• 한국수자원학회논문집
• /
• 제56권2호
• /
• pp.103-113
• /
• 2023

하천 합류부는 서로 다른 지형학적 특성과 수리학적 특성을 가지는 두 개의 하천이 하나로 합쳐지는 구간으로 급격한 흐름의 변화 및 퇴적물의 유입과 수리학적 지형변화가 발생하는 구간이다. 합류부 구간에서는 물질의 종류 또는 온도 차로 유체의 흐름이 밀도 차이로 발생하게 되는데 이것을 밀도류라고 한다. 밀도 차이에 의해 성층이 생긴 수체혼합거동을 파악하기 위해서는 본류 및 지류의 일정 구간을 포함하는 합류부 구간에 대한 정밀한 계측 및 관찰이 필요하다. 이러한 수체 혼합에 대한 종합적인 분석은 유속장 및 유량 정보를 취득하여 파악할 수 있지만, 성층류가 흐르는 하천의 서로 상이한 물리적 특성과 수질특성을 가지는 수체의 혼합양상 및 그에 따른 물질혼합양상을 파악하는데 한계가 있다. 따라서 본 연구에서는 합류부 구간에서의 수온 분포를 통하여 밀도류를 파악하고자 한다. 하천의 광범위한 데이터 중 연직 자료와 수표면 자료를 취득하였고, 이를 통해 합류부의 성층현상을 확인하고자 하였다. ADCP를 보트 측면에 설치하여 저속운행으로 수리량을 측정하는 방식과 YSI를 이용해 측선설치 없이 측선 선정 후 보트를 이용하여 흐름에 직각인 방향으로 이동하며 실시간 농도를 측정하는 방식으로 얻은 연직자료 중 수온, 전도도(Conductivity) 등의 직독식 센서 데이터 값을 사용하여 수온 차에 따른 수체혼합 패턴을 분석하여 합류부의 혼합양상을 분석하고자 하였다. 본 연구는 기존 수질 측정의 한계였던 1차원적인 측정결과가 나타내는 분석결과를 2차원적으로 보완이 가능하며, 비교 분석한 결과를 토대로 밀도류에 따른 혼합양상 결과가 지니는 혼합패턴을 분석한다면 향후 하천 하류구간의 취수 시스템에 많은 도움을 줄 뿐만 아니라 합류부 구간의 혼합패턴에 따라 수층 내 성층구간의 현황조사와 하천 합류부의 혼합특성 파악하여 합류구간의 수질 관리방안이나 수체 흐름특성을 제시할 수 있을 것으로 사료된다.

• 농업생명과학연구
• /
• 제50권3호
• /
• pp.119-127
• /
• 2016

본 연구는 현재 우리나라에서 이뤄지고 있는 차량소독방법의 미흡한 점을 개선하여 국내 축산농가에서 지속적으로 발생하고 있는 각종 전염병을 차단할 수 있는 소독시스템을 개발하는데 필요한 노즐형태와 동력분무기의 적정토출압력을 구명하기 위해 실시되었다. 실험은 2012년 1월 10일부터 2012년 2월 28일까지 진행되었고, 모든 성능실험은 5회 반복으로 측정하였으며, 실험대상은 A사, B사, C사의 제품을 사용했다. 각 회사별 제품에 대해 분무량, 분무각, 피복면적비, 노즐별 분무압력을 측정한 결과, 분무량, 분무각, 피복면적비는 분무기 토출압력이 증가함에 따라 증가하였다(p<0.05). 위 결과와 각 제품의 노즐 위치별 분무량, 분무각, 피복면적비를 측정한 결과를 종합해봤을 때, 노즐의 형태는 부채꼴형 노즐 보다 원추형 노즐의 성능이 우수한 것으로 판단되었으며, 피복면적비를 고려했을 때 분무기의 적정토출압력은 20kg/㎠ 정도면 충분할 것으로 판단되었다.

