• 대한치과보철학회지
• /
• 제11권1호
• /
• pp.15-21
• /
• 1971

The prime objective of this study was to analyze the positional relationship of the lips to the anterior teeth according to age, sex, and both sides of the dental arch in 381 healthy Korean adults with normal occlusion ranging from 17 to 70 years over old. The results were as follows; 1. In the position of the corner of the mouth to the teeth, the range from center of canine to mesial side of first premolar was revealed the incidence of 81~87%, the distal side of canine was the hiqhest frequency of 39~43%. 2. A straight type (76~79%) of lip line was prevailed against the curved type in rest position. 3. In the exposed type of anterior teeth to upper lip in rest position, type III(50~52%) Grade 2 (26~29%) was revealed the highest frequency of occurences. 4. No significant difference in both sexes and sides of the dental arch was observed. 5. Lip position to the teeth with aging was showed the tendency toward straight type in lip line and toward reduction of the number of exposed type of upper anterior teeth to upper lip, and the corner of the mouth was placed posteriorly.

• Imaging Science in Dentistry
• /
• 제38권1호
• /
• pp.23-27
• /
• 2008

Purpose: The aim of this study was to evaluate the change in the position of the mandibular condyle within articular fossa by a CBCT after wearing complete denture (CD). Materials and Methods: CBCT of 34 temporomandibular joints were taken from 9 male and 8 female patients with CB $Mercuray^{TM}$ (Hitachi, Japan) before and after wearing a CD for rehabilitation. Position of mandibular condyle within articular fossa at centric occlusion was evaluated with $Vimplant2.0^{TM}$ (CyberMed, Korea) on the central parasagittal view and curved panoramic coronal view of the condylar head. A statistical evaluation was done with SPSS. Results: The range of anteroposterior positional rate (AP) of condylar head within articular fossa was -16-5 and -10-12 respectively on the right and left sides. Before wearing CD, the AP rate showed discrepancy between right and left sides (p<0.05). After wearing CD, both condyles showed a tendency to decrease in posterior condylar position (right side; p<0.05). The average discrepancy between right and left side in mediolateral positional rate (MD) was 15.5 and 4.5 respectively before and after wearing CD. The improvement was observed in mediolateral relationship of both condylar heads after wearing CD (p< 0.01). Before wearing CD, the average horizontal angle of long axis of condylar head was $79.6{\pm}2.7^{\circ}\;and\;80.1{\pm}5.7^{\circ}$ respectively on the right and left sides. After wearing CD, both condyles were rotated in the same direction in average on axial plane. Conclusion: We observed with CBCT the significant clinical evidence in case of positional change of mandibular condyle after wearing complete denture.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.340-345
• /
• 2002

Passengers in automobile or train are exposed to a worse noise environment when they are in the tunnel than in the open field. This is due to a relatively higher space density of sound energy by multiple reflection phenomenon of noise generated by operation of transportation vehicles from tunnel wall compared to open field. In this study, noise characteristics of subway train running through a tunnel were investigated at straight/curved track and tunnel type(semi circular/box). Also the noise measured simultaneously at inner and outer sides of train running through a tunnel, so that the coherence of the various noise sources of subway train to inner noise was evaluated.

• Structural Engineering and Mechanics
• /
• 제36권3호
• /
• pp.279-299
• /
• 2010

A methodology on application of the discrete singular convolution (DSC) technique to the free vibration analysis of thin plates with curvilinear quadrilateral platforms is developed. In the proposed approach, irregular physical domain is transformed into a rectangular domain by using geometric coordinate transformation. The DSC procedures are then applied to discretization of the transformed set of governing equations and boundary conditions. For demonstration of the accuracy and convergence of the method, some numerical examples are provided on plates with different geometry such as elliptic, trapezoidal having straight and parabolic sides, sectorial, annular sectorial, and plates with four curved edges. The results obtained by the DSC method are compared with those obtained by other numerical and analytical methods. The method is suitable for the problem considered due to its generality, simplicity, and potential for further development.

