• Progress in Superconductivity
• /
• v.8 no.1
• /
• pp.87-92
• /
• 2006

The effects of Ba and Ce addition has been investigated in YBCO prepared by trifluoroacetate(TFA) metalorganic depostition(MOD) method. Precursor solutions with cation ratios of Y:Ba:Cu:Ce=1:2+x:3:x(x=0, 0.05, 0.1 and 1.5) have been prepared by adding an excess amount of cerium and barium. Coated film was calcined at lower temperature under a moisture-containing oxygen atmosphere. Superconducting YBCO films have been obtained by performing conversion heat treatment at temperature of $780{\sim}810^{\circ}C$ under a moisture-containing Ar(1,000 ppm oxygen) atmosphere. It has been shown that the critical current($I_c$) of YBCO film was degraded by doping of Ba and Ce atoms. But $I_c$ was increased as the amount of doped Ba and Ce content increased from 5% to 15 %. It was observed that there was little increase of a flux pinning force with Ba and Ce addition in YBCO film prepared by TFA-MOD process.

• Journal of Ecology and Environment
• /
• v.45 no.4
• /
• pp.264-276
• /
• 2021

Background: Salt marshes provide a variety of ecosystem services; however, they are vulnerable to human activity, water level fluctuations, and climate change. Analyses of the relationships between plant communities and environmental conditions in salt marshes are expected to provide useful information for the prediction of changes during climate change. In this study, relationships between the current vegetation structure and environmental factors were evaluated in the tidal flat at the southern tip of Ganghwa, Korea, where salt marshes are well-developed. Results: The vegetation structure in Ganghwa salt marshes was divided into three groups by cluster analysis: group A, dominated by Phragmites communis; group B, dominated by Suaeda japonica; and group C, dominated by other taxa. As determined by PERMANOVA, the groups showed significant differences with respect to altitude, soil moisture, soil organic matter, salinity, sand, clay, and silt ratios. A canonical correspondence analysis based on the percent cover of each species in the quadrats showed that the proportion of sand increased as the altitude increased and S. japonica appeared in soil with a relatively high silt proportion, while P. communis was distributed in soil with low salinity. Conclusions: The distributions of three halophyte groups differed depending on the altitude, soil moisture, salinity, and soil organic matter, sand, silt, and clay contents. Pioneer species, such as S. japonica, appeared in soil with a relatively high silt content. The P. communis community survived under a wider range of soil textures than previously reported in the literature; the species was distributed in soils with relatively low salinity, with a range expansion toward the sea in areas with freshwater influx. The observed spatial distribution patterns may provide a basis for conservation under declining salt marshes.

• Food Science of Animal Resources
• /
• v.44 no.2
• /
• pp.464-482
• /
• 2024

This study aimed to determine the effects of humectants on moisture content, water activity, tenderness, color, microbiological analysis, protein denaturation, and oxidation of jerky. A thorough search for papers published in scientific journals that examined the impacts of humectants on jerky was carried out using Web of Science, Google Scholar, PubMed, and Science Direct. Only 14 studies matched inclusion requirements. They were used in the meta-analysis to synthesise quantitative findings. In the current investigation, jerky produced with beef, poultry, goat, or pork was used. The standardised mean difference (SMD) between treatments with humectants and controls was examined to investigate the effects of humectants using random-effects models. Heterogeneity was investigated using meta-regression. A subgroup analysis was carried out for significant factors. Results revealed that the addition of humectants had no significant impact on water activity, pH, fat, ash, CIE L^*, or CIE a^* (p>0.05). However, humectant addition significantly increased moisture (SMD=1.28, p<0.05), CIE b^* (SMD=1.67, p<0.05), and overall acceptability (SMD=1.73, p<0.05). It significantly decreased metmyoglobin (SMD=-0.96, p<0.05), shear force (SMD=-0.84, p<0.05), and protein (SMD=-1.61, p<0.05). However, it was difficult to get a firm conclusion about how humectants affected the myofibrillar fragmentation index, total plate count, and 2-thiobarbituric acid-reactive substances because there were fewer than ten studies. To sum up, the proper use of humectants in jerky demands careful attention to both type and quantity, needing a delicate balancing act with other contributing factors.