• 한국수자원학회논문집
• /
• 제56권11호
• /
• pp.775-784
• /
• 2023

최근 이상기후로 수공 구조물의 설계빈도를 상회하는 극한호우의 증가 경향이 뚜렷함에 따라 과거에 설계된 농업용 저수지의 안전성 검토가 필요하다. 그러나 한국농어촌공사 관할 일정 규모 이상의 저수지를 제외한 지자체 관리 저수지는 비상시 긴급 방류가 가능 저수지는 전무하다(13,685개소). 이러한 경우 이동식 사이펀을 현장에 빠르게 투입하여 사전 방류하는 방법이 긴요하며, 본 연구에서는 사전 및 긴급방류 기능을 동시에 수행할 수 있는 직경 200 mm, 최소 수위차 6 m, 420(m²/h), 10,000(m²/day)의 이동식 사이펀을 경주시 유금저수지를 대상으로 적용 가능성을 평가하였다. 테스트베드인 유금 저수지는 1945년 준공되어 공용기간이 78년 정도 경과한 시설물로 수문학적 안정성 분석 결과 현재 댐마루 구간의 최저높이는 27.15(EL.m)로 검토 홍수위 27.44(EL.m) 보다 0.29 m 낮아 제방을 통한 월류 가능성이 있고 여유고도 1.72 m 부족한 것으로 나타나 수문학 안전성을 확보하지 못하는 것으로 검토되었다. 유금저수지는 수위-유량 계측이 주기적으로 이루어진지 얼마 되지 않아 저수지의 수위-유량 관계 곡선식을 명확하게 확립하기 어려워 수위-용적 곡선을 임의로 도출하였으며 도출된 곡선을 기반으로 중소규모 노후저수지 운영 알고리즘을 통해 사전방류시간, 여수로 방류량을 고려하고 빈도별 홍수량에 따른 저수지 월류시간을 예측함으로써 사전에 대피 시간을 확보하고 붕괴위험을 저감할 수 있는 기술을 확보하였다. 직경 200 mm 이동식사이펀 1열 기준, 30년 빈도 홍수량 유입 시 상한수위 기준 80% 수준(약 30,000 m²)을 유지하면서 주민대피 시간(약 1시간)을 확보할 수 있는 최적 사전방류시간은 12시간 이전으로 분석되었다. 중소규모 노후저수지를 대상으로 사이펀 활용 사전방류기술 및 저수지 운영 알고리즘에 따라 이상기후 대비 사전에 방류를 시행하고 관리자의 의사결정을 돕는다면, 저수지 붕괴 위험지역 내의 주민들의 안전을 확보하고 주민대피 지원체계 구축을 통해 주민들의 불안감 해소, 저수지 위험상황 시 위험회피 수단 제공으로 위험요소 감소가 충분히 가능하다.

