• 전기학회논문지
• /
• 제67권12호
• /
• pp.1619-1625
• /
• 2018

Portable electronic devices secondary batteries can cause fire and explosion due to micro-current change in addition to the situation of short-circuit inrush current, safety can not be secured with a general operation limited current fuse. Therefore, in secondary battery, it is necessary for the protector to satisfy both the limit current type operation in the open-short-circuit inrush current and the current detection operation characteristic in the micro current change situation and for this operation, a fuse for the current detection type secondary battery protection circuit can be applied. The purpose of this study is to design a protection device that operates stably in the hazardous situation of small capacity secondary battery for portable electronic devices through the design of low melting fuse elements alloy of sensing type fuse and secures stability in abnormal current state. As a result of the experiment, I-T and V-T operation characteristics are satisfied in a the design of the alloy of the current sensing type self-contained low melting point fuse and the resistance of the heating resistor. It is confirmed that it can prevent accidents of short circuit over-current and micro current change of secondary battery.

• 대한화학회지
• /
• 제11권4호
• /
• pp.159-164
• /
• 1967

균일계수 산화환원 적정에 있어서의 전위의 적정분율에 따른 변화을 나타내는 정확한 방정식을 얻었다. 이 방정식은 정정곡선이 시약의 농도에 무관계함을 알려준다. 또한 전위차적정범위 종말점의 예민도는 반전지의 기준전위의 차는 몰론, 각 반반응에 관여하는 전자수에 따라 심한 영향을 받음을 알려준다. 적정곡선의 변곡점이 당량점과 일치하지 않음을 증명하였다. 또한 적정단계에 따른 반응의 완결도를 평형상수식을 토대로 하여 해석하였다. 이 결과는 산화환원 이외의 평형에도 적용된다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권12호
• /
• pp.3815-3835
• /
• 2022

Density-based outlier detection is one of the hot issues in data mining. A point is determined as outlier on basis of the density of points near them. The existing density-based detection algorithms have high time complexity, in order to reduce the time complexity, a new outlier detection algorithm DODMD (Density-based Outlier Detection in Multidimensional Datasets) is proposed. Firstly, on the basis of ZH-tree, the concept of micro-cluster is introduced. Each leaf node is regarded as a micro-cluster, and the micro-cluster is calculated to achieve the purpose of batch filtering. In order to obtain n sets of approximate outliers quickly, a greedy method is used to calculate the boundary of LOF and mark the minimum value as LOF_min. Secondly, the outliers can filtered out by LOF_min, the real outliers are calculated, and then the result set is updated to make the boundary closer. Finally, the accuracy and efficiency of DODMD algorithm are verified on real dataset and synthetic dataset respectively.

• 분석과학
• /
• 제12권4호
• /
• pp.290-298
• /
• 1999

임피던스 위상각 적정법을 산화환원적정, 산염기적정, 착화적정 그리고 침전적정에 적용하여 정확한 종말점 검출법을 연구하였다. 일정한 교류전류가 두 백금전극사이를 통과하도록 하였고 그중 하나는 $0.1cm^2$ 또는 $0.026cm^2$의 표면적을 가진 초소형 분극전극이었고 다른 하나는 $1cm^2$의 표면적을 비분극전극을 사용하였다. 과망간산칼륨에 의한 옥살산의 산화환원적정에서 임피던스 위상각 적정법을 적용하였을때 $50{\mu}A$, 0.0005 M 이상의 농도에서 뚜렷한 종말점을 얻었고, 50 Hz 근방의 주파수 영역에서 가장 확실한 종말점을 얻을 수 있었다. NaOH에 의한 인산의 산염기 적정에서 0.001 M 수산화나트륨에 의한 0.001 M 인산의 적정시 임피던스 위상각 적정법을 적용하여 $50{\mu}A$, 주파수 25-97 Hz의 넓은 주파수 영역에서 뚜렷한 제1당량점을 얻었다. 이는 전도도의 반대 개념으로서의 임피던스의 변화량이 종말점을 기점으로 변곡하고 이에따라 위상각이 변화하는데 원인됨을 알았다. 또한 제2당량점에서는 임피던스 위상각 적정법으로 뚜렷한 종말점을 얻지 못하였다. 이는 $Na_2HPO_4$의 가수분해를 막기 위하여 적정시 과량으로 첨가되는 NaCl에 의한 방해로 생각된다. 0.1 M EDTA에 의한 0.01 M 황산구리의 착화적정시에는 위상각 측정으로 적정종말점을 찾기 보다는 "다른위상" 임피던스 Z"을 측정하여 종말점을 알아내는 것이 유리함을 알았다. $AgNO_3$에 의한 $Cl^-$의 침전적정에 있어 $100{\mu}A$, 0.1 M 농도에서 임피던스 위상각 적정법을 적용하여 명확한 종말점을 얻었고, 15-30Hz 범위에서 가장 안정적인 뚜렷한 변화를 볼 수 있었다. 그러나 0.01 M 농도에서는 임피던스 위상각의 뚜렷한 변화를 볼 수 없었다. 본 연구에서 임피던스 위상각 적정법을 산화환원적정, 산염기적정, 착화적정 그리고 침전적정시의 종말점 검출을 위해 사용하였을 때 대부분 성공적이었으며 이는 적정시 종말점을 정확히 측정하는 목적에 활용 할수 있음을 보여주는 것이다.

