• Steel and Composite Structures
• /
• 제36권1호
• /
• pp.63-74
• /
• 2020

The present research investigates post-buckling behavior of geometrically imperfect tapered curved micro-panels made of graphene oxide powder (GOP) reinforced composite. Micro-scale effects on the panel structure have been included based on strain gradient elasticity. Micro-panel is considered to be tapered based on thickness variation along longitudinal direction. Weight fractions of uniformly and linearly distributed GOPs are included in material properties based on Halpin-Tsai homogenization scheme considering. Post-buckling curves have been determined based on both perfect and imperfect micro-panel assumptions. It is found that post-buckling curves are varying with the changes of GOPs weight fraction, geometric imperfection, GOP distribution type, variable thickness parameters, panel curvature radius and strain gradient.

• Advances in nano research
• /
• 제12권3호
• /
• pp.337-344
• /
• 2022

In this work, the vibrational frequency of two layered FGM cylindrical shell with and without the effects of internal pressure under ring support are discussed in detailed. The functionally graded materials of a cylindrical shell are designed for specific purpose and studied under various boundary conditions. The Love shell dynamical equations theory is utilized to find the relationship between the curvature displacement and strain displacement. Natural frequency vibrations are analyzed by using volume polynomial for bi-layered FGM shell under ring support both for with and without internal pressures.

• 자원환경지질
• /
• 제54권6호
• /
• pp.743-752
• /
• 2021

추가령 단층대가 발달하는 서울-경기 지역에서 단층의 3차원적인 규모를 확인하기 위해서, 곡률 분석(Curvature analysis)과 오일러 디콘볼루션(Euler deconvolution) 등의 중력장 해석 방법을 이용하여 잔여 중력이상을 해석하였다. 또한 2000년 이후 발생한 진앙과 비교하여 단열 특성을 비교하였다. 부게이상에서 포천단층은 경기 북부에서 서울의 중심부를 지나서 서해안 지역까지 연결된 약 100 km 단층으로 진앙이 빈도가 높아 활성 단층의 가능성이 있고, 단층을 경계로 동서 방향으로 7 km 정도의 변위가 관찰된다. 왕숙천단층은 서울을 중심으로 북동부와 서남부로 분절되어 있으나 지하에서 연결을 암시하는 단층 분절로 추정되는 중력이상대가 관찰된다. 특히 2010년 시흥에서 발생한 규모 3.0의 지진은 남북 방향으로 발달하는 20 km 길이의 단층에 의한 것으로 판단된다. 동두천단층의 서쪽 지역(≒5,500 m)은 중력경계면이 동쪽 지역(≒4,000 m)보다 깊게 나타나며 이는 동두천단층을 중심으로 서쪽 지역과 동쪽 지역의 지구조적인 운동이 다르다는 것을 시사한다. 동두천단층에서 발달한 파쇄대의 최대 깊이는 약 6,500 m이며 연구 지역에서는 가장 깊다. 포천 단층은 약 6,000 m, 왕숙천 단층은 약 5,000 m, 경강 단층은 약 6,000 m 깊이까지 파쇄대가 연장되는 것으로 판단된다.

• 대한치과교정학회지
• /
• 제25권1호
• /
• pp.73-85
• /
• 1995

교정치료시 치축의 개선을 위한 많은 연구와 노력이 이루어져 왔다. 본 교실에서는 치축개선을 위해 MEAW를 응용한 Multi-Vertical Loop Arch Wire(MVLAW : 엠빌로)를 수년 전부터 다수치아의 치축을 동시에 개선코자 사용해 왔다. MVLAW는 일종의 근심경사된 치아를 세우는 장치로써 open vertical loop를 3가지 종류로 변형시켜 적용시켜 왔으며 이를 각각 A, B, C형으로 명명하였다. 각 MVLAW는 .017"x.025" TMAwire로 제작되며, A형 MVLAW의 경우 각 open vertical loop의 apex를 10도 정도 벌려주어 활성화시키며(electric welding stop을 각 loop의 근심측에 위치시킨다), B형과 C형 MVLAW의 경우 open vertical loop의 원심측에 10도의 tip back bend를 형성함으로써 활성화시킨다(B형의 경우 electric welding stop이 각 loop의 원심측에 형성되는 반면 C형의 경우 electric welding stop을 형성하지 않는다). 본 연구는 구치부의 치축을 동시에 개선코자할 때 MVLAW를 3가지 종류로 분류한 후 각 MVLAW의 효과를 알아보고자 상하악 1/2악을 광탄성 모형에 재현하여 그 응력분포를 관찰하여 다음과 같은 결론을 얻었기에 보고하는 바이다. 1. A형 MVLAW의 경우 3급 견인고무를 걸지 않았을 경우 하악 제1대구치와 제2대구치 치근의 원심면에서 강한 응력분포를 나타내나 전치부에 발생한 미약한 응력분포는 3급 견인고무의 장착으로 상쇄되었다. 따라서 A형 MVLAW는 초기에 치관의 직립효과가 있는 것으로 보인다. 2. B형 MVLAW의 경우 3급 견인고무를 걸지 않았을 경우 각 치아의 근심측에 응력분포를 보이며 견인고무를 걸었을 때와 비교시 전치부에 증가된 응력분포를 보였다. 따라서 B형의 경우 초기에 치근의 직립효과가 있는 것으로 보인다. 3. C형 MVLAW의 경우 3급 견인고무를 걸지 않았을 경우 하악전치부를 제외하고는 응력분포를 나타내지 않았으나 견인고무를 걸었을 경우 주로 견치와 소구치 근심면에서 응력분포를 보였다. 따라서 C형의 경우 견인고무 사용시 초기에 견치와 소구치에서 치근의 직립효과가 있는 것으로 보인다.