• 항공우주정책ㆍ법학회지
• /
• 제33권2호
• /
• pp.225-266
• /
• 2018

2017년 한국소비자원에 접수된 항공여객운송서비스 관련 피해구제 접수건수는 1,252건으로 2016년 1,262건 대비 0.8% 감소하여 2013년 이후 처음으로 감소세를 나타냈다. 그리고 2017년 한국소비자원에 접수된 항공여객운송서비스 분야의 피해구제 접수건 가운데 444건(35.4%)이 합의가 성립되었으며, 합의가 성립되지 않은 건 중에서 정보제공 상담 기타로 종결된 경우가 588건(47.0%)으로 가장 많았고, 소비자분쟁조정위원회에 조정 신청된 경우가 186건(14.9%)이었다. 항공서비스 소비자 피해구제와 분쟁해결을 위한 규정을 두고 있는 주요입법으로는 항공사업법, 소비자기본법 등이 있는데, 항공사업법에서 항공교통사업자의 피해구제절차와 처리계획의 수립 및 이행 그리고 피해구제 신청 접수 및 처리, 항공교통이용자 보호기준의 고시 등에 관하여 규정하고 있으며, 소비자기본법에서 소비자상담기구의 실치 운영, 한국소비자원의 피해구제, 소비자분쟁의 조정, 소비자분쟁해결기준의 제정 등에 관하여 규정하고 있다. 항공서비스 소비자 피해구제 절차로는 항공교통사업자의 피해구제 접수 처리, 소비자상담센터의 상담 및 피해구제 접수 처리, 한국소비자원의 합의권고, 소비자분쟁조정위원회의 분쟁조정제도 등이 있다. 현행 항공서비스 소비자 피해구제 및 분쟁조정 제도에는 항공사업법 상 항공교통사업자의 피해구제계획 수립 및 이행 의무의 면제, 항공부문 소비자분쟁해결기준 상 운송 불이행 및 지연의 경우 면책 등에 대하여 문제점이 있고, 그리고 소비자기본법상 소비자분쟁조정의 절차진행 및 조정성립에 대하여 한계점이 있다. 따라서 항공서비스 소비자에 대한 적절한 피해구제와 원활한 분쟁조정을 위하여 관련 제도의 개선방안을 제시하면 다음과 같다. 첫째 항공서비스 소비자 피해구제 관련 법규의 정비이다. 항공사업법 상 항공교통사업자의 피해구제계획 수립과 이행 의무의 면제규정이 수정되어야 할 것이다. 또한 항공서비스 소비자 보호와 피해구제에 관한 법 규정의 체계화와 전문성 제고를 위해 미국연방규칙 14 CFR 및 EU의 EC 261/2004 규칙과 유사한 별도 입법을 마련할 필요가 있을 것이다. 둘째 항공서비스 소비자 분쟁해결기준의 개선이다. 항공부문 소비자분쟁해결기준 상 항공사업자의 운송 불이행 및 운송지연의 경우 면책사유의 발생 원인이 불가항력이었는지를 규명하여 면책여부를 판별하여야 하고, 상법 항공운송편 및 1999년 몬트리올 협약에 규정된 면책사유와 같이 수정되어야 하며, 대체편이 제공된 운송 불이행의 경우와 운송지연에 대하여 배상기준을 통일하는 것이 필요할 것이다. 셋째 항공서비스 소비자 피해구제를 위한 정보제공의 강화이다. 항공관련 정부기관 및 유관기관들은 항공사 및 공항과 협력하여 항공서비스 소비자 피해구제를 위한 법규와 정책 등 다양한 정보를 항공교통이용자에게 보다 신속 명확하게 제공해야 할 것이다. 넷째 소비자분쟁조정의 효력 등에 관한 보완이다. 분쟁조정에 대한 수락 의사표시가 없을 경우 수락한 것으로 보는 것은 부당하므로 이의신청제도를 추가할 필요가 있을 것이다. 또한 소비자분쟁조정위원회 이외 다른 분쟁조정기구에 중복으로 분쟁해결을 신청한 경우 피해구제 대상에서 제외하고 있으나 당사자가 조정기관을 선택할 수 있도록 해야 할 것이다. 그리고 소비자분쟁이 조정을 통하여 효율적으로 해결될 수 있도록 조정성립률을 높일 수 있는 제도적 방안을 강구할 필요가 있을 것이다. 다섯째 항공서비스 소비자 중재제도의 도입이다. 소비자분쟁 조정제도의 한계점을 보완할 수 있는 방안으로 소비자 중재제도를 도입하되, 소비자기본법 상 중재 도입안과 중재법 상 소비자중재 도입안이 있는데, 후자의 방안이 적합할 것으로 생각된다. 결론적으로, 정책과제로서 항공서비스 소비자의 피해 예방 및 구제를 강화하는 법 제도를 마련하고, 항공서비스 선진화를 위한 소비자 중심의 정책을 수립 추진해야 할 것이다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제32권4호
• /
• pp.401-410
• /
• 2009