• 대한간호학회지
• /
• 제41권6호
• /
• pp.758-767
• /
• 2011

Purpose: This study was done to examine the threshold value of estimated height loss at which the risk of osteoporosis increases and to verify its discriminative ability in the detection of osteoporosis. Methods: It was conducted based on epidemiological descriptive methods on 732 Korean women at a public healthcare center in Seoul between July and November 2010. ANOVA, Pearson correlation, logistic regression analysis and receiver operating characteristics (ROC) curve were used for data analysis. Results: There was an age-related correlation between bone mineral density (lumbar spine: F=37.88, p<.001; femur: F=54.27, p<.001) and estimated height loss (F=27.68, p<.001). Estimated height loss increased significantly with decreasing bone mineral density (lumbar spine: r=-.23, p<.001; femur: r=-.34, p<.001). The odds ratio for the point at which the estimated height loss affects the occurrence of osteoporosis was found to increase at a cut-off value of 2 cm and the area under ROC curve was .71 and .82 in lumbar spine and femur, respectively. Conclusion: The optimal cut-off value of the estimated height loss for detection of osteoporosis was 2 cm. Height loss is therefore a useful indicator for the self-assessment and prognosis of osteoporosis.

• Current Optics and Photonics
• /
• 제8권2호
• /
• pp.170-182
• /
• 2024

The dimensional accuracy and consistency of a dual oil circuit centrifugal fuel nozzle are important for fuel distribution and combustion efficiency in an engine combustion chamber. A point cloud measurement method was proposed to solve the geometric accuracy detection problem for the fuel nozzle. An improved variance focus measure operator was used to extract the depth point cloud. Compared with other traditional sharpness evaluation functions, the improved operator can generate the best evaluation curve, and has the least noise and the shortest calculation time. The experimental results of point cloud slicing measurement show that the best window size is 24 × 24 pixels. In the height measurement experiment of the standard sample block, the relative error is 2.32%, and in the fuel nozzle cone angle measurement experiment, the relative error is 2.46%, which can meet the high precision requirements of a dual oil circuit centrifugal fuel nozzle.

• 한국정보과학회논문지:시스템및이론
• /
• 제32권11_12호
• /
• pp.705-716
• /
• 2005

패턴 인식 연구 분야에서 많은 특징점 추출 알고리즘들이 개발되었지만, 태블릿 PC나 LCD 태블릿과 같은 펜-입력 디스플레이를 위한 인터액티브 애플리케이션들은 기존과는 다른 요구사항을 가진다. 사용자 마다 다른 다양한 스케치 스타일의 대해서 세그멘테이션 및 특징점 추출을 그림을 그리는 동안 실시간에 안정적으로 수행하여야 한다. 본 논문은 사용자로부터 자유로이 입력된 펜 입력을 분할(segmentation)하기 위해 필수적인 곡률(curvature) 측정 방법을 제안한다. 이 방법은 국소적인 모양 정보(shape descriptors)만을 사용하므로 펜 입력동안 곧바로(on-the-fly) 곡률을 측정할 수 있다. 본 알고리즘은 3차원 스케치 기반 모델링 애플리케이션에서 펜 마킹 인식을 위해서 사용되었다.

• 스마트미디어저널
• /
• 제6권4호
• /
• pp.32-40
• /
• 2017

In this paper, a robust text detection method based on edge enhanced contrasting extremal region (CER) is proposed using stroke width transform (SWT) and tensor voting. First, the edge enhanced CER extracts a number of covariant regions, which is a stable connected component from input images. Next, SWT is created by the distance map, which is used to eliminate non-text regions. Then, these candidate text regions are verified based on tensor voting, which uses the input center point in the previous step to compute curve salience values. Finally, the connected component grouping is applied to a cluster closed to characters. The proposed method is evaluated with the ICDAR2003 and ICDAR2013 text detection competition datasets and the experiment results show high accuracy compared to previous methods.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.96-98
• /
• 2005

In this paper, an algorithm to compensate the distorted signals due to Current Transformer(CT) saturation is suggested, First, DWT which can be easily realized by filter banks in real-time applications is used to detect a start point and an end point of the saturation. Secondly, For enough Datas those need to use the least-square curve fitting method, the distorted current signal is compensated by the AR(autoregressive) model using the data during the previous healthy section until pick point of Saturation. Thirdly, the least-square curve fitting method is used to restore the distorted section of the secondary current. Finaly, this algorithm had a Hadware test using DSP board(TMS320C32) with Doble test device. DWT has superior detection accuracy and the proposed compensation algorithm which shows very stable features under various levels of remanent flux in the CT core is also satisfactory. And this algorithm is more correct than a previous algorithm which is only using the LSQ fitting method. Also it can be used as a MU involving the compensation function that acquires the second data from CT and PT.

• 한국전기전자재료학회논문지
• /
• 제31권6호
• /
• pp.427-432
• /
• 2018

High-capacity secondary batteries can cause explosion hazards owing to microcurrent variations or current surges that occur in short circuits. Consequently, complete safety cannot be achieved with general protection that is limited to a mere current fuse. Hence, in the case of secondary batteries, it is necessary for the protector to limit the inrush current in a short circuit, and to detect the current during microcurrent variations. To serve this purpose, a fuse can be employed for the secondary battery protection circuit with current detection. This study aims at designing a protection device that can stably operate in the hazardous circumstances associated with high-capacity secondary batteries. To achieve the said objective, a detecting fuse was designed from an alloy of low melting point elements for securing stability in abnormal current states. Experimental results show that the operating I-T and V-T characteristic constraints can be satisfied by employing the proposed current detecting self-contained low melting point fuse, and through the resistance of the heating resistor. These results thus verify that the proposed protection device can prevent the hazards of short circuit current surges and microcurrent variations of secondary batteries.