• 한국환경과학회지
• /
• 제11권5호
• /
• pp.419-436
• /
• 2002

The current paper reports on the enhancement of O$_3$, CO, NO$_2$, and aerosols during the Asian dust event that occurred over Korea on 1 May 1999. To confirm the origin and net flux of the O$_3$, CO, NO$_2$, and aerosols, the meteorological parameters of the weather conditions were investigated using Mesoscale Meteorological Model 5(MM5) and the TOMS total ozone and aerosol index, the back trajectory was identified using the Hybrid Single-Particle Lagrangian Integrated Trajectory Model(HYSPLIT), and the ozone and ozone precursor concentrations were determined using the Urban Ashed Model(UAM). In the presence of sufficiently large concentrations of NO$\sub$x/, the oxidation of CO led to O$_3$ formation with OH, HO$_2$, NO, and NO$_2$ acting as catalysts. The sudden enhancement of O$_3$, CO, NO$_2$ and aerosols was also found to be associated with a deepening cut-off low connected with a surface cyclone and surface anticyclone located to the south of Korea during the Asian dust event. The wave pattern of the upper trough/cut-off low and total ozone level remained stationary when they came into contact with a surface cyclone during the Asian dust event. A typical example of a stratosphere-troposphere exchange(STE) of ozone was demonstrated by tropopause folding due to the jet stream. As such, the secondary maxima of ozone above 80 ppbv that occurred at night in Busan, Korea on 1 May 2001 were considered to result from vertical mixing and advection from a free troposphere-boundary layer exchange in connection with an STE in the upper troposphere. Whereas the sudden enhancement of ozone above 100 ppbv during the day was explained by the catalytic reaction of ozone precursors and transport of ozone from a slow-moving anticyclone area that included a high level of ozone and its precursors coming from China to the south of Korea. The aerosols identified in the free troposphere over Busan, Korea on 1 May 1999 originated from the Taklamakan and Gobi deserts across the Yellow River. In particular, the 1000m profile indicated that the source of the air parcels was from an anticyclone located to the south of Korea. The net flux due to the first invasion of ozone between 0000 LST and 0600 LST on 1 May 1999 agreed with the observed ground-based background concentration of ozone. From 0600 LST to 1200 LST, the net flux of the second invasion of ozone was twice as much as the day before. In this case, a change in the horizontal wind direction may have been responsible for the ozone increase.

• International Journal of Aeronautical and Space Sciences
• /
• 제8권1호
• /
• pp.10-20
• /
• 2007

For spacecraft attitude control, reaction wheel (RW) steering laws with more than three wheels for three-axis attitude control can be derived by using a control allocation (CA) approach.1-2 The CA technique deals with a problem of distributing a given control demand to available sets of actuators.3-4 There are many references for CA with applications to aerospace systems. For spacecraft, the control torque command for three body-fixed reference frames can be constructed by a combination of multiple wheels, usually four-wheel pyramid sets. Multi-wheel configurations can be exploited to satisfy a body-axis control torque requirement while satisfying objectives such as minimum control energy.1-2 In general, the reaction wheel steering laws determine required torque command for each wheel in the form of matrix pseudo-inverse. In general, the attitude control command is generated in the form of a feedback control. The spacecraft body angular rate measured by gyros is used to estimate angular displacement also.⁵ Combination of the body angular rate and attitude parameters such as quaternion and MRPs(Modified Rodrigues Parameters) is typically used in synthesizing the control command which should be produced by RWs.¹ The attitude sensor signals are usually corrupted by noise; gyros tend to contain errors such as drift and random noise. The attitude determination system can estimate such errors, and provide best true signals for feedback control.⁶ Even if the attitude determination system, for instance, sophisticated algorithm such as the EKF(Extended Kalman Filter) algorithm⁶, can eliminate the errors efficiently, it is quite probable that the control command still contains noise sources. The noise and/or other high frequency components in the control command would cause the wheel speed to change in an undesirable manner. The closed-loop system, governed by the feedback control law, is also directly affected by the noise due to imperfect sensor characteristics. The noise components in the sensor signal should be mitigated so that the control command is isolated from the noise effect. This can be done by adding a filter to the sensor output or preventing rapid change in the control command. Dynamic control allocation(DCA), recently studied by Härkegård, is to distribute the control command in the sense of dynamics⁴: the allocation is made over a certain time interval, not a fixed time instant. The dynamic behavior of the control command is taken into account in the course of distributing the control command. Not only the control command requirement, but also variation of the control command over a sampling interval is included in the performance criterion to be optimized. The result is a control command in the form of a finite difference equation over the given time interval.⁴ It results in a filter dynamics by taking the previous control command into account for the synthesis of current control command. Stability of the proposed dynamic control allocation (CA) approach was proved to ensure the control command is bounded at the steady-state. In this study, we extended the results presented in Ref. 4 by adding a two-step dynamic CA term in deriving the control allocation law. Also, the strict equality constraint, between the virtual and actual control inputs, is relaxed in order to construct control command with a smooth profile. The proposed DCA technique is applied to a spacecraft attitude control problem. The sensor noise and/or irregular signals, which are existent in most of spacecraft attitude sensors, can be handled effectively by the proposed approach.

