• Journal of Animal Science and Technology
• /
• 제47권2호
• /
• pp.277-282
• /
• 2005

The current study was conducted to investigate the effect of organic selenium in mushroom cultured media (MCM) on beef quality. Each five of 20 Hanwoo steers(20 - 24 month, approximately 613 kg) were assigned to four levels of the selenium content(O.l, 0.3, 0.6, 0.9 dry matter based ppm), and the feeding treatments were enforced for 12 weeks. The results showed that m. longissimus from the 0.1 ppm feeding supplementation had greatly higher intramuscular fat content than other treatments(13.1 %). In meat color, the 0.1 ppm treatment showed the lowest lightness(CIE $L^*$)(P< 0.05) and had a tendency to have lower redness(CIE $a^*$). The treatment had no noticeable effect on moisture, protein, and ash content, cooking loss, water-holding capacity and purge loss. The 0.3 ppm treatment resulted in the toughest meat(assessed by WB-shear force) with 4.54 kg / inch', while other groups showed a similar toughness ranging from 3.3 to 3.7 kg/ inchl . Sensory characteristics in juiciness and flavor intensity had a tendency of increasing as organic selenium concentration increased, but tenderness was not influenced by the contents. The result indicated that the organic selenium feeding affects meat qualities to different extent, and further study is required to examine anti-oxidant effect of selenium in vivo.

• Journal of Animal Science and Technology
• /
• 제58권7호
• /
• pp.25.1-25.6
• /
• 2016

Background: The current study was designed to investigate the effect of supplementation of Flaxseed (Linumusitatisimum) oil on libido and semen quality of Nilli-Ravi buffalo bulls. Methods: In this study, 12 adult healthy bulls kept at the Semen Production Unit, Qadirabad district Sahiwal, were used. These bulls were divided into three equal groups, A, B and C. Group A was kept as control, while in groups B and C supplementation of feed was provided by using flaxseed oil @125 ml/day and 250 ml/day,respectively for 12 weeks. Two ejaculates per animal were collected at 0 day then 5th, 6th, 7th, 8th, 9th, 10th, 11th and 12th week of treatment. In this way a total 216 samples were taken, and each semen sample was evaluated for color, volume, mass activity, percent motility, sperm cell concentration per ml, percentage of live sperm, and plasma membrane integrity. Libido of bulls was also evaluated before every collection. Results: Analysis of data revealed that these parameters were significantly (P < 0.01) increased in flax oil treated animals as compared to control. Conclusion: It was concluded from the present study that flax seed oil has beneficial effects on reproductive health of buffalo bull.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.159-161
• /
• 2007

Geostationary Ocean Color Imager (GOCI), the world-first ocean remote sensing instrument on geostationary Communication, Ocean, Meteorological Satellite (COMS), will be able to take a picture of a large region several times a day (almost with every one hour interval). We, KORDI, are in charge for developing the GOCI data processing system (GDPS) which is the basic software for processing the data from GOCI. The GDPS will be based on windows operating system to produce the GOCI level 2 data products (useful for oceanographic environmental analysis) automatically in real-time mode. Also, the GDPS will be a user-interactive program by well-organized graphical user interfaces for data processing and visualization. Its products will be the chlorophyll concentration, amount of total suspended sediments (TSS), colored dissolved organic matters (CDOM) and red tide from water leaving radiance or remote sensing reflectance. In addition, the GDPS will be able to produce daily products such as water current vector, primary productivity, water quality categorization, vegetation index, using individual observation data composed from several subscenes provided by GOCI for each slit within the target area. The resulting GOCI level 2 data will be disseminated through LRIT using satellite dissemination system and through online request and download systems. This software is carefully designed and implemented, and will be tested by sub-contractual company until the end of this year. It will need to be updated in effect with respect to new/improved algorithms and the calibration/validation activities.