• 대한조선학회논문집
• /
• 제48권6호
• /
• pp.528-538
• /
• 2011

As a forming method for curved hull plates more efficient than the flame bending, mechanical bending using multi point press forming and die-less forming is discussed in this paper. the mechanical forming is a flexible manufacturing system for automatically forming of hull parts. It is especially suited to varied curved parts. This paper discusses a multiple point pressing machine composed of a pair of reconfigurable punches in order to achieve the rapid forming of curved hull plates using division forming and presents how forming information is obtained from the given design surface. Although the mechanical forming can be efficient in the metal forming, spring back after pressing is a phenomenon which must be carefully considered when quantifying the process variables. If the spring back is not accurately controlled, the fabricated shell plate cannot meet assembly tolerance. This paper describes the principles to calculate the proper stroke of each punch at the divided areas. the strokes are determined by an iterative process of sequential pressing and spring back compensation from an unfolded flat shape to its given design surface. FEA(finite element analysis) is used to simulate the spring back of the plate and the IDA(iterative displacement adjustment) method adjusts the offset of pressing punches from the deformation results and the design surface. The shape deviations of two surfaces due to spring back are compensated by integrated system using FEA and IDA method. For the practical application, It is aimed to develop an integrated system that can automatically perform the compensation process and calculate strokes of punches of the double sides' reconfigurable multiple-press machine and some experimental results obtained with mechanical bending are presented.

• Physical Therapy Rehabilitation Science
• /
• 제9권4호
• /
• pp.230-237
• /
• 2020

Objective: To investigate the physical appearance and therapeutic changes that occur with the performance of Schroth exercise in patients with scoliosis. Design: Randomized controlled trial. Methods: Fifteen subjects with maximum curvature of the lumbar who were diagnosed with idiopathic scoliosis had volunteered to participate in the study. Eight subjects were included in the experimental group where they performed the Schroth Therapeutic Exercise and the other seven were included in the control group. The experimental group underwent 2 hours of weekly treatment for 12 weeks, while the control group did not during the same period based on the decisions of patients or guardians. The Mann-Whitney rank test was carried out to compare the treatment results of the two groups, and the comparison within the group was done by Wilcoxon signed-rank test. The vertebral rotation angle (VRA) was by Scoliometer, and difference of rotated and curved portion volume (DV) between both sides on the major curvature portion measured by 3D human body scanning system. Results: In the experimental group, 12 weeks of Schroth exercise therapy has significant improved in correction rate (CR) in Cobb's angle (CA), VRA, and DV between both sides on the major curvature portion (p<0.05), while significant differences were not found between the groups regarding weight bearing difference in both feet (WD) and DV (p<0.05). Conclusions: Schroth exercise performance showed significant changes in the patient's therapeutic changes (CA, VRA), but the physical appearance (DV, WD) was not significant, indicating that external changes in the treatment goal setting are more difficult goals to achieve.

• Restorative Dentistry and Endodontics
• /
• 제20권2호
• /
• pp.758-767
• /
• 1995

The purpose of this study was to evaluate canal shaping ability after canal preparation by using engine-driven nickel-titanium file and endosonic file in curved canals. 30 mesiobuccal canals of molars extracted within recent 3 months were divided into 3 groups. Group I and group II were prepared by using engine-driven nickel-titanium Gates-Glidden drill type and the engine-driven nickel-titanium file type. Group III prepared by using en do sonic file. The image of preinstrumented canals was taken by X-ray. The image of postinstrumented canal was taken by X-ray in the same condition of preinstrumentation. A magnified X-ray image on magnifier screen was traced and then compared the preinstrumentated canal image with the postinstrumentated canal image by superimposing method. The following results were obtained : 1. In the change of canal curvature, the engine-driven nickel-titanium Gates-Glidden drill type showed the least change and the ultrasonically filing showed the greatest change. 2. In the percentage of canal enlargement, the engine-driven nickel-titanium file type was greatest at all level(p<0.05), the apex of all group was the greatest, the difference of ultrasonically filing group showed greater between apex and cervix. 3. The percentage of canal enlargement on convex side was greater than that of on concave side in apex of each group(p<0.05). In the ultrasonically filing group, both sides of canal enlargement showed sharply difference(p<0.01). 4. The percentage of canal enlargement on convex side was greater than that of on concave side in the third of cervix of the engine-driven nickel-titanium file type and the ultrasonically filling. The percentage of canal enlargement of convex and concave side in the third of middle of the engine-driven nickel-titanium Gates-Glidden drill type show a similar canal enlargement between convex side and concave side. As above result, the engine-driven nickel-titanium file type was greater in canal enlargement than the other instruments. The engine-driven nickel-titanium Gates-Glidden dirll type was efficient endodontic instrument for curved canal preparation because it was least change in canal curvature.