• Korean Chemical Engineering Research
• /
• v.56 no.1
• /
• pp.1-5
• /
• 2018

In this work, we study the ion conductivity by analyzing the impedance to the high current density range that the PEMFC (Proton Exchange Membrane Fuel Cell) is actually operated. The effect of GDL (Gas Diffusion Layer)presence on impedance was investigated indirectly by measuring hydrogen permeability. When the RH (Relative Humidity)was higher than 60% in the low current range (< $80mA/cm^2$), the moisture content of the polymer membrane was sufficient and the ion conductivity of the membrane was not influenced by the current change. However, when RH was low, ion conductivity increased due to water production as current density increased. The ion conductivity of the membrane obtained by HFR (High Frequency Resistance) in the high current region ($100{\sim}800mA/cm^2$)was compared with the measured value and simulated value. At RH 100%, both experimental and simulated values showed constant ion conductivity without being influenced by current change. At 30~70% of RH, the ionic conductivity increased with increasing current density and tended to be constant.

• Korean Journal of Soil Science and Fertilizer
• /
• v.35 no.6
• /
• pp.335-343
• /
• 2002

Methods of bedsoil analysis were difficult to be applied universally because use and material of bedsoil are diverse from country to country. Korean Standard Methods for Bedsoil Analysis was developed to measure the water content, water retention, and saturated hydraulic conductivity. Fifty-three samples for horticultural bedsoil and nine samples for paddy rice bedsoil in the current market were collected. Water content of bedsoil was determined using gravimetric method through $105^{\circ}C$ oven-dry for 16 hours, but different calculations between horticultural and paddy rice bedsoils were chosen according to different predominant component, plant residue or mineral. Water content percentage of horticultural bedsoil was calculated as [(weight of sample before oven-dry - weight of sample after oven-dry)/(weight of sample before oven-dry)]${\times}100$, while that of paddy rice bedsoil as [(weight of sample before oven-dry - weight of sample after oven-dry)/(weight of sample after oven-dry)]${\times}100$. Water retention was measured at water potential -0.5, -1, -3, -5, -7, -10 kPa by Sandbox method and saturated hydraulic conductivity was measured by constant head method using acryl cylinder (${\Phi}5cm{\times}L\;20cm$). By new 'Korean Standard Methods of Bedsoil Analysis', the average water content of horticultural bedsoil was obtained 46.34%(w/w) and that of paddy rice bedsoil 16.89%. For horticultural bedsoil, easily available water(EAW), water buffering capacity(WBC), and optimal matric potential(OMP) was estimated at 28.4%, 7.01%, and -5.60 kPa, respectively. Optimal moisture content was 44.41% and average saturated hydraulic conductivity for bedsoils was estimated at $28.4cm\;min^{-1}$.

• Environmental Engineering Research
• /
• v.23 no.2
• /
• pp.164-174
• /
• 2018

Corrosion of copper alloys (copper, bronze and brass) in soil was evaluated at ambient temperature using various methods such as electrochemical impedance spectroscopy (EIS), polarization curves and Scanning Electron Microscopy (SEM) coupled with Energy Dispersive Spectroscopy microanalysis measurements. Three equivalent circuits were separately used to interpret the obtained impedance spectra. The EIS measurements indicated that the polarization resistance of all electrodes increases with increasing the immersion time. SEM showed a presence of three layers of corrosion products with various composition and morphology covering each electrode. In addition, it was found that at 20% of moisture content the $R_p$ values and the current density of all electrodes in the studied soil give the following order: copper > bronze > brass. Good consistency between the data obtained from EIS and PP measurements was observed.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.26 no.2
• /
• pp.207-218
• /
• 1998