• 대한한의학회지
• /
• 제27권3호
• /
• pp.222-226
• /
• 2006

Objective: The aim of this study was to introduce newly developed cooperation group standards of acupuncture needles for single use and to make a contribution to the future development of Korean Industrial Standards (KS) of acupuncture needles for single use. Results and Conclusion: Quality assurance and quality control with high safety profile is one of the most critical issues in medical device manufacturing. Up to now, proper attention has not been paid to this issue with respect to acupuncture needles for single use and their related devices. We, therefore, organized a committee to make guidelines to produce an acupuncture needle with high quality and safety. In the committee, we reviewed the topic from an historical viewpoint, and investigated the current situation of the standardization of acupuncture needles in other developed countries. Finally, we developed the cooperation group standards in advance of development of KS on the acupuncture needles for single use. The standards are composed of 12 sections describing: Scope, Normative references, Definitions, Materials, Configuration, Appearance and Cleanliness, Quality, Sterilization and Safety, Processing of Surface and Coating Material, Test, Packaging, and Labeling. We hope that the standards would be useful guidelines to produce high quality acupuncture needles and play an important role in the development of KS in the future.

• 대기
• /
• 제23권4호
• /
• pp.471-483
• /
• 2013

Nighttime sea fog detection from satellite is very hard due to limitation in using visible channels. Currently, most widely used method for the detection is the Dual Channel Difference (DCD) method based on Brightness Temperature Difference between 3.7 and 11 ${\mu}m$ channel (BTD). However, this method have difficulty in distinguishing between fog and low cloud, and sometimes misjudges middle/high cloud as well as clear scene as fog. Using CALIPSO Lidar Profile measurements, we have analyzed the intrinsic problems in detecting nighttime sea fog from various satellite remote sensing algorithms and suggested the direction for the improvement of the algorithm. From the comparison with CALIPSO measurements for May-July in 2011, the DCD method excessively overestimates foggy pixels (2542 pixels). Among them, only 524 pixel are real foggy pixels, but 331 pixels and 1687 pixels are clear and other type of clouds, respectively. The 514 of real foggy pixels accounts for 70% of 749 foggy pixels identified by CALIPSO. Our proposed new algorithm detects foggy pixels by comparing the difference between cloud top temperature and underneath sea surface temperature from assimilated data along with the DCD method. We have used two types of cloud top temperature, which obtained from 11 ${\mu}m$ brightness temperature (B_S1) and operational COMS algorithm (B_S2). The detected foggy 1794 pixels from B_S1 and 1490 pixel from B_S2 are significantly reduced the overestimation detected by the DCD method. However, 477 and 446 pixels have been found to be real foggy pixels, 329 and 264 pixels be clear, and 989 and 780 pixels be other type of clouds, detected by B_S1 and B_S2 respectively. The analysis of the operational COMS fog detection algorithm reveals that the cloud screening process was strictly enforced, which resulted in underestimation of foggy pixel. The 538 of total detected foggy pixels obtain only 187 of real foggy pixels, but 61 of clear pixels and 290 of other type clouds. Our analysis suggests that there is no winner for nighttime sea fog detection algorithms, but loser because real foggy pixels are less than 30% among the foggy pixels declared by all algorithms. This overwhelming evidence reveals that current nighttime sea fog algorithms have provided a lot of misjudged information, which are mostly originated from difficulty in distinguishing between clear and cloudy scene as well as fog and other type clouds. Therefore, in-depth researches are urgently required to reduce the enormous error in nighttime sea fog detection from satellite.