• 한국의상디자인학회지
• /
• 제5권2호
• /
• pp.75-91
• /
• 2003

This study analyzed descriptions about dots, lines, and sides which are used as a basic elements to express geometric figures as followings: -In the aspect of formative art, dots form images and feelings through their concurrence when make a slight move to coordinates. The concurrence can bring out either positive or negative images; -Lines have unlimited variation as a core measure in body art. They can make optimal effects with different lines such as straight and curved lines of human body; -Sides express not only effects of texture and perspective but also of space and solid by color effects. Expressive characteristics and geometric shapes can be classified by tattoo, henna and body painting: First, colorful tattoos are favored by Caucasian and original tattoos are mostly used by yellow and colored races in the way of scarification to get decorative effects. Recently, a rapid cycle of fashion change in tattoo figures has developed a tentative method of tattooing and a variety of decoration methods. It has made it a lot easier to change a pattern of a tattoo. Tattoos are now popular among people because they no longer have to suffer from pains when they get their body tattooed for a long time. Since tattoos boast their unique beauty which consists of most dynamic and attractive images among the types of body art. It will be one of the most favored make-up methods in the nearest future. Second, geometric designs used in henna include crosses, dots, straight lines, triangles, date palms, and so on. Henna has been particularly loved as an instant decoration by the public since it gradually disappears as time goes on. Third, body painting enables to draw a three-dimensional effect because of its close relation with body movements in a limited space. Each individual will have a different feeling appealed in their body painting. Body painting has been applied to many different areas, especially to theatrical art using lights, music and performance altogether producing impromptu and experimental works. Unlike other arts such as painting, sculpture, visual and industrial arts, body painting has mobility. Since it is painted on a three-dimensional human body, it can bear originality expressing realistic objects or animals and strengthen creative functions using body lines. Moreover, geometric designs can be diversified by the sexes. As a result of analysis, geometric designs expressed in body art seemed to transcend expressions of beauty and turned out to be another way of decoration. Body art has also been used as a way to express visual integration and consolidation dynamically not by human instinct but by social changes. The needs for body art will grow as the future comes nearer and be recognized as a new and fresh value. Formative elements of geometric figures deliver visual impressions combined with human body and finally create more various types of body art in harmony of body lines.

• Natural Product Sciences
• /
• 제17권1호
• /
• pp.45-50
• /
• 2011

Sophisticated modern research tools for evaluation of medicinal plants are available but microscopic methods are one of the simplest and cheapest methods to establish the identity of the source materials. Pharmacognostical investigation of the dried, powdered and anatomical sections of the fruits of Trachyspermum roxburghianum (DC) Craib was carried out to determine its macro and microscopical characteristics along with its physical constants. Externally, the fruits, yellowish or greenish brown in colour are elongated, elliptical, slightly curved, prominently ridged and longitudinal. As seen in transectional views of the fruits from Trachyspermum roxburghianum, the mericarp has concave sides called commissural surfaces and a convex outer side called the dorsal surface. The mericarp has three primary ridges alternating with two secondary ridges on the dorsal side. On the commissural side, there are two primary ridges which are lateral in position and two secondary ridges in the commissural side. The seed is attached to the pericarp by a short stalk called a raphe. Circular, four-lobed calcium oxalate crystals are fairly abundant in the endosperm. Phytochemical studies revealed the presence of phenolic compounds, triterpenoids, proteins and sugars. The pharmacognostical profile of the fruits will assist in standardization for quality, purity and sample identification.

• 한국조경학회지
• /
• 제28권3호
• /
• pp.61-71
• /
• 2000

The purpose of this article is to investigate the forms and styles of pond at private housing in terms of diachronically influencing characteristics in the Choson Dynasty. From various literatures and records, we have selected 73 cases of pond. We have analyzed the types of pond based on square type, squared type with islets, and modified types and found the following results: 1) Chronically, shapes of pond had been chanced from the three prototypes into their features of deducting side or edge, adding a triangular or trapezoid shape, and installing more islets, and replaced their figures with gradually progressive from side having a straight lined shape to a curved one. 2) As for characteristics of arranging ponds, we found three patterns of arrangement - the juxtaposition with a similar shape of pond, juxtaposition with a different shape of pond, and the juxtaposition with a pond having different topological level in the light of the relation with a stream and a pond. We can conclude the two changed patterns of ponds at private residence in Choson Dynasty that the one had been transformed shapes of pond with sides of pond, and the others had been transformed juxtaposition with either a stream or a natural stream. From this research we can find an important implications in understanding patterns and types of garden in the Choson Dynasty from exploratory approach and in the future the relationship between topographical characteristics of private residence and Confucian ideas, and shapes of pond is needed to be examined in explanatory manner.