• Tribology and Lubricants
• /
• 제29권1호
• /
• pp.13-18
• /
• 2013

Slider bearing is a widely used load-carrying element in the industry. While a large number of studies have investigated the effect of overall surface curvature, very few have considered sinusoidal surface. Recently, consideration of surface roughness/waviness or intentional wave design has been identified as an important issue in the manufacture of hard disk driver, mechanical seal, hydraulic machine, and etc. This study investigated the load-carrying capacity of a finite-width slider bearing with a wavy surface. Film thickness ratios, length-width ratio, ambient pressure, amplitude, and partial distribution were selected as the simulation parameters. The calculation results showed that the load-carrying capacity rapidly varied at small film thickness ratio, but the waviness near the area of minimum film thickness made much more influence with an increase in film thickness ratio. As the length-width ratio of bearing was increased, ambient pressure became more influential at small film thickness ratios. Furthermore a particular partial distribution of the wavy area led to higher load-carrying capacity than did the whole distribution. Consequently, the results of this study are expected to be of use in surface micro-machining of finite-width slider bearings.

• 복식
• /
• 제62권6호
• /
• pp.200-217
• /
• 2012

The purpose of this research is to examine the specificity of grids to define the characteristics of clothes styles in the Joseon Dynasty period. The significance of examining of the specificity of grids is to find out arbitrary types of the features of grids involved in structuring the Jeogori in the Joseon Dynasty period one by one. The Visual Linguistic Theory was introduced as a methodological tool to exquisitely analyze the characteristics of grids in deep structures of Jeogori in the Joseon Dynasty period. This theory strives to examine sample distribution, the distribution of samples by quality and the distribution of the types of ploidy features. Through the examination, the results are as follows. The grid systems of the Jeogori consisted of diverse proportion systems reaching 86 cases, that is, sequence systems composed of multi-functional, multi-combined bodies. Most ornamental grids had feature angles distributed in a range of $2-20^{\circ}$ that showed a common preference for low sloped diagonal lines or small curvature. Although the preference for certain feature angles were prominent, the feature angles that were used were generally distributed evenly among diverse feature angles to show the characteristics of separation. Therefore, Jeogori makers in the Joseon Dynasty period can be considered as having experimented with many proportion systems to show their aesthetics. In conclusion, based on the results of the examination of feature distributions and related methods to allocate ploidy features, O-type accounted for 66% and thus it was identified that the Jeogori was characterized by O-type. Therefore, it was identified that the characteristic of the Jeogori in the Joseon Dynasty period consisted of O-type fractal structures which are formative structures unique to our nation.

• 센서학회지
• /
• 제27권6호
• /
• pp.397-402
• /
• 2018

Proper seat design is critical to the safety, comfort, and ergonomics of automotive driver's seats. To ensure effective seat design, quantitative methods should be used to evaluate the characteristics of automotive seats. This paper presents a system that is capable of simultaneously monitoring body pressure distribution and surface deformation in a textile material. In this study, a textile-based capacitive sensor was used to detect the body pressure distribution in an automotive seat. In addition, a strain gauge sensor was used to detect the degree of curvature deformation due to high-pressure points. The textile-based capacitive sensor was fabricated from the conductive fabric and a polyurethane insulator with a high signal-to-noise ratio. The strain gauge sensor was attached on the guiding film to maximize the effect of its deformation due to bending. Ten pressure sensors were placed symmetrically in the hip area and six strain gauge sensors were distributed on both sides of the seat cushion. A readout circuit monitored the absolute and relative values from the sensors in realtime, and the results were displayed as a color map. Moreover, we verified the proposed system for quantifying the body pressure and fabric deformation by studying 18 participants who performed three predefined postures. The proposed system showed desirable results and is expected to improve seat safety and comfort when applied to the design of various seat types. Moreover, the proposed system will provide analytical criteria in the design and durability testing of automotive seats.