목 적 : 골반 및 요추 엑스선검사는 진단 엑스선검사 중 생식선을 포함하고 있고 환자가 받는 방사선량이 많은 검사로서 우리나라에는 골반 및 요추 엑스선검사에서의 환자선량 권고량이 마련되어 있지 않다. 따라서 국내 의료기관에서의 골반 및 요추 엑스선검사 시 환자가 받는 방사선량을 측정 평가하고 골반 및 요추 엑스선검사에서 환자의 방사선 방어 최적화를 위한 환자선량 권고량을 확립한다. 방 법 : 전국 125개 의료기관에서 골반 전후면 촬영, 요추 전후면 및 측면 촬영시 촬영조건과 진단영상정보를 조사 분석하고 환자가 받는 입사표면선량을 유리선량계를 사용하여 측정 평가한다. 환자가 받는 방사선량 중 제3사분위값에 해당하는 선량값을 의료기관에 권고할 골반 및 요추 엑스선검사에서의 환자선량 권고량으로 확립한다. 결 과 : 전국 125개 의료기관에서 골반 및 요추 엑스선검사 시 진단영상정보를 조사하고 환자가 받는 입사 표면선량을 측정한 결과 골반 전후면 엑스선검사에서는 관전압이 60~97 kVp, 평균 75 kVp를 사용하였고, 관전류-시간곱(mAs)는 8~123 mAs, 평균 29.7 mAs를 사용하였다. 요추 전후면 및 측면 엑스선검사에서는 관전압을 각각 65~100 kVp, 평균 78 kVp와 70~109 kVp, 평균 87 kVp를 사용하였고, mAs도 각각 10~100 mAs, 평균 35.2 mAs와 8.9~300 mAs, 평균 64.1 mAs를 사용하였다. 골반 및 요추 엑스선검사에서의 환자가 받는 입사표면선량을 측정한 결과, 골반 전후면 엑스선검사에서는 최소값 0.59 mGy, 최대값 12.69 mGy, 평균값 2.88mGy이었으며, 제1사분위값은 1.91 mGy, 중앙값은 2.67 mGy, 제3사분위값은 3.42 mGy이었다. 요추 전후면 엑스선검사에서는 최소값 0.64 mGy, 최대값 23.84 mGy, 평균값 3.68 mGy이었으며, 제1사분위값은 2.41 mGy, 중앙값은 3.40 mGy, 제3사분위값은 4.08 mGy이었다. 요추 측면 엑스선검사에서는 최소값 1.90 mGy, 최대값 45.42 mGy, 평균값 10.08 mGy이었으며, 제1사분위값은 6.03 mGy, 중앙값은 9.09 mGy, 제3사분위값은 12.65 mGy이었다. 결 론 : 우리나라의 의료기관에서 골반 전후면 엑스선검사에서 의료기관에 권고할 환자선량 권고량은 3.42 mGy, 요추 전후면 엑스선검사에서는 4.08 mGy, 요추 측면촬영에서는 12.65 mGy로 세계보건기구 등 6개 국제기구가 공동으로 권고한 골반 전후면 검사 10 mGy, 요추 전후면 검사 10 mGy 및 요추 측면 검사 30 mGy 보다는 낮았다.

• 수산해양기술연구
• /
• 제40권4호
• /
• pp.268-281
• /
• 2004

본 연구는 실제 정치망 어장에서의 조류에 따른 어구 형상 변형을 추정하고, 그 변형을 최소화시키며 어구의 기본 기능을 유지시키는데 필요한 수중 현상과 어구 내부용적을 적절하게 유지할 수 있는 설계의 기본 자료를 얻기 위한 목적으로 회류 수조에서 모형실험을 실시하였으며, 흐름에 따른 대뜸의 멍줄에 작용하는 장력, 정치망 내의 유속변화와 그물형상의 변화를 측정하였다. 1. 유속이 0.0m/s에서 0.6m/s로 증가 할 때에 유속 (v)에 따른 장력(R)의 실험식은 운동장 조상의 경우 R=$19.58v^{1.98}$($r^2$=0.98) 원통 조상인 경우, R=$26.90v^{1.72}$($r^2$=0.95)이었다. 2. 유속변화는 흐름이 망내부를 통과함에 따라 감소하여 운동장이 조상인 경우, 제1원통내부에서 0.1m/s일 때 약 70%, 0.2m/s일 때 60%, 0.3m/s일 때 약 50%, 0.4~0.6m/s에서는 약 40%정도로 초기유속에 비해 감소하였다. 원통이 조상측일 경우, 제2원통을 통과한 흐름은 초기 유속의 약 30~60%로 급격히 감소하였고, 제1원통에서는 약 20~30% 비탈그물에서는 약 10~20%정도 감소하였고, 운동장내에서 다시 유속이 증가하였다. 3. 운동장이 흐름의 조상측인 경우, 운동장그물의 기울기 변화량은 0~70$^{\circ}$까지, 비탈그물은 0~63$^{\circ}$까지 변화하였고, 조하측인 제2원통은 0~47$^{\circ}$까지 변화하였다. 유속이 증가함에 따른 까래그물의 깊이 변화는 초기 깊이에 보다 제1원통과 제2원통이 약 0~45%정도, 비탈그물이 약 0~37% 정도로 감소하였다. 4. 원통이 흐름의 조상측인 경우, 제2원통의 기울기 변화량은 약 0~70$^{\circ}$까지, 비탈그물은 약 0~55$^{\circ}$까지, 조하측인 운동장은 0~50$^{\circ}$까지 였다. 까래그물의 깊이 변화는 초기 깊이와 비교해서 제1원통은 약 0~35%, 제2원통은 약 0~20%, 비탈그물은 약 0~35%까지 감소하였으며, 유속이 0.5m/s이상에서 비탈그물이 원통 입구까지 부상하여, 원통 입구를 90%이상 막았다. 5. 어구의 변형을 최소화하고 전개용적을 증가시키기 위해서는 입구 및 운동장 부분에서는 힘출의 저조시 수심 위치에 중량추를 부착하고, 운동장 바깥쪽과 제1원통의 섶장과 까래그물 제2원통의 바깥쪽, 비탈그물의 까래에 부가 중량추를 부착하는 것이 필요할 것으로 판단된다.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
• /
• pp.1051-1054
• /
• 1993