• 수산해양기술연구
• /
• 제26권3호
• /
• pp.265-274
• /
• 1990

한국 남해역에서 정기적인 해양 관측을 실시하고 있는 국립수산진흥원의 해양관측 정선이 외해쪽에만 치중되어 있어 연안수와 외해수간의 상호관계를 상세히 규명하기 어렵고 또한 해역에 따라서는 정선간의 간격이 커 복잡한 해황을 정확하게 파악하지 못하는 경우도 있다. 따라서 본 연구에서는 1986년 5월 23~25일간 부산수산대학교 실습선 402호를 이용하여 위와 같은 전선대 해역(제주도 동부 해역 부근)에서 자주 발생한다고 알려져 있는 수온역전 현상에 대해 DBT(Digital Momery Bathythermograph)를 사용하여 현장관측을 실시하여 보다 상세한 수온역전 구조와 그 발생 기구를 파악하고 부차적으로 이러한 수온역전 현상이 이 해역에 존재하고 있는 각 수괴들과 어떠한 관계가 있는가를 밝히고자 하였다. 그 결과, 총 67개 정점에서 수온역전이 출현한 정점은 39개이며, 그 출현빈도는 58.20%였다. 한정점에 수온역전 출현빈도는 한 개 층이 9개로서 13.42%, 두 개 층은 14개로서 20.80%, 세 개 층은 16개로서 23.88%로 나타났다. 수온역전은 대체로 수온약층 하의 수심인 40m 이심에서 일어났고 역전 수온 범위는 14~16$^{\circ}C$였다. 제주도 동부 해역에서 출현한 수온역전은 고온 고염의 쓰시마난류수가 저온 저염의 한국남안연안수 사이를 침투(intrusion)하여 생기는 수온역전과 저온 저염의 한국남안연안수가 고온 고염의 쓰시마난류수 사이를 침투하여 생기는 수온역전의 두 가지가 있다. 그리고 이러한 수온역전이 전선대에서 빈번히 발생함을 해양 관측을 통하여 구체적으로 밝혔다. 그리고 앞으로도 전선대에서 수온역전의 기구를 규명하여 각 수괴의 존재를 규명하는 문제로 계속적으로 연구해야 될 과제하고 생각한다.

• 한국지반공학회논문집
• /
• 제21권6호
• /
• pp.101-115
• /
• 2005

국내 내륙의 지형 및 지질 특성을 대표하는 두 지역인 경주와 홍성을 대상으로 전단파 속도$(V_s)$ 획득 목적의 현장 탄성파 시험을 포함한 다양한 지반 조사를 실시하여 지반 특성을 평가하고, 이를 토대로 등가 선형 및 비선형 기법의 부지 응답 해석을 수행하였다. 현행 국내 내진 설계의 근간인 미국 서부 지역과의 지반 특성 비교 결왔 국내 내륙 지역의 기반암 심도는 매우 얕고 강성은 다소 컸다. 지반 분류 기준인 심도 30m까지의 평균 전단파 속도$V_s30$는 대상 지역 내에서 $250\sim650m/s$의 좁은 범위의 분포를 보였고, 그에 따라 대부분의 부지가 C와 D 지반 조건으로 분류되었다. 부지 응답 해석 결과로부터 현행 국내 내진 설계를 위한 단주기 증폭 계수$(F_ㅁ)$는 지반 운동을 과소평가하고 중장주기 증폭계수$(F_v)$는 과대평가하고 있음을 확인하였다. 이에 따라 국내 내륙 지역에 대한 지반 증폭 계수를 재산정하고, 지역적 지반 특성을 고려하여 기존 지반 분류 C 및 D의 세부 분류와 지표면 부근 심도까지의 평균 $V_s$인 $V_s20,\;V_s15,$ 와 $V_s10$의 추가 분류 기준이 적용된 합리적 지반 분류 체계를 제안하였다. 제안된 지반 분류 체계는 현재로서는 예비적인 방안이므로 향후 보완 및 개선이 필요할 것으로 판단된다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제17권11호
• /
• pp.1599-1607
• /
• 2004

