• Structural Engineering and Mechanics
• /
• 제13권5호
• /
• pp.533-542
• /
• 2002

This paper considers the buckling and post-buckling behavior of empty metal storage tanks under wind load. The structures of such tanks may be idealized as cantilever cylindrical shells, and the structural response is investigated using a computational model. The modeling employs a doubly curved finite element based on a theory by Simo and coworkers, which is capable of handling large displacements and plasticity. Buckling results for tanks with four different geometric relations are presented to consider the influence of the ratios between the radius and the height of the shell (R/L), and between the radius and the thickness (R/t). The studies aim to clarify the differences in the shells regarding their imperfection-sensitivity. The results show that thin-walled short tanks, with R/L = 3, display high imperfection sensitivity, while tanks with R/L = 0.5 are almost insensitive to imperfections. Changes in the total potential energy of tanks that would buckle under the same high wind pressures are also considered.

• 대한토목학회논문집
• /
• 제13권4호
• /
• pp.15-25
• /
• 1993

복합재료를 효과적으로 사용하기 위하여 복합재료 구조물의 설계기준 개발을 위한 연구가 진행되고 있다. 금속 셀의 좌굴에 대한 설계시에는 초기 결함의 영향과 탄성임계좌굴응력을 근거로 한 녹다운계수(Knock-down factor)를 정의하는 것이 중요한 과정이나 복합재료 쉘의 좌굴에 대한 설계시에는 초기 결함에 대한 민감도가 거의 연구되어 있지 않은 실정이다. 복합재료 쉘의 좌굴거동에 영향을 주는 설계변수는 많기 때문에, 쉘의 설계시 이 변수들로 인한 초기 결함 민감도를 분석하기 위하여 많은 실험을 필요로 하고 있으며 실험 이외의 다른 방법으로서는 이미 검증된 수치모델을 사용하는 것이다. 본 논문에서는 복합재료 쉘요소를 개발하는데 사용된 이론을 요약, 정리 하였으며 수치예제를 통하여 본 연구에서 제안한 쉘요소의 정확성을 검증하였다. 그리고 축방향으로 압축을 받는 GFRP 곡선형 판넬의 설계시 고려해야 하는 각 변수들을 다양하게 변화시키면서 좌굴거동에 미치는 영향을 유한요소 모델링에 의해 고찰하였다. 방법으로서 초기 결합 및 두께의 진폭을 고려한 비선형 해석과 고유치 해석을 수행하였으며 이 결과를 이용하여 녹다운 계수를 산출하였다.

• Steel and Composite Structures
• /
• 제7권4호
• /
• pp.339-354
• /
• 2007

Arched Corrugated Steel Roof (ACSR) is a kind of thin-walled steel shell, composing of arched panels with transverse small corrugations. Four full-scale W666 ACSR samples with 18m and 30m span were tested under full and half span static vertical uniform loads. Displacement, bearing capacities and failure modes of the four samples were measured. The web and bottom flange in ACSR with transverse small corrugations are simplified to anisotropic curved plates, and the equivalent tensile modulus, shear modulus and Poisson's ratio of 18m span ACSR were measured. Two 18 m-span W666 ACSR samples were analyzed with the Finite Element Analysis program ABAQUS. Base on the tests, the limit bearing capacity of ACSR is low, and for half span loading, it is 74-75% compared with the full span loading. When the testing load approached to the limit value, the bottom flange at the sample's bulge place locally buckled first, and then the whole arched roof collapsed suddenly. If the vertical loads apply along the full span, the deformation shape is symmetric, but the overall failure mode is asymmetric. For half span vertical loading, the deformation shape and the overall failure mode of the structure are asymmetric. The ACSR displacement under the vertical loads is large and the structural stiffness is low. There is a little difference between the FEM analysis results and testing data, showing the simplify method of small corrugations in ACSR and the building techniques of FEM models are rational and useful.

• 한국해양공학회지
• /
• 제22권6호
• /
• pp.75-82
• /
• 2008

Flame bending has been extensively used in the shipbuilding industry for hull plate forming In flame bending it is difficult to obtain the desired shape because the residual deformation dependson the complex temperature distribution and the thermal plastic strain. Mechanical bending such as reconfigurable press forming multi-point press forming or die-less forming has been found to improve the automation of hull plateforming because it can more accurately control the desired shape than line heating. Multi-point forming is a process in which external forces are used to form metal work-pieces. Therefore it can be a flexible and efficient forming technique. This paper presents an optimal approach to determining the press-stroke for multi-point press forming of curved shapes. An integrated configuration of Finite element analysis (FEA) and spring-back compensation algorithm is developed to calculate the strokes of the multi-point press. Not only spring-back is modeled by elastic plastic shell elements but also an iterative algorithm to compensate the spring-back is applied to adjust the amount of pressing stroke. An iterative displacement adjustment (IDA) method is applied by integration of the FEA procedure and the spring-back compensation work. Shape deviation between the desired surface and deform￡d plate is minimized by the IDA algorithm.