• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.816-819
• /
• 2006

One of the most difficult parameters to measure in the sea is current speed and direction. Recently, efforts are being made to estimate the ocean current vectors by utilizing sequential satellite imageries. In this study, we attempted to estimated sea surface current vector (sscv) by using satellite ocean color imageries of SeaWifs around the Korean Peninsula. This ocean color image data has 1-day sampling interval and spatial resolution of 1x1 km. Maximum cross-correlation method is employed which is aimed to detect similar patterns between sequential images. The estimated current vectors are compared to the surface geostrophic current vectors obtained from altimeter of sea level height data. In utilizing the color imagery data, some limitations and drawbacks exist so that in warm water region where phytoplankton concentration is relatively lower than in cold water region, estimation of sscv is poor and unreliable. On the other hand, two current vector fields agree reasonably well in the Korean South Sea region where high concentration of chlorophyll-a and weak tide is observed. In the future, with ocean color images of shorter sampling interval by COMS satellite, the algorithm and methodology developed in the study would be useful in providing the information for the ocean current around Korean Peninsula.

• Journal of the Optical Society of Korea
• /
• v.16 no.4
• /
• pp.449-456
• /
• 2012

For two well-known modulation methods, stepwise current modulation (SCM) and pulse width modulation (PWM), the effects of driving current modulation conditions on chromaticity were experimentally investigated in a white LED lighting system. For the experimental implementation of both SCM and PWM, a white LED lighting was fabricated using phosphor converted (PC) white light emitting diodes (LEDs) and a driving circuit module was developed. By using them, the variations of illuminance, color coordinates, and spectrum were evaluated under various forward current conditions. Through the analysis in color coordinates, yellow shift in SCM and blue shift in PWM were observed on chromaticity diagrams with increasing average driving current. In addition, in order to analyze color deviation quantitatively, color distance before and after current increase, and the correlated color temperature (CCT) were calculated. As a result, for the white LED lighting in both modulation conditions, the maximum difference in the calculated CCT was obtained close to 1000 K. It means that careful consideration is required to be taken in the design of illumination systems to avoid serious problems such industrial accidents.

• Journal of Animal Science and Technology
• /
• v.48 no.2
• /
• pp.315-324
• /
• 2006

This research was conducted to clarify the characteristics of electrochemical decolorization of effluent discharged from a biological animal wastewater treatment process and to finally establish parameters or mode for optimum operation of electrolysis system. Average color unit of wastewater was about 1,200 and DSA(Dimensionally Stable Anode) was used as electrode. Experiments were performed with two different operation conditions or modes, fixed voltage-free current(Run A) and free voltage-fixed current(Run B). Color removal rate was proportional to the electrode area and electrical conductivity, and an equation subject to them at a condition of fixed voltage was derived as follows; Ct=C0ekt, k=[{0.0121×ａ(dm2)× c(mS/cm)}+0.0288], [where, C0: initial color, Ct: color unit after treatment for t, k: reaction coefficient, t: time(min.), ａ: electrode area, c: conductivity]. From the study on the effects of current density on color removal, it was revealed that the removal efficiency of color was function of the current density, showing direct proportion. However, when considered energy consumption rate, maintenance of low current density was an economical way. Based on the obtained results, it was concluded that supplementation of electrolyte is not necessary for the removal of color from the effluent of secondary treatment process and operation with the mode of free voltage-fixed current, rather than operation with fixed voltage-free current mode, would be an efficient way to increase the removal performance and capacity per consumed energy.

• Journal of Broadcast Engineering
• /
• v.21 no.5
• /
• pp.760-769
• /
• 2016

This paper proposes a hybrid LED driving circuit and its control method for extension of the color gamut of LED. The proposed hybrid LED driving circuit provides the constant current by switching regulation in the high current and by linear regulation in the low current through LED. Furthermore, the magnitudes of the high current and low current were controlled by CC(Continuous Current) control method and PWM(Pulse Width Modulation) control method, respectively. We experimentally confirmed that the current through RGB LED is linearly controlled to 2% maximum current ratio by varying PWM in the proposed driving circuit and control method. As a result of the measurement of the output light color in CIE1976 chromaticity coordinates, we confirmed that the color, which not be expressed by the existing method, uniformly expressed. We confirmed that the color, which can not be expressed by the existing method, was uniformly output and verified that the color gamut was expanded by the low current controlled by the proposed driving circuit and control method.

• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.3
• /
• pp.225-235
• /
• 2002

The color stability of current prosthetic composites is unknown, even though the quality of composite materials has been improving. This study examined the intrinsic color stability of various current prosthetic resins (ceramic-polymers) after an accelerated aging process and the extrinsic color stability after immersion in a coffee solution. By comparing the amount of discoloration after aging with that without aging, the effect of the accelerated aging process on external discoloration could be evaluated. Three current prosthetic composites (Artglass, Targis, Sculpture), one light polymerized direct composite (Z100) and one dental porcelain control (Ceramco) were assessed. The color changes (${\Delta}$E) of all the specimens were determined using the CIE $L^{*}a^{*}b^{*}$ color order system with a reflected spectrophotometer. The results were as follows: 1. The prosthetic composite materials subjected to the accelerated aging test showed no significant difference in color changes (p >.05). 2. In the coffee solution immersion test after the aging process, the color changes of the Targis and Artglass groups were not different from that of the Z100 group, which showed the highest color change. 3. In the immersion only test, a significantly high color change was observed in the sculpture glazing group. 4. The aging process influenced on the color changes more in the Targis, Artglass and Z100 groups than in the Sculpture and Ceramco groups.

• Journal of the Korean Society of Costume
• /
• v.39
• /
• pp.257-269
• /
• 1998

Comparison the literature of Korean Shroud with Current Shroud are as follows. 1. The Mo(冒) and m were not included in current shroud. Onang(五囊), Ch'im(枕), Kum(衾) and Kyo(絞) were included in current shroud. 2. Terms of the current shroud were various than the literature of korean shroud. 3. The cloths of the literature of korean shroud were Chu, Chung, P'o(布), Ch'o and Kyon, etc. But the cloths in the current shroud were Myongchu, Sambe and Kongdan. The color of the literature of korean shroud were various, but in the current shroud was light color center upon the white color. 4. The shape of the current shroud was various.

• Korean Institute of Interior Design Journal
• /
• no.19
• /
• pp.144-150
• /
• 1999

The color planning in the hospital could influence the patient's improvement and lead the users from room to room. This study shows the data of present colors used in the hospitals. In order to get the data, we surveyed and analyzed the current color usages of the present interior of hospitals by the individual data from the projectors. The color scheme is analyzed by the rooms which are the common room, the ward, and the examination room along the projectors. It is also analyzed by the finishes of the hospitals, and is addressed to the present color scheme by the means of the hue value, and chroma. The color scheme in the interior design of hospital is an important factor for the hospital users. It has to more sincerely considered to use colors effectively in the hospital interior since people use their organ of vision greatly when they sense things. According to the data, this study is proposed to the effective color plan which is considered psychologically and emotionally about the human activities, in the interior design of hospitals for the future.

• Proceedings of the Optical Society of Korea Conference
• /
• 1996.09a
• /
• pp.49-49
• /
• 1996

• Journal of Environmental Science International
• /
• v.32 no.6
• /
• pp.465-475
• /
• 2023

In this study, we evaluated the treatment efficiency of livestock wastewater by altering the current density using boron-doped diamond (BDD) electrodes. As the current density was adjusted from 10 to 35 mA/cm2, the removal efficiency of organic matter increased from 22.2 to 71.5%. Similar to that of organic matter, the removal efficiency of color increased with increasing current density up to 85.7%, indicating a higher removal efficiency for color than that of organic matter. The removal efficiency of ammonia nitrogen increased from 14.6 to 53.3% as the current density increased, but it was lower than that of organic matter. In addition, the removal of organic matter, color, and ammonia nitrogen followed first-order reactions, according to the reaction rate analysis. The energy consumption ranged from 4.87 to 8.33 kWh/kg COD, and it was found that the organic matter removal efficiency was more efficient at high current densities. Based on various analyses, the optimal current density was 20 mA/cm2, and the corresponding energy consumption was 6.824 kWh/kg COD.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.4
• /
• pp.1673-1681
• /
• 2018

In this paper, the fabrication of a white light-emitting diode (WLED) package capable of producing different color rendering indexes (CRI ($R_a$)) using different types of phosphors (YAG:Ce, Silicate, Nitride, LuAG) for the LEDs is presented. The color quality is evaluated based on the current and temperature variation conditions. The evaluation method for color quality compares the existing CIE 13.3 method and the new IES TM-30-15 method. The CRI ($R_a$) defined in the conventional CIE 13.3 has the disadvantage. This cannot offer any information relevant to the user's preference. However, the newly proposed IES TM-30-15 method suggests the additional measure related to user's preference such as Color Gamut ($R_g$). The present experimental results obtained using the IES TM-30-15 show that the color quality of the WLEDs using green and red phosphors are better than that of the WLEDs using yellow phosphor, but their luminous efficacies are lower. The color quality of WLEDs using green and red phosphors are more stable than that of the WLEDs using yellow phosphor, for current and temperature variations, and it is verified that the phosphor causes this change. The evaluation method for color quality, based on IES TM-30-15, is proved to be capable of overcoming the problems of the existing evaluation methods by this study.