The International Atomic Energy Agency's Statute in Article III.A.5 allows it“to establish and administer safeguards designed to ensure that special fissionable and other materials, services, equipment, facilities and information made available by the Agency or at its request or under its supervision or control are not used in such a way as to further any military purpose; and to apply safeguards, at the request of the parties, to any bilateral or multilateral arrangement, or at the request of a State, to any of that State's activities in the field of atomic energy”. Safeguards are essentially a technical means of verifying the fulfilment of political obligations undertaken by States and given a legal force in international agreements relating to the peaceful uses of nuclear energy. The main political objectives are: to assure the international community that States are complying with their non-proliferation and other peaceful undertakings; and to deter (a) the diversion of afeguarded nuclear materials to the production of nuclear explosives or for military purposes and (b) the misuse of safeguarded facilities with the aim of producing unsafeguarded nuclear material. It is clear that no international safeguards system can physically prevent diversion. The IAEA safeguards system is basically a verification measure designed to provide assurance in those cases in which diversion has not occurred. Verification is accomplished by two basic means: material accountancy and containment and surveillance measures. Nuclear material accountancy is the fundamental IAEA safeguards mechanism, while containment and surveillance serve as important complementary measures. Material accountancy refers to a collection of measurements and other determinations which enable the State and the Agency to maintain a current picture of the location and movement of nuclear material into and out of material balance areas, i. e. areas where all material entering or leaving is measurab e. A containment measure is one that is designed by taking advantage of structural characteristics, such as containers, tanks or pipes, etc. To establish the physical integrity of an area or item by preventing the undetected movement of nuclear material or equipment. Such measures involve the application of tamper-indicating or surveillance devices. Surveillance refers to both human and instrumental observation aimed at indicating the movement of nuclear material. The verification process consists of three over-lapping elements: (a) Provision by the State of information such as - design information describing nuclear installations; - accounting reports listing nuclear material inventories, receipts and shipments; - documents amplifying and clarifying reports, as applicable; - notification of international transfers of nuclear material. (b) Collection by the IAEA of information through inspection activities such as - verification of design information - examination of records and repo ts - measurement of nuclear material - examination of containment and surveillance measures - follow-up activities in case of unusual findings. (c) Evaluation of the information provided by the State and of that collected by inspectors to determine the completeness, accuracy and validity of the information provided by the State and to resolve any anomalies and discrepancies. To design an effective verification system, one must identify possible ways and means by which nuclear material could be diverted from peaceful uses, including means to conceal such diversions. These theoretical ways and means, which have become known as diversion strategies, are used as one of the basic inputs for the development of safeguards procedures, equipment and instrumentation. For analysis of implementation strategy purposes, it is assumed that non-compliance cannot be excluded a priori and that consequently there is a low but non-zero probability that a diversion could be attempted in all safeguards ituations. An important element of diversion strategies is the identification of various possible diversion paths; the amount, type and location of nuclear material involved, the physical route and conversion of the material that may take place, rate of removal and concealment methods, as appropriate. With regard to the physical route and conversion of nuclear material the following main categories may be considered: - unreported removal of nuclear material from an installation or during transit - unreported introduction of nuclear material into an installation - unreported transfer of nuclear material from one material balance area to another - unreported production of nuclear material, e. g. enrichment of uranium or production of plutonium - undeclared uses of the material within the installation. With respect to the amount of nuclear material that might be diverted in a given time (the diversion rate), the continuum between the following two limiting cases is cons dered: - one significant quantity or more in a short time, often known as abrupt diversion; and - one significant quantity or more per year, for example, by accumulation of smaller amounts each time to add up to a significant quantity over a period of one year, often called protracted diversion. Concealment methods may include: - restriction of access of inspectors - falsification of records, reports and other material balance areas - replacement of nuclear material, e. g. use of dummy objects - falsification of measurements or of their evaluation - interference with IAEA installed equipment.As a result of diversion and its concealment or other actions, anomalies will occur. All reasonable diversion routes, scenarios/strategies and concealment methods have to be taken into account in designing safeguards implementation strategies so as to provide sufficient opportunities for the IAEA to observe such anomalies. The safeguards approach for each facility will make a different use of these procedures, equipment and instrumentation according to the various diversion strategies which could be applicable to that facility and according to the detection and inspection goals which are applied. Postulated pathways sets of scenarios comprise those elements of diversion strategies which might be carried out at a facility or across a State's fuel cycle with declared or undeclared activities. All such factors, however, contain a degree of fuzziness that need a human judgment to make the ultimate conclusion that all material is being used for peaceful purposes. Safeguards has been traditionally based on verification of declared material and facilities using material accountancy as a fundamental measure. The strength of material accountancy is based on the fact that it allows to detect any diversion independent of the diversion route taken. Material accountancy detects a diversion after it actually happened and thus is powerless to physically prevent it and can only deter by the risk of early detection any contemplation by State authorities to carry out a diversion. Recently the IAEA has been faced with new challenges. To deal with these, various measures are being reconsidered to strengthen the safeguards system such as enhanced assessment of the completeness of the State's initial declaration of nuclear material and installations under its jurisdiction enhanced monitoring and analysis of open information and analysis of open information that may indicate inconsistencies with the State's safeguards obligations. Precise information vital for such enhanced assessments and analyses is normally not available or, if available, difficult and expensive collection of information would be necessary. Above all, realistic appraisal of truth needs sound human judgment.