• 한국재료학회지
• /
• 제33권5호
• /
• pp.205-213
• /
• 2023

This paper reports the results of an experimental examination using X-rays to test annealing materials for lapped bearing steel (STB2), to confirm the validity of the weighted averaging analysis method. The distribution behavior for the α_𝜓-sin²𝜓 diagram and the presence or absence of differences in the peak method, half-value breadth method, and centroid method were investigated. When lapping the annealed bearing steel (STB2) material, a residual stress state with a non-directional steep gradient appeared in the surface layer, and it was found that the weighted averaging analysis method was effective. If there is a steep stress gradient, the sin²𝜓 diagram is curved and the diffraction intensity distribution curve becomes asymmetric, resulting in a difference between the peak method, half-value breadth method, and centroid method. This phenomenon was evident when the stress gradient was more than 2~3 kg/mm²/㎛. In this case, if the position of the diffraction line is determined using the centroid method and the weighted averaging analysis method is applied, the stress value on the surface and the stress gradient under the surface can be obtained more accurately. When the stress gradient becomes a problem, since the curvature of the sin²𝜓 diagram appears clearly in the region of sin²𝜓 > 0.5, it is necessary to increase the inclination angle 𝜓 as much as possible. In the case of a lapping layer, a more accurate value can be obtained by considering 𝜎₃ in the weighted averaging analysis method. In an isotropic biaxial residual stress state, the presence or absence of 𝜎₃ can be determined as the presence or absence of strain for sin²𝜓≈0.4.

• 대한치과보철학회지
• /
• 제17권1호
• /
• pp.7-21
• /
• 1979

This investigation was to analyse normal protrusive and lateral condylar pantographic records written on the sagittal plane and to study components of Fisher's angle and their interrelations. The purpose of this study was limited to (1) discussing the significance of sagittal pantographic record in diagnosis of occlusal disease and(2) basing for reasoning validity of measuring Fisher's angle which has been reported so far. As a result followings were concluded. 1. In each protrusive and lateral condylar movement path, five complicate factors such as initial straightness, distributed simple sigmoid type, simple curvature, initial tiny protruding convexity and tiny repeated sigmoid patterns were noted. Generally each condylar movement path was composed of two to three of these factors. 2. The distribution of positional interrelations of protrusive and lateral condylar paths could be divided into five categories; (a) protrusive-upper, (b) completely coinciding, (c) partially initial coinciding, (d) partially inverted crossing, and (e) completely inverting. Among these, protrusive path-upper positioned condyles were prevailed (79.2%). 3. The distribution of interrelations of protrusive and lateral condylar paths could be devided into five categories according to their distances in the course of movement. Among these, opening (95.8%) and paralleling (66.7%) were prevailing. 4. The involved number of characteristic heterogenous patterns of five categories in protrusive and lateral condylar movement recording relations at one simultaneous recordings was limited to three. However, in case of homogeneous patterns were repeated, usually three to four were included. 5. The maximum distance between protrusive and lateral condylar paths was 1.45mm at the location of 4mm advanced position from centric relation point and 3.90mm at the location of protrusive movement terminal. 6. It seemed to be that ,pantographic records should be consulted other clinical symptoms in order to make certain occlusion diagnosis. 7. At the present moment of investigation, expressing Fisher's angle as a degree revealed a lack due to inherent complexity of protrusive and lateral condylar movement paths. 8. The typical pattern of protrusive and lateral condylar paths written on a pantographic sagittal plate might be described as follows; (a) protrusive condylar path should be positioned upwardly, (b) both mainly be simple curvature, (c) interrelations mainly be opening or paralleling. 9. The mean amounts of separation between protrusive and lateral condylar movement path were $0.75{\pm}0.46$ at 4mm advanced location from centric relation and $1.74{\pm}0.64mm$ at the location of protrusive path terminal.

• 한국안광학회지
• /
• 제15권2호
• /
• pp.151-154
• /
• 2010

목적: 시축과 홍채의 편심에 따른 정밀모형안의 광학적 성능 변화를 분석하고자 하였다. 방법: 기존에 설계되어진 Radial GRIN과 Spherical GRIN 형태의 수정체를 갖는 정밀모형안을 이용하여 홍채의 위치를 코 방향으로 0.5 mm 편심시키고 시축은 절점을 기준으로 코방향으로 $5^{\circ},$ 아래로 $2.5^{\circ}$ 기울여 중심와의 위치에 상측초점이 위치하도록 하였다. 그리고, 실제의 눈과 동일하도록 광학계를 구성하여 광학적 성능 변화를 분석하였다. 결과: 전체적인 수차 분포가 실안의 성능과 비교하여 많은 차이를 나타내고 있었다. 특히, 광학계의 중앙 부위를 통과하는 영역에서 가장 큰 차이를 나타내고 있었다. 그리고, 구면수차가 가장 큰 차이를 나타냈으며, 주변부 굴절력 오차와 상면만곡은 (+) 방향으로 수차분포가 치우쳐져 있었다. 결론: 시축과 홍채 편심을 고려한 실안과 유사한 정밀모형안을 설계하는데 있어서 가장 유념해야 할 부분은, 광학계의 중앙 부위를 통과하는 영역에서의 수차 보정이다. 먼저, 가장 큰 차이를 나타내고 있는 구면수차를 보정하고, (+)방향으로 치우쳐 있는 주변부 굴절력 오차와 상면만곡은 (-)방향으로 이동하도록 고려해야 할 것이다.