• Toxicological Research
• /
• 제22권4호
• /
• pp.375-380
• /
• 2006

Microcystin-LR (MC-LR) is a cyanobacterial hepatotoxin mainly produced by Microcystis aeruginosa. The current study examined the effects of a single intraperitoneal dose of MC-LR in rats. Female Sprague-Dawley rats were intraperitoneally injected with MC-LR ($100{\mu}g/kg$ body weight) and they were sacrificed at 0, 20, 40, 80, 160 min, or 12 h after injection. Clinically, animals showed lethargy and had ruffled hair beginning at 40 min post injection. In the gross findings, liver was enlarged and its color was changed into dark red beginning at 40 min post injection. Microscopically, dissociation of centrilobular hepatocytes and hemorrhage was observed in the hepatic central legions and such pathological changes were then extended to the portal regions of liver by time course manner. Interestingly at 80 min after MC-LR injection, the entrapped eosinophilic materials that may be necrotic fragments of dissociated hepatocytes were found in the capillaries of lung and renal glomerulus. Ultrastructurally, microvilli of the hepatocytes were disrupted or lost at all time points. Furthermore, the Disse space and gap junctions were widened beginning at 40 min post injection. These results suggest that liver is the major target organ of MC-LR and isolated hepatocytes by the effects of such hepatotoxin may secondarily reduce the physiological function of lung and kidney.

• Journal of Welding and Joining
• /
• 제31권1호
• /
• pp.43-50
• /
• 2013

The spot welds of Transformation Induced Plasticity (TRIP) steels are prone to interfacial failure and narrow welding current range. Hard microstructures in weld metal and heat affected zone arenormally considered as one of the main reason to accelerate the interfacial failure mode. There fore, detailed observation of weld microstructure for TRIP steels should be made to ensure better weld quality. However, it is difficult to characterize the microstructure, which has similar color, size, and shape using the optical or electron microscopy. The atomic force microscope (AFM) can help to analyze microstructure by using different energy levels for different surface roughness. In this study, the microstructures of resistance spot welds for AHSS are analyzed by using AFM with measuring the differences in average surface roughness. It has been possible to identify the different phases and their topographic characteristics and to study their morphology using atomic force microscopy in resistance spot weld TRIP steels. The systematic topographic study for each region of weldments confirmed the presence of different microstructures with height of 350nm for martensite, 250nm for bainite, and 150nm for ferrite, respectively.

• 한국도로학회논문집
• /
• 제2권4호
• /
• pp.111-122
• /
• 2000

우리나라 도로중 PMS가 구축된 도로는 현재, 고속도로와 국도가 있다. 그러나 많은 시(市)에서 도로의 효율적인 관리를 위해 요구되는 시도로 PMS는 아직 없는 실정이다. 따라서, 본 논문에서는 시단위에 적용가능한 Prototype PMS 전산시스템을 개발 제시하였다. 개발한 PMS는 기본적으로 PC 수준에서 운영 가능하도록 구성하였으며 GIS 기능을 이용하여 사용자가 쉽게 포장상태나 유지보수 현황 및 계획을 이해할 수 있게 하였다. 본 PMS의 기능상 구성은 크게 조회, 분석, 자료관리, 출력 부분으로 구축하였다. 특히, 분석과정의 주논리(보수우선순위결정, 보수공법결정)부분은 필요시 사용자가 각 항목의 criteria 값을 수정 할 수 있게 하여 시스템운영이 경직되지 않도록 배려하였다. PMS 데이터베이스의 항목은 시도로 PMS의 규모 및 목적을 고려하여 선정하였다. 또한 PMS에서 사용된 도로 관리길이 및 위치 지정체계는 노선을 기준으로 기본 100m길이의 section으로 분할관리하였으며, 위치 지정체계 방식은 reference points 방식을 기본으로 사용하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.47-47
• /
• 2011

There have been numerous efforts to enhance the efficiency of light-emitting diodes (LEDs) by using low dimensional structures such as quantum dots (QDs), wire (QWRs), and wells (QWs). We demonstrate QD/QWR/QW hybrid structured LEDs by using nano-scaled pyramid structures of GaN with ~260 nm height. Photoluminescence (PL) showed three multi-peak spectra centered at around 535 nm, 600 nm, 665 nm for QWs, QWRs, and QDs, respectively. The QD emission survived at room temperature due to carrier localization, whereas the QW emission diminished from 10 K to 300 K. We confirmed that hybrid LEDs had zero-, one-, and two-dimensional behavior from a temperature-dependent time-resolved PL study. The radiative lifetime of the QDs was nearly constant over the temperature, while that of the QWs increased with increasing temperature, due to low dimensional behavior. Cathodoluminescence revealed spatial distributions of InGaN QDs, QWRs, and QWs on the vertices, edges, and sidewalls, respectively. We investigated the blue-shifted electroluminescence with increasing current due to the band-filling effect. The hybrid LEDs provided broad-band spectra with high internal quantum efficiency, and color-tunability for visible light-emitting sources.

