose-dependent manner. The effective irradiation doses for 10% reduction of postharvest quality (ED10) values were 144.4, 451.6, and 841.2 Gy in the 'Medusa' lily, 'Montezuma' carnation, and 'Rosina White' eustoma, respectively. Although tolerance of cut flowers to electron beam irradiation vary according to species, cultivars, or maturity stage conditions, it is conceivable that 'Montezuma' carnation and 'Rosina White' eustoma could be tolerated and maintained overall postharvest quality up to 400 Gy, the generic irradiation dose approved by the Animal and Plant Health Inspection Service (APHIS) and the International Plant Protection Convention (IPPC) for postharvest phytosanitary treatments.
Journal of Practical Agriculture & Fisheries Research
/
v.24
no.4
/
pp.30-34
/
2022
This study was carried out to analyze the effect of changes in the light environment caused by the daylight disturbance on the productivity and quality of the standard cut flower rose cultivar 'Monet'. It was artificially shaded to obstruct the sunlight and the productivity and growing characteristics of roses according to the time of daylight disturbance were investigated. The number of cut flowers per unit area (3.3m2) of the cut flower rose 'Monet' was 40 stems in the control, while in the 4-hour, 8-hour, and 12-hour treatments, it was 32, 29, and 25, respectively. As the daylight disturbance time was increased, the number of cut flowers showed a tendency to decrease. In the case of cut flower characteristics related to the quality of cut roses, all characteristics such as flower width, flower height, petal length, and petal width, decreased by 10 to 20% in the 12-hour treatment compared to the control. In addition, growth characteristics such as peduncle length, peduncle thickness, and cut flower height, which determine the marketability of cut roses, also tended to decrease as the daylight disturbance time increased. On the other hand, the number of days to flowering increased by 14.0% from 24.3 to 27.7. The overall growth characteristics were contracted and flowering was delayed as the time of daylight disturbance increased. In the results of this study, as the daylight disturbance time increased, flower size, cut flower length, and fresh weight was decreased. This is due to the decrease in the total photosynthetic amount as the daily average photosynthetic photon flux density (PPFD) was decreased, resulting in a decrease in the quality of roses. It is judged that it is because they do not receive enough carbohydrates necessary for growth and development.
This study was carried out to determine the effect of dose and timing of gamma irradiation and post-irradiation treatment with some preservatives of cut flowers on their longevity of rose and chrysanthemum. Cut roses which were soaked in 2% sugar solution persist to 0.75 kGy irradiation treatments. In post-treatments with some preservative solutions, the mixture group of 2% sucrose,2000m silver nitrate and 3.0% crysal were available in flower quality, but the 200 ppm silver nitrate solution treatment showed serious blackening of floral stems and resulted On negative effect in flower quality. Effect of gamma irradiation and all preservative solutions on the cut mum longevity were showed almost same tendency with rose cut flower longevity experiments. The 2% sugar dipping solution in mum cut flower showed the most superior preservative effect compared with the my other preservative solutions tested. Also non-irradiated treatment extended to flower up to complete wilt.
Se Jin Kim;Won Hee Kim;Young Ran Lee;Hyun Hwan Jung
Journal of Bio-Environment Control
/
v.32
no.1
/
pp.15-22
/
2023
Roses are one of the most produced flower species in the world, and cut roses are produced in the greenhouses all year round. Recently, due to the increase in the temperature in the greenhouses in summer, the quality of cut roses is seriously deteriorated, such as shortening the stem length. This study was conducted to investigate the effects of the growing seasons on the qualities of cut roses and also to test the effect of cooling at night in high temperature season on the cut flower qualities of roses. Comparing the qualities and yields of cut roses for each season, the major cut flower qualities such as flower stem length, stem diameter and fresh weight were statistically significantly decreased in roses ('Pink Beauty' and 'Pink Shine') produced in summer. The yields didn't show a statistically significant difference in both cultivars. Investigating the cut flower qualities, the flower stem length increased by 15% for 'Pink Beauty', 11% for 'Ararat', and 12% for 'Pink Shine' when treated with cooling at night in warm season than the untreated control. In addition, when treated with cooling at night in warm season, the fresh weight of all three cultivars increased by 20-30% statistically significantly than conventionally cultivated control. It is expected that cooling at night in warm season will be helpful to improve the cut flower quality deterioration in summer.
