• 콘크리트학회지
• /
• 제11권1호
• /
• pp.221-230
• /
• 1999

본 연구는 Belite를 사용한 고강도 철근콘크리트 보의 휨 거동에 관한 연구이다. 이를 위하여 Belite 시험체의 (1) 하중-처짐 관계와 시험체 중앙단면의 변형률 분호, (2) 하중-중립축관계와 모멘트-곡률 관계, (3) 연성평가, (4) 기존규준식과 실험값에 의한 휨강도 비교 등을 통하여 1종 보통 포트랜드 시멘트를 사용한 기준시험체(OPC)의 실험결과와 비교분석 하였다. 주요 실험변수는 콘크리트의 강도(350, 600kgf/$cm^2$)와 철근비(2D-13, 2D-16, 2D-19, 2D-22 and 2D-25)로 하였으며, 3점 재하를 실시하였다. 실험결과, 고강도${\cdot}$고유동 Belite 콘크리트를 사용한 본 실험의 경우, 전반적으로 1종 콘크리트의 휨거동 특성과 비슷한 경향을 보였다.

• 한국농공학회지
• /
• 제11권1호
• /
• pp.1580-1597
• /
• 1969

1. The field test of our experiment comparing the traditional syckle and the new manually pulled cutter showed that the working efficiency of the manually pulled cutter is about two times higher than that of the syckle. The operator can standerect while using the manually pulled cutter, thus reducing fatigue. Because of the reduction in body fatigue, the operator is able to work more total hours, making the manually pulled harvester three times more efficient than the syckle. 2. The optimum angle for the V-shaped cutter blade varies according to the number of the hiller, but in manufacturing the cutter, the range must be controlled between $35^{\circ}{\sim}45^{\circ}$. 3. The radius of curvature of the V-shaped blade is closely related to the blade angle. The best results were obtained when the radii of curvature were r=32cm with $35^{\circ}$ angle, r=153mm with $45^{\circ}$ angle, and r=220mm with $40^{\circ}$ angle. 4. The hardness distribution test of the blade showed great differences between foreign made and domestic made blades. The heat treatment method must be greatly improved for superior hardness distribution. 5. Although the efficiency of the manually pushed cutter is equal to that of the manually pulled cutter, the manually pushed cutter is not only more expensive to produce but also has a much more complicated structure than the manually pulled cutter. Because of our rural economic conditions, the power harvester which is utilized in foreign countries can not yet be introduced here. Thus, the manually pulled cutter should be popularized in our rural areas until economic conditions will allow us to introduce power harvesters. 6. The use of the manually pulled cutter will make it possible for an operator to harvest an area in only one-third of the time that it would take to harvest the same area with a traditional syckle, and it will make it possible for an operator to earn about 8,000 won for harvesting 10 Jung-bo: such benefits will help in increasing farm income and will contribute to farm modernization.

• 한국지형학회지
• /
• 제25권2호
• /
• pp.1-14
• /
• 2018

The main objective of this paper is to classify properties of the locational environment for each debris type by calculating likelihood ratio based on the correlation between the distributions for each type of debris landform. A total of 8 thematic maps, like as elevation, slope, aspect, curvature, topographic wetness index (TWI), soil drainage, geology, and landcover including with GIS spatial information generally used in this type of debris landform analysis. The results of this study showed that the block stream had a high likelihood ratio compared to talus in areas with relatively high elevation; and concerning slope, the block stream had a high likelihood ratio in a relatively low region than talus. Concerning aspect, a clear correlation could not be analyzed for each debristype, and concerning curvature, the block stream displayed a developed slope on the more concave valley than the talus. Analysis concerning TWI, the block stream displayed a higher likelihood ratio in wider sections than talus, and concerning soil drainage, the talus and block stream both displayed a high likelihood ratio in regions with well-drained soil. The talus displayed a high likelihood ratio in the order of metamorphic rocks, sedimentary rocks, and granite, while the block stream displayed a high likelihood ratio in the order of volcanic rocks, granite, and sedimentary rocks. In addition, concerning landcover, the likelihood ratio had the most concentrated distributed compared to natural bare land only concerning talus. Based on the likelihood ratio result, it can be used as basic data for extracting the possible areas of distribution for each debris type through the GIS spatial integration method.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 추계학술대회 논문집
• /
• pp.45-49
• /
• 2001

The length and the breadth or a very large floating airport are determined by airplane types and airport facilities. However, the depth affect not only the structural strength but also the functional requirement such as a possibility of taking off and landing. The optimization problem for determining the depth is to select a design so that the cost is minimized. In this paper, a general arrangement and a method to decide the depth are proposed. Strength, functional requirement, and possibility of occurrence of deck wetness and slamming are considered in order to determine the depth of structure. Hydrodynamic forces of the diffraction and radiatin problems are predicted by applying the source-dipole distribution method, and the structural responses are obtained by the finite element method.