• 분석과학
• /
• 제8권4호
• /
• pp.675-682
• /
• 1995

Thin films of buckminsterfullerene($C_{60}$) formed by solution drop casting on Pt foil electrode surfaces were studied by cyclic voltammetry(CV) in acetonitrile(MeCN) containing quaternary ammonium or alkali-metal salts as supporting electrolyte. The electrochemical behaviors of $C_{60}$ films are found to be strongly dependent on the nature of the supporting electrolytes, especially with tetrabutyl ammonium perchlorate (TBAP, $NBu_4ClO_4$), and tetrabutyl ammonium tetrafluoroborate ($TBABF_4$, $NBu_4BF_4$). Reasonably stable films are formed into which electrons can be injected. The interaction of $C_{60}$ film with the quaternary ammonium cation may produce the fulleride salts $(TBA^+)(C{_{60}}^-)$ and $(TBA^+)_2(C{_{60}}^{2-})$. The bulk electroreduction with a controlled potential to generate the soluble $C{_{60}}^{3-}$ anions(dark red-brown color) is followed by electrooxidative deposition to produce a neutral $C_{60}$ film on the surface. The peak currents($I_{pc}$ and $I_{pa}$) of these thin film were dramatically decreased with repetitive potential scanning. These results could be explained by the adsorption-desorption phenomena and ion pairing interaction of reduced species($C{_{60}}^-$, and $C{_{60}}^{2-}$) onto the electrode surface. The peak current changes and peak potential shifts of the thin $C_{60}$ film in cyclic voltammograms formed from solution were observed by varying scan rates.

• 수산해양기술연구
• /
• 제55권4호
• /
• pp.392-401
• /
• 2019

This study describes how the illustration book of Korean coastal and offshore fishing boats was published. The illustration book provides information on fisheries which need boats for their fishing operation. The book contains 25 fishing boats belonging to 15 offshore fisheries and six boats belonging to five coastal fisheries totalling 31 boats belonging to 20 kinds of fisheries. Until now, no books were available in Korea on fishing boats which provided illustrated descriptions of their use in fishing. We carried out field and literature surveys of fishing boats for three years (2016-2018) and the results were compiled into three-dimensional modeling images with schematic drawings of fishing boats, along with text explanations. The particulars and technical drawings of lines, general arrangement (GA), fishing gears and methods are collected and summarized. All fishing boats are modeled with 3D color graphics. The particulars and names of the main items of the fishing equipment are presented besides structural parts. In addition the fishing gear, fishing season and grounds, number of crews and target species for each boat are correctly described. The illustration book of Korean coastal and offshore fishing boats will contribute to understanding the current status of fishing techniques in Korea and will assist in developing new types of fishing boats.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권9호
• /
• pp.4491-4509
• /
• 2017

The present paper proposes a novel dynamic system for hand gesture recognition. The approach involved is comprised of three main steps: detection, tracking and recognition. First, the gesture contour captured by a 2D-camera is detected by combining the three-frame difference method and skin-color elliptic boundary model. Then, the trajectory of the hand gesture is extracted via a gesture-tracking algorithm based on an occlusion-direction oriented linear extrapolation predictor, where the gesture coordinate in next frame is predicted by the judgment of current occlusion direction. Finally, to overcome the interference of insignificant trajectory segments, the longest common subsequence (LCS) is employed with the aid of velocity information. Besides, to tackle the subgesture problem, i.e., some gestures may also be a part of others, the most probable gesture category is identified through comparison of the relative LCS length of each gesture, i.e., the proportion between the LCS length and the total length of each template, rather than the length of LCS for each gesture. The gesture dataset for system performance test contains digits ranged from 0 to 9, and experimental results demonstrate the robustness and effectiveness of the proposed approach.