• 대한시과학회지
• /
• 제20권4호
• /
• pp.579-588
• /
• 2018

목적 : 대한민국 비정시 군인의 안경 청구 및 보급체계를 분석하고 개선방안을 제시하고자 하였다. 방법 : 국군에서 제공되는 비정시 군인용 안경의 청구 및 보급체계를 조사하고 분석하였다. 비정시 군인 37명을 대상으로 평소 착용하는 일반안경의 굴절력을 기준으로 보급된 파편방호용 및 방독면용 내부 장착안경의 굴절력과 교정시력을 측정하였다. 원거리 교정시력이 1.0 이하인 대상에게 완전교정을 실시하고 교정시력의 변화를 비교하였다. 현 청구 및 보급에 따른 문제점의 개선방안을 제시하고 시력관리 전문 인력의 활용방안을 모색하였다. 결과 : 비정시 군인에게 보급되는 안경은 입대할 때 착용한 안경의 굴절력과 동일하게 복제되었다. 37명의 비정시 군인에게 보급된 일반안경, 파편방호용 및 방독면용 내부 장착 안경의 등가구면굴절력은 각각 $-3.47{\pm}1.69D$, $-3.52{\pm}1.66D$ 및 $-3.55{\pm}1.63D$였으며 완전교정 등가구면굴절력은 $-3.79{\pm}1.66D$로 모두 유의한 차이를 보였다(p<0.05). 일반안경, 파편방호용 및 방독면용 내부 장착 안경에 의한 원거리 고대비 및 저대비 교정시력(logMAR)은 각각 $0.06{\pm}0.80$, $0.21{\pm}0.82$, $0.15{\pm}0.74$, $0.34{\pm}0.89$ 및 $0.10{\pm}0.70$, $0.22{\pm}0.27$이었으며, 완전교정 후에는 각각 $0.02{\pm}1.05$, $0.10{\pm}0.07$, $0.09{\pm}0.92$, $0.26{\pm}0.10$ 및 $0.04{\pm}1.00$, $0.19{\pm}1.00$으로 증가하였다. 일반안경과 방독면 안경의 저대비 시력을 제외하고 유의한 차이를 보였다(p<0.05). 안경의 청구, 제작 및 보급은 각각 5 단계로 구성되며, 최초 청구로부터 보급까지 약 2주 이상 소요되는 것으로 나타났다. 결론 : 비정시 군인의 안경 보급체계는 1) 굴절검사 체계의 결여, 2) 청구부터 보급까지 소요시간이 길고, 3) 보급 안경의 굴절력이 정확하지 못한 것으로 나타났다. 이를 개선하기 위해 단기적으로 관리 인력의 굴절력 측정에 대한 전문지식의 교육이 필요하고, 장기적으로 안경처방 표준체계의 도입과 시력관리 전문 인력의 확보가 필요할 것이다.