A site survey in two apartment complexes and a nursery experiment were carried out in this study to provide basic data of the long-pending growth characteristics of major landscaping trees, such as Picea abies, Pinus parviflora, Metasequoia glyptostroboides, Magnolia denudata, Acer buergerianum and Acer palmatum. According to the main results, the survival rates were very low, reflected by the average survival rate of the four species was 95% at the nursery site. And, it was presumed that the site conditions of two apartment complexes for tree growth were very inferior to those of the nursery site, taking into consideration that the increment percents of growth factors of the tree species at the nursery site were relatively higher than those of the apartment complexes. The distribution patterns of the current growth factors of trees showed a normal distribution. The regression equation of breast diameter on diameter at root collar showed especially high predictability. And, it was thought that the most critical limiting environmental factors on tree growth at the apartment complexes were found to be alkaline pH caused by excessive Ca, high percent base saturation, insufficiency of available moisture content, bad drainage due to inferior soil texture, high soil hardness, lack of organic matter and shortage of cation exchange capacity in soil.

• Culinary science and hospitality research
• /
• v.22 no.8
• /
• pp.99-108
• /
• 2016

This study was conducted to investigate the effect of Chinese artichoke powder on the physicochemical properties and the sensory characteristics of yanggaeng. According to the increasing contents of Chinese artichoke powder, the $^{\circ}Brix$ value and pH levels of yanggaeng were significantly decreased whereas the moisture contents of yanggaeng was significantly increased. The result of color measurement shown that L value of groups containing Chinese artichoke powder was lower than that of control group, but a value and b value of groups containing Chinese artichoke powder were higher. Texture measurement score in terms of cohesiveness, chewiness, and brittleness for yanggaeng were significantly decreased according to the levels of added Chinese artichoke powder content. The contents of total polyphenol, DPPH radical scavenging activity, and NSA of groups containing Chinese artichoke powder were higher than those of control group. As Chinese artichoke powder increased, antioxidative activity also became bigger. Sensory evaluation scores in terms of appearance, odor, taste, texture, and overall preference of groups with 2% and 4% of Chinese artichoke powder did not show any significantly differences when compared to the control group. Based on these findings, current study suggest that addition of 4% Chinese artichoke powder was the best substitution ratio for yanggaeng.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.13 no.2
• /
• pp.43-50
• /
• 2007

The production, distribution, and consumption of Korean medicinal herbs have increased every year because of an increase of health considerations. But there are no sufficient standardization procedures in packaging and distribution systems related to these herb products. The standardization of packaging material and dimension could be a good addition for establishing proper quality control methods for Korean medicinal herbs. Medicinal herbs deteriorate under physical, chemical and biological hazards such as oxidation, textural change under high moisture content, color change by light, sanitation problems by insect invasion and contamination. Packaging standardization with proper functional packaging materials is critical to ensure the qualities of medicinal herbs. Also, storage and distribution efficiencies can be improved by achieving packaging dimension standardization. This review summarizes recent research trends related to quality evaluation methods and major quality deterioration factors of Korean medicinal herbs. This paper also offers reviews on some of problems and challenges in current packaging and distribution systems of medicinal herb industries and briefly suggests advanced quality control methods through packaging standardization.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.2
• /
• pp.186-195
• /
• 2015

This study aims at modeling the rotary drying of wood chips in co-current mode and estimating the drying time of larch (Larix kaemferi) wood chip. Drying data were obtained in a lab. scale fixed bed dryer operating with an air velocity of 1 m/sec. and at hot air inlet temperatures of $100^{\circ}C$, $200^{\circ}C$, and $300^{\circ}C$. The lab. scale fixed-bed drying rates for small, medium and large size larch wood chips that had been dried from 40% wet-based moisture content (MC) to 10% MC at $200^{\circ}C$ drying temperature were 17.3 %/min., 10.2 %/min. and 5.5 %/min., respectively. It was predicted that larch large size wood chips could be dried from 40% MC to 10% MC in about 23.0, 34.6, and 44.7 minutes at $300^{\circ}C$, $200^{\circ}C$ and $150^{\circ}C$, respectively. Expected drying times for medium size chips were about 8.6, 11.2 and 13.2 minutes and those for small size chips were 4.3, 5.5 and 6.4 minutes, respectively.