This study examined the effects of pre-slaughter fasting, chasing stress and chiller ageing on objective meat quality, and their relations to the proteome profile of longissimus muscle using 20 male Korean native black pigs. Treatments were composed of two levels of pre-slaughter feed withdrawal, two levels of pre-slaughter stress and four chiller ageing times. A 15 min chasing stress immediately prior to slaughter significantly (p<0.05) decreased detectable levels of $\mu$-calpain activity during rigor development and chiller ageing, but did not have any direct effect on objective meat quality. On the other hand, pigs fed until the morning of slaughter resulted in significantly (p<0.05) higher hunter L* value and cooking loss than those which received an 18 h feed withdrawal prior to slaughter. Cooking loss and hunter L* value were constant during 7 d of chiller ageing, followed by significant increases at 14 d. The fed animals showed a significantly (p<0.05) higher hunter a* value at both 3 and 7 d, while the other group maintained a stable redness for 7 d. WB-shear force was not affected by the pre-slaughter treatments, but had significant (p<0.05) linear reduction from 1 to 7 d. A gelbased proteome analysis was performed on selected animals for low and high hunter L* values at 1 d. Ten and five spots had greater than two-fold spot densities for the low and high hunter L* groups, respectively. The ten spots included chain A, deoxyribounclease I complex with actin, heat shock protein 27 kDa, a protein similar to cardiac $Ca^{2+}$ release channel, and myosin heavy chain, while the five spots included chain A aldehyde dehydrogenase, glycerol-3 phosphate dehydrogenase, and hemoglobin alpha chain. In general, feeding until the morning of slaughter resulted in more desirable meat color, but appeared to reduce palatability due to increased cooking loss. Proteome analysis demonstrated that various proteins were concomitantly involved in the determination of final meat color. The most noticeable observation in the current study was that various isoforms for a particular protein differed in degradation and/or expression rate depending on meat quality.

• Asian-Australasian Journal of Animal Sciences
• /
• 제33권9호
• /
• pp.1507-1519
• /
• 2020

Objective: The current research was aimed to profile the transcriptomic picture of the peripheral blood lymphocytes (PBLs) associated with immunity in Chinese Holsteins supplemented orally with coated folic acid during the periparturient period. Methods: The total of 123 perinatal cows were selected for this study and divided into three groups; group A (n = 41, 240 mg/500 kg cow/d), group B (n = 40, 120 mg/500 kg cow/d) and group C (n = 42, 0 mg/cow/d) based on the quantity of folic acid fed. Three samples of PBLs were selected from each folic acid treated group (high, low, and control) and RNA sequencing method was carried out for transcriptomic analysis. Results: The analysis revealed that a higher number of genes and pathways were regulated in response to high and low folic acid supplementation compared to the controls. We reported the novel pathways tumor necrosis factor (TNF) signaling, antigen processing and presentation, Staphylococcus aureus infection and nuclear factor (NF)-kappa B signaling pathways) and the key genes (e.g. C-X-C motif chemokine ligand 10, TNF receptor superfamily member 1A, cluster difference 4, major histocompatibility complex, class II, DQ beta, NF-kappa-B inhibitor alpha, and TNF superfamily 13) having great importance in immunity and anti-inflammation in the periparturient cows in response to coated folic acid treatment. Conclusion: Collectively, our study profiled first-time transcriptomic analysis of bovine lymphocytes and compared the involved cytokines, genes, and pathways between high vs control and low vs control. Our data suggest that the low folic acid supplementation (120 mg/500 kg) could be a good choice to boost appropriate immunity and anti-inflammation as well as might being applied to the health improvement of perinatal dairy cows.

• Asian-Australasian Journal of Animal Sciences
• /
• 제30권11호
• /
• pp.1529-1539
• /
• 2017