• Asia Marketing Journal
• /
• 제13권2호
• /
• pp.99-130
• /
• 2011

최근, 제품 디자인의 차별화 방법 중 하나로 제품에 명화(名畵)를 차용하는 이른바 '명화 마케팅(masterpiece marketing)'이 각광받고 있다. 본 연구는 시장에서 널리 사용되고 있는 명화 마케팅에 체계적이고 과학적인 방법을 적용하여, 명화에서 유발되는 감정이 제품 속성 평가에 영향을 미치는 중요한 요소임을 밝혀내고자 하였다. 본 연구는 명화가 가지는 본질적 기능인 감상자의 정서 유발에 초점을 맞추어, 차용된 명화에서 유발되는 감정(affect)이 해당 제품 평가에 어떠한 영향을 미치는 가에 대한 가설을 세웠다. 보다 구체적으로 기존 감정 연구에서 제시된 감정의 두 축, 쾌(pleasure), 환기(arousal)의 수준에서 차이가 나는 명화가 각각 제품에 차용되었을 경우, 소비자의 제품 평가에 어떠한 영향을 미치는 가에 대해 제품의 유형(실용재/ 쾌락재)과 각 속성(실용적 속성/ 쾌락적 속성)에 대한 평가의 차이를 통해 살펴보았다. 분석 결과, 긍정 감정을 야기하는 명화에 대한 선호도가 부정감정을 야기하는 명화에 대한 선호도보다 높았으며, 제품 유형에 관계없이 긍정감정을 유발하는 명화를 제품에 차용하였을 경우 부정감정을 유발하는 명화를 제품에 차용했을 때보다 제품태도가 더 높게 나타났다. 또한 이를 바탕으로 명화가 유발하는 감정이 제품태도에 미치는 영향은 명화에 대한 선호도에 의해 매개됨을 밝혀냈다. 감정의 또 다른 한 축인 환기 수준이 높은 명화를 실용재인 우유에 차용했을 경우, 쾌락적 속성에 대한 평가가 높아진 반면, 환기 수준이 낮은 명화를 차용했을 경우에는 실용적 속성에 대한 평가가 높아졌다. 그러나 쾌락재인 초콜릿의 경우 이러한 차이가 발견되지 않아 제품에 차용된 명화에서 유발되는 감정 수준(환기 수준)이 제품 유형에 따라 각각 다른 영향을 미치고 있음을 확인할 수 있었다. 본 연구는 다음과 같은 점에서 의의가 있다. 첫째, 시장에서 널리 사용되고 있는 명화 마케팅에 체계적이고 과학적인 방법을 적용하여, 명화에서 유발되는 감정이 제품 속성 평가에 영향을 미치는 중요한 요소임을 밝혀내었다. 둘째, 긍정/부정 감정에 초점을 두어 진행되었던 기존 연구에서 더 나아가 감정의 또 다른 축인 환기가 제품 속성평가에 차별적인 영향을 미칠 수 있음을 확인하였다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.