• 한국가시화정보학회지
• /
• 제1권1호
• /
• pp.82-91
• /
• 2003

The study of swirl flow has been of technical and scientific interest because it has an internal recirculation field and its tangential velocity is related to the curvature of the streamline. The fluid flow for ducts or elbows of an internal engine has been much studied through numerical methods and experiments, but studies about swirl flow has been insufficient. Using the PIV (Particle Image Velocimetry) method, this study found the time-mean velocity distribution, time-mean turbulent intensity, with swirl and without swirl flow for Re=10,000, 15,000, 20,000, and 25,000 along longitudinal sections and the results appear to be physically reasonable. In addition, axial velocity distribution is compared with that of Jeong's, Kodadadi's and Murakami's. It was found that the highest velocity of swirl and non-swirl flow occurs in the opposite position at the center of a round tube, $\phi$=45$^{\circ}$

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1999년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.89-94
• /
• 1999

The paper first proposes an empirical algorithm for detecting dust-loaded airmass observed by Sea Wide Field-of-view Scanner (SeaWiFS). The proposed dust index formula is based on the curvature of the spectral reflectance estimated from the SeaWiFS band 4 (510 nm band) through band 8 (865 nm band) data, assuming "clear ocean water" reflectance. Evaluation of the algorithm is made over several typical Asian dust images including the ones over the Pacific in April, 1998, when a major dust event was reported. The study analyzes the performance and the characteristics of the algorithm by comparing the satellite-derived dust index images with contemporaneous columnar concentration of dust particles predicted by a numerical dust transport model. The comparison reveals several small-scale differences although their dust distribution patterns show good agreement generally.

• 한국가시화정보학회지
• /
• 제7권1호
• /
• pp.21-28
• /
• 2009

The study of swirling flow is of technical and scientific interest because it has an internal recirculation field, and its tangential velocity is related to the curvature of streamline. The fluid flow for tubes and elbow of heat exchangers has been studied largely through experiments and numerical methods, but studies about swirling flow have been insufficient. Using the particle image velocimetry(PTV) method, this study found the time averaged velocity distribution with swirl and without swirl along longitude sections and the results appear to be physically reasonable. In addition, streamwise mean velocity distribution was compares with that of other. Furthermore, other experimental investigation was performed to study the characteristics of turbulent water flow in a horizontal circular tube by using liquid crystal. 2D PIV technique is employed for velocity measurement and liquid crystal is used for heat transfer experiments in water. Temperature visualization was made quantitatively by calibrating the colour of the liquid crystal versus temperature using various approaches.

• Earthquakes and Structures
• /
• 제11권5호
• /
• pp.861-871
• /
• 2016

The Groningen gas field shows exponential growth in earthquake event counts around a magnitude M1 with a doubling time of 6-9 years since 2001. This behavior is identified with dimensionless curvature in land subsidence, which has been evolving at a constant rate over the last few decades essentially uncorrelated to gas production. We demonstrate our mechanism by a tabletop crack formation experiment. The observed skewed distribution of event magnitudes is matched by that of maxima of event clusters with a normal distribution. It predicts about one event < M5 per day in 2025, pointing to increasing stress to human living conditions.

• Progress in Superconductivity
• /
• 제3권2호
• /
• pp.183-187
• /
• 2002

In this paper we analyzed the electromagnetic behavior of high $-T_{c}$ superconductor under the quench state using finite element method. Poisson equation was used in finite element analysis as a governing equation and was solved using algebra equation using Gallerkin method. We first investigate d the electromagnetic behavior of U-type superconductor. Finally we applied our analysis techniques to 5.5 kVA meander-line superconducting fault current limiters (SFCL) which are currently developed by many power-system researcher in the world. Meshes of 14,600 elements were used in analysis of this SFCL. Analysis results show that the distribution of current density was concentrated to inner curvature in meander-line type-superconductors and maximum current density 14.61 $A/\m^2$ and also maximum Joule heat was 6,420 W/㎥. We concluded that this meander line-type SFCL was not pertinet fur uniform electromagnetic field distribution.n.

• 천문학회지
• /
• 제26권1호
• /
• pp.1-12
• /
• 1993

In order to explore the time dependence of the closure parameters of the two-fluid calculations for supernova remnants and the terminal shocks of stellar winds, we have considered a simple model in which the time evolution of the cosmic-ray distribution function was followed in the test-particle limit using the Bohm diffusion model. The particles are mostly accelerated to relativistic energy either in the free expansion phase of the SNRs or in the early phase of the stellar winds, so the evolution of the closure parameters during these early stages is substantial and should be followed correctly. We have also calculated the maximum momentum which is limited by either the age or the curvature of these spherical shocks. We found that SNRs expanding into the medium where the gas density decreases with the distance from the explosion center might be necessary to explain the observed power-law distribution of the galactic cosmic rays. The energy loss due to the escaping energetic particles has been estimated for the terminal shocks of the stellar winds.