Kim, Ju Hyoung;Kim, Si Dong;Lee, Hee Doo;Kim, Tae Jung;Yun, Tae;Paek, Kee Yoeup
FLOWER RESEARCH JOURNAL
/
v.16
no.1
/
pp.57-62
/
2008
The objective of this study was to investigate the effect of triazole compounds [hexaconazole ($50mg{\cdot}L^{-1}$), diniconazole ($50mg{\cdot}L^{-1}$), myclobutanil ($150mg{\cdot}L^{-1}$), difenoconazole ($50mg{\cdot}L^{-1}$), tebuconazole ($500mg{\cdot}L^{-1}$), and bitertanol ($50mg{\cdot}L^{-1}$)] on commercial quality improvement of cut flowers of Dendranthema grandiflorum 'Baegkwang' Plant height, cut flower length and internode length decreased by all triazole compounds. Plant height, cut flower length, internode length and flower neck length were shortened by treatment of $50mg{\cdot}L^{-1}$ diniconazole and $500mg{\cdot}L^{-1}$ tebuconazole. Flower neck was thickened by hexaconazole and myclobutanil. Flower diameter increased with myclobutanil and bitertanol, while it decreased with tebuconazole. Among physiological injury, open center increased with bitertanol treatment. Overall $50mg{\cdot}L^{-1}$ diniconazole and $500mg{\cdot}L^{-1}$ tebuconazole showed a possitive effect on length flower neck and increasing chlorophyll content, while decreasing plant height, cut flower length and diameter of flowers. Thus it is necessary to consider kind, concentration, and treatment times for effective control of cut flower quality.
Nam, Jin Soo;Park, In Sook;Shim, Sung Im;Ryu, Jung A;Lim, Ki Byung
FLOWER RESEARCH JOURNAL
/
v.18
no.2
/
pp.87-92
/
2010
This research was aimed to extend the vase life, improve the cut flower quality and promote flowering rate of bulbous cut Iris 'Blue Magic'. Three different concentrations of 1-MCP ranging from 250 to $750nL{\cdot}L^{-1}$ were treated on cut Iris flowers for the vase life elongation. Several effects of 1-MCP treatment has shown such as early flowering as one day but vase life showed no significant differences comparing to the untreated control. Flowering rate was 75% or more in the treated ones as compare to 64.2% in untreated control. Especially, in a treatment with $250nL{\cdot}L^{-1}$ 1-MCP for 12 hours it showed all flowering. In many post-harvest experiments of cut flowers, ethylene production from flower organ has considered as most critical factor on vase life. Ethylene production from flower organ was measured by gas chromatography (GC) and it showed that there is no direct relation between flower longevity and emission of the ethylene gas in cut Iris. In comparison with the untreated control, ethylene generation rather seems to be increased as 1-MCP treatment increased. There was a synergy effect when 1-MCP and BA applied simultaneously in which flowering and vase life were fastened and also extended, respectively. Therefore, treatment of 1-MCP for cut Iris at flower early harvest is able to improve the flower quality both by diminishing non-flowering rate and by extended flower longevity.
Rose and chrysanthemum are the most popular flowers in Korean floriculture. Sorting flowers is a labor intensive operation in cultivation of the cut flowers and needed to be mechanized. Machine vision is one of the promising solutions for this purpose. This study was carried out to develop hardware and software of a cut flower sorting system using machine vision and to test its performance. Results of this study were summarized as following; 1. Length of the cut flower measured by the machine vision system showed a good correlation with actual length of the flower at a level of the coefficients of determination (R$^2$) of 0.9948 and 0.9993 for rose and chrysanthemum respectively and average measurement errors of the system were about 2% and 1% of the shortest length of the sample flowers. The experimental result showed that the machine vision system could be used successfully to measure length of the cut flowers. 2. Stem diameter of the cut flowers measured by the machine vision system showed a correlation with actual diameter at the coefficients of determination (R$^2$) of 0.8429 and 0.9380 for rose and chrysanthemum respectively and average measurement errors of the system were about 15% and 7.5% of the shortest diameter of the sample flowers which could be a serious source of error in grading operation. It was recommended that the error rate should be considered to set up grading conditions of each class of the cut flowers. 3. Bud maturity of 20 flowers each judged using the machine vision system showed a coincidence with the judgement by inspectors at ranges of 80%∼85% and 85%∼90% for rose and chrysanthemum respectively. Performance of the machine vision system to judge bud maturity could be improved through setting up more precise criteria to judge the maturity with more samples of the flowers. 4. Quality of flower judged by stem curvature using the machine vision system showed a coincidence with the judgement by inspectors at 90% for good and 85% for bad flowers of both rose and chrysanthemum. The levels of coincidence was considered as that the machine vision system used was an acceptable system to judge the quality of flower by stem curvature.
Proceedings of the Korean Society for Agricultural Machinery Conference
/
1996.06c
/
pp.746-754
/
1996
Grading and sorting fresh cut flowers are time consuming process. In Korea, cut flowers are sorted mostly by human inspection due to the lack of adequate machinery. In this paper, quality evaluation factors of cut flowers are discussed, and types of sorting machines existing in the market are introduced . Aspects of computer image processing in evaluation the quality of cut flowers are also discussed.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.