Objective: The objective of this study was to compare the DNA methylation profile in the longissimus dorsi muscle between Small Tailed Han and Dorper${\times}$Small Tailed Han crossbred sheep which were known to exhibit significant difference in meat-production. Methods: Six samples (three in each group) were subjected to the methylated DNA immunoprecipitation sequencing (MeDIP-seq) and subsequent bioinformatics analyses to detect differentially methylated regions (DMRs) between the two groups. Results: 23.08 Gb clean data from six samples were generated and 808 DMRs were identified in gene body or their neighboring up/downstream regions. Compared with Small Tailed Han sheep, we observed a tendency toward a global loss of DNA methylation in these DMRs in the crossbred group. Gene ontology enrichment analysis found several gene sets which were hypomethylated in gene-body region, including nucleoside binding, motor activity, phospholipid binding and cell junction. Numerous genes were found to be differentially methylated between the two groups with several genes significantly differentially methylated, including transforming growth factor beta 3 (TGFB3), acyl-CoA synthetase long chain family member 1 (ACSL1), ryanodine receptor 1 (RYR1), acyl-CoA oxidase 2 (ACOX2), peroxisome proliferator activated receptor-gamma2 (PPARG2), netrin 1 (NTN1), ras and rab interactor 2 (RIN2), microtubule associated protein RP/EB family member 1 (MAPRE1), ADAM metallopeptidase with thrombospondin type 1 motif 2 (ADAMTS2), myomesin 1 (MYOM1), zinc finger, DHHC type containing 13 (ZDHHC13), and SH3 and PX domains 2B (SH3PXD2B). The real-time quantitative polymerase chain reaction validation showed that the 12 genes are differentially expressed between the two groups. Conclusion: In the current study, a tendency to a global loss of DNA methylation in these DMRs in the crossbred group was found. Twelve genes, TGFB3, ACSL1, RYR1, ACOX2, PPARG2, NTN1, RIN2, MAPRE1, ADAMTS2, MYOM1, ZDHHC13, and SH3PXD2B, were found to be differentially methylated between the two groups by gene ontology enrichment analysis. There are differences in the expression of 12 genes, of which ACSL1, RIN2, and ADAMTS2 have a negative correlation with methylation levels and the data suggest that DNA methylation levels in DMRs of the 3 genes may have an influence on the expression. These results will serve as a valuable resource for DNA methylation investigations on screening candidate genes which might be related to meat production in sheep.

• 미술이론과 현장
• /
• 제7호
• /
• pp.125-163
• /
• 2009

The artworks of Socialist Realism of the former Soviet Union, with the beginning of the 21st century, are gaining a new attention from art collectors. One reason for this might consist in the fact that relevant art pieces exemplify the ways in which they visualize ideas on the basis of their high-profile art tradition and also in which they integrate their utopian ideals with mysticism. These aspects of the Soviet art goes far beyond the wide-spread assumption that their art, as a means of propaganda, principally represents a political allegiance to the system. With Stalin coming into power in the 1930s, the artistic trend of Socialist Realism obtained a nationwide sympathy and support from people, giving birth to a new art which essentially corresponded to the demands of the political power. An official art current of the USSR over the period from the 1930s to 1950s, Socialist Realism was in tandem with the Communist commitment to the party and popularity, symbolizing a loyalty to the cause. It was thus characterized by plainness and lucidity so that ordinary people could gain easy access to art. Its salient feature, over an entire range of art, was an optimistic pursuit of a utopian dream. Therefore, it tallied with the popular sentiment for a Communist paradise, giving form to their beliefs in human agency working at the materialist world and also to such abstract concepts as force, fitness, and beauty by adding even mythical ideals. Its main subject matter includes harvest feasts of collective farms, imaginary socialist cities, grand marches of heroic laborers and in this way it served as a propaganda for a sacred utopia of socialist totalitarianism. On the other end of the spectrum, however, rose the second camp of art, which put an emphasis on bona-fide artistic activities of plastic art and on an artist's personal expression and freedom, as opposed to the surface optimism of Socialist Realism. Central to the Russian Avant Garde art, which prized the above-mentioned values, were Malevich's Geometric Abstraction and A. Rodchenko's Constructivism. Furthermore, in the transitional era of the late 20th century and the 21st century it was recognized that film art or electronic media art, rather than traditional genre of paintings, would function as a more efficient way of propaganda. These new genres were made possible by ridiculing the stereotypes of the Russian lifestyle and also by ignoring ethical or professional dimensions of artworks. That is, they reinvented themselves into a sort of field art, seemingly degrading the quality of artworks and transforming them into artifacts or simulacres in the very sense of post-modernism. The advent of the new era brought about the formation and occupation of pop culture of the younger generations, calling into question the idea of art as the class-determined. It also increased the attention to field art, which extensively found way to modern art centers, galleries, and exhibition projects. It can be stated that this was a natural outcome of human nature.